|
COMMERCE BUSINESS DAILY ISSUE OF FEBRUARY 2,1998 PSA#2023Naval Research Laboratory, 4555 Overlook Ave. S.W. WASHINGTON,D.C.
20375 99 -- MACHINING ENDS OF 20" OD PIPE SOL N00173-98-Q-0019 POC Darlene
Copp, Purchasing Agent, (202) 767-2374 Fax (202) 404-8158. Naval
Research Laboratory has a requirement for the Machining of the first
six inches of the outside diameter of each end of pipe to A125 finish.
Pipe must be put on a lathe and turned. Outside diameter tolerances
are +1/32". NPOI will provide the pipe, which is 20" outside diameter
galvanized steel welded pipe. It is 3/16" wall. The lenghts of the pipe
are as follows: 78 @ 23 ft., 24 @ 22 ft., 1 @ 13 ft. 7in., 1 @ 11 ft.
7in., 1 @ 9 ft. 7in., 1 @ 7 ft. 7in., 1 @ 5 ft. 7in., and 1 @ 3 ft.
7in. Tolerance on lengths is +/-0.125" Price must include shipping from
machine shop to NPOI site in Flagstaff, AZ. NPOI will ship pipe to
shop. Total weight of pipe is approximately 95,000 lbs, not including
packaging. Machined ends must be packaged to protect them during
shipping and handling. Oral request for RFQ package will not be
accepted. See Numbered Note(s): 1. (0029) Loren Data Corp. http://www.ld.com (SYN# 0445 19980202\99-0005.SOL)
99 - Miscellaneous Index Page
|
|