Y -- REHABILITATION OF THE SPILLWAY AT LOCK AND DAM 6, CONSTRUCT MONOLITH JOINTS, REMOVE AND REPLACE BAFFLE BLOCKS, AND PROVIDE EROSION PROTECTION.

Notice Date

December 21, 2001

Contracting Office

U.S. Army Corps of Engineers, Contracting Division, 190 Fifth Street East, St. Paul, MN 55101-1638

ZIP Code

55101-1638

Solicitation Number

DACW37-02-B-0005

Response Due

March 20, 2002

Point of Contact

POC -- Contract Specialist: Suellen Buelow 651-290-5418, Contracting Officer: Fred Mitchell 651-290-5763

E-Mail Address

frederick.j.mitchell@mvp02.usace.army.mil (suellen.w.buelow@mvp02.usace.army.mil)

Description

LOCK AND DAM 6, FIXED CREST SPILLWAY REHABILITATION, TREMPEALEAU, WISCONSIN. Work generally consists of, but is not limited to, providing all plant, labor, equipment and materials necessary to complete the rehabilitation of the spillway at Lock and Dam 6. Work involves providing erosion protection above and below the water line, consisting of excavation, placement of bedding and riprap around the concrete spillway abutment walls and on approximately 370-meters of Corps of Engineers earth embankment; repairing approximately 900 square meters of deteriorated concrete spillway surfaces, consisting of concrete saw cutting, concrete removal, installation of concrete anchor bolts and rebars, and placement of concrete. This work will require dewatering of the upstream face of the concrete spillway; removal and replacement of all the concrete baffle blocks; construct monolith joints consisting of preformed joint filler and sealant; raise the existing concrete spillway abutment walls by the placement of cast-in-place concrete anchored to the existing concrete with rebars grouted in drilled holes; investigate and fill voids beneath the concrete spillway by drilling holes through the concrete, determining the extent of voids, and filling the voids with sand and grout. THIS PROCUREMENT IS ISSUED UNRESTRICTED UNDER THE SMALL BUSINESS COMPETITIVE DEMONSTRATION PROGRAM (PUBLIC LAW 100-656). NORTH AMERICAN INDUSTRY CLASSIFICATION SYSTEM (NAICS) CODE IS 234990; SMALL BUSINESS SIZE STANDARD IS $27.5 MILLION AVERAGE ANNUAL GROSS REVENUE OF THE CONCERN TAKEN FOR THE LAST THREE FISCAL YEARS. The estimated magnitude of construction in terms of physical characteristics and estimated price is $1million and $5 million. In the event the apparent low bid amount exceeds $1 million, and the firm recommended for award is a large business, it will be necessary for that firm to submit a subcontracting plan, which will be subject to approval, prior to award. For the purposes of formulating the subcontracting plan, in the event it is necessary, the following non-legal binding goals applicable to all subcontracting utilized in the performance of the contract are provided for informational purposes only: Small Business 61.4%, Small Disadvantaged Business 9.1%, Women-Owned Small Business 5.0%, HUBZone Small Business Maximum Percent (%) Practicable, Veteran-Owned Small Business 3.0%, and Subcontract Reporting (SF 294 & SF 295) 100%. Plans and specifications are available as of 15 Feb 02, with bid opening 20 Mar 02. Plans and specifications are available only by CD-ROM. The CD-ROM will be ordered by registering via the St. Paul District web site at www.mvp.usace.army.mil (click on "Doing Business With Us Contracting/Bidders Info" then under Quick Links "St. Paul Electronic Bid Solicitations (EBS)"). An unofficial version of the solicitation will be posted on the District's website. HOWEVER, ANY FORTHCOMING AMENDMENTS WILL ONLY BE AVAILABLE ON THIS WEBSITE. E-MAIL NOTIFICATION WILL BE SENT UPON ISSUANCE OF ANY AMENDMENTS TO ALL REGISTERED FIRMS. SINCE E-MAIL EMSSAGE NOTIFICATIONS MAY NOT BE RELIABLE BASED ON SYSTEM CONSTRAINTS, IT IS RECOMMENDED THAT EACH REGISTERED FIRM CHECK THIS WEBSITE PERIODICALLY FOR UPDATES. A PAPER HARD COPY OF EACH AMENDMENT WILL NOT BE MAILED. Telephone requests will not be accepted.

Web Link

"Doing Business With Us Contracting/Bidders Info" then (http://www.mvp.usace.army.mil)

Record

Loren Data Corp. 20011226/YSOL006.HTM (W-355 SN5158I4)