Loren Data's SAM Daily™

SAMDAILY.US - ISSUE OF JUNE 22, 2025 SAM #8609
SOURCES SOUGHT

65 -- Sterile Processing Equipment-Tulsa 623

Notice Date

6/20/2025 1:00:38 PM
 

Notice Type

Sources Sought
 

NAICS

339113 — Surgical Appliance and Supplies Manufacturing
 

Contracting Office

RPO WEST (36C24W) MCCLELLAN CA 95652 USA
 

ZIP Code

95652
 

Solicitation Number

36C24W25Q0236
 

Response Due

7/7/2025 12:00:00 PM
 

Archive Date

07/21/2025
 

Point of Contact

Martin Torres, Contract Specialist, Phone: 972-708-0825
 

E-Mail Address

martin.torres@va.gov
(martin.torres@va.gov)
 

Awardee

null
 

Description

Page 7 of 17 Page 1 of The Department of Veterans Affairs (VA), is seeking sources for the following procurement: THIS IS A SOURCES SOUGHT NOTICE ONLY. This is not a solicitation. The purpose of this Sources Sought Notice is to obtain information regarding the item availability and capability of all qualified sources to perform a potential requirement in the future. � The responses received from interested sources will assist the Government in determining the appropriate acquisition method. The Government reserves the right to use information provided by respondents for any purpose deemed necessary and legally appropriate. All information received in response to this notice will be treated as proprietary and will not be shared with other interested parties. Respondents are solely responsible for all expenses associated with responding to this Sources Sought Notice. Responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. This Sources Sought Notice does not obligate the Government to award a contract. PSC Code: 6515 NAICS Code: 339113 The Department of Veterans Affairs, RPOW Activations Division, is conducting market research to identify potential sources which can provide the following: Contractor must provide Brand Name or Equal to the products listed below: 1 Each PTWMENDO1200 Window, Sliding Service A sliding glass transaction window without a screen. Used as a pass thru between two spaces. It has a single operable window and one fixed. The sliding window remains in position where left. The window can open vertically or horizontal and typically is made of aluminum or stainless steel with tempered or laminated glass. Features: Manual Pass-Through Window W=28"" The manual pass-through window assembly includes one 25"" stainless steel set down counter for one side of the window. Pass through windows are designed for standard 5 walls. 4 Each PREP55 AMSCO Prep and Pack Table Deluxe Electric Rack / utility station. The station consists of a stainless-steel countertop, 4-1/2"" apron, legs and necessary cross-member supports. The stations are specially designed to handle loading racks or trays for use with a specific manufacturer's related equipment and accessories but may also serve a variety of general uses, such as an accumulating, sorting, inspecting, or processing station. Various station widths/lengths (25"" to 126"", depending upon manufacturer) are available. Pricing based on 48' width/length. Features: Prep & Pack Table allows SPD staff to focus on the task at hand with a customizable design and innovative features: Electric height adjustment Push-button adjustment allows the table to fit the height of each staff member. Increased visibility through LED task lighting, allowing you to focus on the task at hand. Stainless steel construction with lockable casters Premium construction provides a durable, easy-to-clean table. Specifications: Prep & Pack Table: 72 x 40 x 69-1/2 to 85-1/2"" (variable height) Electric bases are each equipped with a 120 Volt, 50/60 Hz., 3.0/2.2 Amp motor, a height control box with rocker switch and 8-1/2"" (216 mm) power cord. Travel range on electric base is 1/2"" per second. Plug Strip: Provides single circuit, 15 Amp, 120 Volt outlets. Six simplex outlets on each 36"" (914 mm) plug strip. Each strip includes a lighted on/off switch with circuit breaker protection surrounded by a built-in safety guard and an 8' (2 m) power cord. Light: Two T8 lamps, 120 Volt, with batwing lens, and a 9' (3 m) cord with rear right-hand exit. 3 Each DRY-1001 Endodry Advantage Plus AER Single Side Entry A flexible endoscope drying and storage cabinet (Single Door). Features: The Drying and Storage Cabinet continuously forces HEPA filtered air through all endoscope channels, ensuring the endoscope is dry and fluid-free. Continuous ventilation eliminates residual moisture that can lead to bacteria growth. Circulation of