Naval Research Laboratory, Attn: Code 3420, 4555 Overlook Ave. SW, Washington, DC 20375

66 -- PRECISION SURFACE PROFILER SOL N00173-00-Q-0112 POC Darlene Copp, Contracting Officer, 202-767-2374 WEB: Click here to obtain a copy of the RFQ, http://heron.nrl.navy.mil/supply/Simplified_Acq_Frame%20.htm. E-MAIL: Click here to contact the contracting officer via, SolQnA@labmis.nrl.navy.mil. Naval Research Laboratory has a requirement for the following items: 1 each Manual precision x-y-z stage with at least 150mm x 80mm y and 360 degree theta, At least 6.2" diameter theta table with isolation hood, Maximum scan of at least 10mm, Bi-directional moving stylus, Adjustable stylus force between 1-100mg, Variable scan speed selectable from at least 2 micro/sec to 200 micro/sec., Sampling rate 50-200/sec vertical range resolution of 1 angstrom for up to a height of at least 5 micron and a resolution of 25 angstrom or less in the 300 micron step height. Manual precision stage x-y-z also must have Step height accuracy of at least 10 angstrom (repeatability), Automated PC controlled with database import/export capability and printer support, Measurement control with repeat and average mode auto and software assist leveling Part No. 250287 or Equal; 1 each High power optics 193x to 566x magnification (Factory installed only -- replaces standard 88x to 247x magnification on new orders) Part No. 085510 or Equal. 1 each Accessory Tool Kit with maintenance/stylus insertion Part No. 083569 or Equal; 1 each Stylus, 5um radius, 60 degree Part No. 014621 or Equal; 1 each Stylus, 2um radius, 60 degree Part No. 014648; and 1 each Stylus, .3-.8um 85 Part No. 217190 or Equal. "See Note(s)1" Response date will be determined at the time the RFQ is issued. The RFQ will not be issued until the 16th day after this notice appears in the CBD. Posted 07/14/00 (W-SN475117). (0196)

Loren Data Corp. http://www.ld.com (SYN# 0355 20000718\66-0009.SOL)

| 66 - Instruments and Laboratory Equipment Index  |  Issue Index |