|
COMMERCE BUSINESS DAILY ISSUE OF JULY 10,1998 PSA#2134Dept of Justice, Fed Prison Industries, 320 1st Street NW -- Material
Mgt Branch, Washington, DC 20534-0001 35 -- EXTRUSION EQUIPMENT SOL 1PI-R-1097-98 DUE 071798 POC Lisabeth L.
Day, Contracting Officer (202) 305-7304 or FAX (202) 305-7363 E-MAIL:
Modification to previous CBD/Synopsis, LDay@central.unicor.gov. The
combined CBD synopsis for 1PI-R-1097-98, is hereby amended in response
to several issues raised by interested parties as follows: Extrusion
center line height should be 42 to 45 inches in height; voltage supply
is 460V/3 phase/60 Hz; Extrusion direction, from the operator's view
of machine, shall be left to right; Standard size extrusion pullers
should be 6X39; Sample pieces for profile are available upon request;
The equipment must be diverse to produce living hinge profile as well
as other parts. The only difference should be the die; The offerors
shall identify and include, in their proposal, all equipment required
to operate the extrusion line, which will include such items as
material hopper loader and portable chiller. Equipment shall be self
contained. The Government shall provide cooling tower; Mounting pad
shall be optional. Include only if required by equipment; The living
hinge is a single material extrusion and should not require an
additional extruder. Rigging and setup are still required. Electrical
hook-up can be completed by Government. Correction on line item 0001:
Extruders shall be 3 inch in diameter instead of 2.5 inch. Federal
Acquisition Circular 97-05 will replace 97-04 in the solicitation
document and incorporated clauses and provisions. Closing date shall be
extended through Friday, 07/17/98 at 1:30 PM E.S.T. All other terms and
condition of synopsis remain unchanged. Posted 07/08/98. (0189) Loren Data Corp. http://www.ld.com (SYN# 0330 19980710\35-0001.SOL)
35 - Service and Trade Equipment Index Page
|
|