dry, instrument-grade, filtered air through each endoscope channel and around the outer sheath ensures the endoscope is dry prior to use. Short drying cycle improves scope turnaround time. Storage time up to 31 days Cassette system eliminates free swinging of the distal tip and protects the endoscope during transport and storage. Transporting flexible endoscopes in cassettes reduces endoscope damage and related repairs by 25-30% Quick, efficient transfer from automated endoscope reprocessor to storage cabinet via cassette system The Drying and Storage Cabinet uses a cassette to minimize touching and potential recontamination. Reduced worker handling minimizes endoscope recontamination and optimizes infection control. No disconnection and reconnection of endoscope channels to hook-up ensures proper connectivity and time savings. SMART Light (green, blue, red) for quick cabinet status identification Space-conscious design available in various configurations to meet the requirements of any facility. Available in single-sided or pass-through models (front and back door) for separation of wet and dry areas Compatible with ADVANTAGE PLUS and ADVANTAGE PLUS Pass-Thru Reprocessor or DSD Reprocessor hook-ups to increase department efficiencies. Continuous data monitoring provides detailed information on the drying status of all endoscopes. Constant air circulation controls temperature and humidity within the cabinet Barcode scanner for ease of endoscope ID and endoscope tray location; touchscreen for quick visualization. SMART Connect data interface with ADVANTAGE PLUS or ADVANTAGE PLUS Pass-Thru Reprocessor and CANEXIS Integrated Workflow Solution Tracking System Specifications: Electrical Requirements 120 VAC, 60HZ, Power Input: 75W, Fuse: T2A (internal device) 15A (circuit), 6 Ft Power Cord Interface RJ45 (10/100 Mbit) Air Requirements (Size: 1/4 in, Pressure: 58-145 psi Dynamic, 4.2 SCFM) Instrument grade air Dimensions: Single door 75 H x 24 W x 22 D (inches) Door Swings 20.5 inches Include: 1 Each 78400931, Assy Hookup Rack, Short 2 Each ML020117, Rapicide Pa, Assembly 2/Ca 1 Each 784009748, Spill Kit Rap Pa 2 Each IWPCF Innowave PCF Sonic Irrigator Thermal Disinfection and Robotic Program A free-standing, cabinet mounted, single stainless-steel chamber (minimum size 10X24X12), ultrasonic cleaner. The cleaning unit includes the following minimum features: power lid, automatic detergent injector, automatic level controls, automatic timer, and switch fill and drain controls. Sonic cleaning energy provided to the chamber by transducers which are powered by a solid-state generator(s) at a frequency of 40 kHz. Designed for use in surgery reprocessing areas, central processing departments and laboratories to clean surgical instruments and other hardware with sonic energy. Features: Sonic Irrigator is an ultrasonic cleaner designed to increase workflow and help you keep pace with busy ORs. Through a proven, systematic cleaning process, the InnoWave PCF Sonic Irrigator allows you to reprocess more within a smaller footprint. Irrigator delivers optimal cleaning from a proven, systematic process: Sonic activity targets and removes exterior soils from small crevices and irregular surfaces Sonic irrigation pushes a sonically charged jet of chemistry which dislodges and flushes soils from intricate internal channels The high-impingement deluge wash prevents the redepositing of blood and other soils Six integrated spray nozzles help to reduce the risk of redepositing blood or other soils Quick recognition of cycle progress from the touch screen control Baskets click into the tank for a secured connection to irrigation ports for maximum irrigation pressure Compatible with most common surgical instrument trays used in hospitals and medical facilities Irrigator provides assurance and safety through Thermal Disinfection. Integrated record keeping and easy export via the standard USB port captures key cycle parameters, reducing audit-related stress for your Sterile Processing Department. # of Lumen Connections - 20 Weight per Load - 44 Thermal Disinfection - Yes 1 Each ADVPT3007 Advantage Plus Pass-Thru A low temperature sterile processing system for sterilizing immersible surgical and diagnostic scopes, cameras, instruments and accessories. The unit shall provide a digital display of cycle data and shall record and print a permanent record of cycles. Units are available in floor, countertop or cart models. Features: Pass-Thru Automated Endoscope Reprocessor is a pass-thru platform to