Army Research Laboratory, ALC Procurement Division, ATTN: AMSRL-CS- AL-PC, 2800 Powder Mill Road, Adelphi, Maryland 20783-1197

66 -- ONE MILLION POUND COMPRESSION LOAD FRAME SOL DAAL01-96-R-9496 DUE 012797 POC Patricia States, Contract Specialist, (301) 394-4348, Carolyn S. Gonser, Contracting Officer, (301) 394-1604. This requirement is for the contractor to provide and install a One Million Pound Compression Load Frame with tension and cyclic capabilities. The load frame shall require a crosshead mounted actuator height adjustment capability through hydraulics. The actuator shall have a 10 inch stroke and capable of velocities up to 12 inches per minute using a minimum 20 GPM hydraulic power supply. The contractor shall be responsible for interfacing with the existing MTS hydraulic power supply units. The load frame shall not weigh more than 41,800 pounds. The load frame also shall not require a pit for installation. The load frame shall accomodate a 6'x 6' isolation pad. The height of the load frame shall not exceed 16 feet. The acceptable frame stiffness must be a minimum of 50,000,000 lb/in. The power requirement of the system shall be a standard 120 volt, 20 amp, three-prong outlet. Other load frame requirements shall consist of 30" diameter compression platens and hinged front and back safety shield. The control system shall be provided with stand alone and computer control capabilities. This requirement also includes documentation, training and a warranty in connection with the load frame. A draft copy of the Statement of Work for this requirement is available for review and comment prior to the release of the solicitation. All responsible sources may submit a bid or proposal which will be considered by the Agency. No telephone requests will be honored. (0340)

Loren Data Corp. http://www.ld.com (SYN# 0241 19961209\66-0009.SOL)