physically separate the areas of flexible endoscope reprocessing rooms. Pass-Thru Automated Endoscope Reprocessor uses the non-enzymatic INTERCEPT PLUS Detergent in the wash cycle before disinfection to effectively loosen soils in three minutes at 68-95°F (20-35°C). During the automated cycle, the system also uses the single-use, non-aldehyde RAPICIDE PA High-Level Disinfectant to effectively kill TB, hepatitis viruses, C-diff, VRE, MRSA and CRE in five minutes at 86°F (30°C). Convenient transport cassette reduces handling and helps prevent endoscope damage and recontamination. Hands-free operation and automatic cycle start. Continuous leak testing during cycle, the system high-level disinfects leaky or damaged endoscopes prior to servicing. Ergonomic design and large easy- loading basins support operator comfort. Remote diagnostics enable fast and efficient technical support and servicing, maximizing reprocessor availability. Large visual display of real-time cycle information. Barcode scanner for fast and accurate data entry (e.g., endoscope, operator, patient, and physician IDs) to facilitate cycle management and endoscope traceability. Computerized cycle documentation and reporting. The Pass-Thru integrates with the SPM® Surgical Asset Tracking Software and other tracking software solutions for active monitoring and process verification. Specifications: Dimensions: 78.75 inches /2000mm (h) x 51.8 inches /1316mm (w) x 31.25 inches / 792mm (d) Power Requirements: 120 VAC ± 10%, single phase, 60 Hz, 1200 watts per unit. Facility must supply a GFI protected NEMA 5-15R outlet. Water Supply: The incoming waterline must be a minimum of 1/2 (13 mm) ID providing a minimum flow rate of 2.6 GPM (10 l/min) (per machine) and a DYNAMIC water pressure between 40 to 87 PSI (3 to 6 bar) at the gauge before the Bypass Valve. The water supply must be able to provide an on-demand water temperature of 95°F ± 4°F (35°C ± 2ºC). Ensure water hardness is less than 200 ppm CaCO3 (200 mg/L CaCO3) for optimal performance. Potable water is the minimum standard; RO water is preferred, but not required. Drain: The drain must be in the floor in the location indicated in the installation diagram. The drain system must accommodate draining of 10.5 gal/min (40 l/min). Facility must supply a flush floor drain with a minimum diameter of 4 (100 mm) Air Supply: Facility must supply a 1/4 (6 mm) NPT female connection with a shutoff valve and pressure gauge located in the wall behind an access panel. The facility supplied compressed air must meet these requirements: 58 to 145 psi (4 to 10 bar) The maximum demand of compressed air is 1.1 scfm (32 l/min ANR) Filtered to 5 microns The maximum dew point is 45°F (7°C). The maximum oil concentration is 5 mg/m3. Ventilation: It is a health and safety requirement to have a minimum of 10 air changes per hour in the room. Facility must supply a 4 (100 mm) round duct connection located in the wall behind an access panel. A minimum of 25 cfm (12 l/s) at 0.25 inches (6 mm)-water (62 PA) static pressure is required to properly vent the unit. Network: Facility is required to supply an RJ45 network connection receptacle located in the wall behind an access panel. The Pass-Thru Endoscope Reprocessing System is equipped with a PC running Windows which will allow full networking along with the capability of remote diagnostics. Include: 8 Each CAS1000, Model Cas-1000 Assy, Cassette Transport 1 Each 67199157, Barcode, Adv 100-199, Adhesive Barcode Tags 1 Each 78401509, Kit 10ln 1Micron Filter 1 Each 78401498, Trim Kit, 1X, 140-180Mm,Fw 1 Each 4002404, Model MI02-0145 Intercept Plus, 2X5 2/Ca 2 Each AMSCO 53 Reprocessing Sink 106 Triple Bay w/ Dosing Stations Three sink cleanup counter. Unit is constructed of type 304 corrosion resistant stainless steel. It consists of three sinks 14""W X 16""H X 10""D, hot and cold-water faucet, and pre-rinse spray hose. Equipped with channel reinforced drainboards, and backsplash, and supported by tubular stainless-steel legs. Unit is designed for use in control sterile supply decontamination areas. Features: The sink is ergonomic as it offers a height adjustable counter and magnetic backsplash for accessories that help streamline workflow. Includes: 30 bays, air & water pistols with the various tip attachments plus magnetic holders, 2 pre-rinse & faucet combos, treated water faucet, external drain lever handles and etched gallon markers in bay to ensure proper water to chemistry ratios. 5 Each AMSCO 600 Loading Car with 3 Shelves and Transfer Carriage, Fixed Height (63in), AY1596604-AY1598104 Loading car and transfer carriage for use with sterilizers. Loading car is a welded, CRS framework with two full-length adjustable shelves of CRS welded sheet metal and wire. Transfer carriage is constructed of a welded CRS or painted for corrosion protection frame and provided two fixed and two swivel casters. Loading car is secured to the transfer carriage by a locking mechanism. For loading and unloading 24x36x48 sterilizers and for transferring goods to and from processing areas. Features: Loading cars in four sizes for compatibility with 39"", 51"" and 63"" chamber lengths. Each loading car includes welded stainless-steel frame with adjustable shelves to accommodate numerous load sizes and configurations. Wheels are constructed of stainless steel. Loading car wheels align with, and travel on, bottom rails in sterilizer chamber. Loading car equipped with one adjustable upper shelf. Bottom shelf height is fixed; other shelves are adjustable. Loading car extraction hook - Extends operator reach for easier removal of loading cars. The telescopic hook is adjustable from 47 to 71"" (1041 to 1803 mm). Weight: 4.2 LBS (1.9 KG Transfer carriage is provided in two configurations, both featuring welded tubular steel frames provided with a push bar handle. The carriages are supported by four swivel casters with non-marking, easy-rolling tires. All casters are capable of directional locking; additionally, rear casters are equipped with foot-operated brakes. A guide assembly helps align carriage with loading car rails in chamber bottom. Fixed-height carriage Set at a fixed height of 31.5"" 2 Each AMSCO 7053HP Steam Heated Washer/Disinfector A recessed mounted (through one wall), single door (vertical sliding with tempered glass window), multi-level, mechanical, washer/disinfector, minimum chamber size 26X24X24, utilizing facility supplied steam. The unit is controlled by a microcomputer that monitors and controls all unit operations and functions and provides both audible and visual indications of deviations. A printer-recorder documents and records each cycle performance. Processing cycles are pre- programmed with pre-wash, wash/cleaning, rinse, and thermal rinse/disinfection. For use in health care facilities and laboratories where reusable items (instruments, utensils, anesthesia/respiratory goods, and glassware) are handled for decontamination purposes. This unit is not a substitute for terminal sterilization. Unit available with manual or power door, various electrical configurations, options, and accessories. Price based upon power door, 208V, 3- phase, with various options. (RF: Should be 2-Door. ROM cost is 2-Door) Features: Washer/Disinfector with touch screen control is intended for use in the cleaning and intermediate-level disinfection of soiled reusable simple hard-surfaced rigid surgical instruments (such as forceps and clamps), utensils (such as bedpans and urinals, trays, bowl, basin, kidney dishes), rubber and plastic goods, theatre shoes and other similar and related articles found in healthcare facilities. Single-Chamber Washer/Disinfector is a cabinet-type mechanical washer that includes: Color touch screen control system and visual progress indicator Audible warning system with adjustable volume Space saving, power vertical sliding door Eight factory-loaded (Instruments, Orthopedic Instruments, Utensils, Plastic Goods, Rigid M.I.S., Anesthesia / Respiratory Goods, Gentle and Decontamination) and up to 20 Custom cycles. Each cycle is effective, fast, energy efficient and may be customized (within allowed range of parameters) to meet specific operating requirements LED status indicator lighting Compact space saving footprint Conforms to seismic building code requirements Patented spray arm system providing entire chamber coverage 180 degree reverse installable Quickly processes up to 300 DIN trays/8-hour day Provides optimal cleaning with complete rack coverage Uses as low as 31 gal. water/cycle Washer/disinfector with a validated cycle for select da Vinci EndoWrist Surgical Instruments. he RAS (Robotic Assisted Surgery) Cycle, RAS 12 Racks, and Prolystica Ultra Concentrate HP Enzymatic and Neutral Chemistries are specifically designed to automate the cleaning and disinfection process for da Vinci devices delivering optimal results and saving you time. Instrument Cycle Time - 24 Minutes DIN Trays/Cycle - 15 DIN Trays per 8-Hour Shift - 300 Trays Gallons per Cycle - 31 Gallons Spray-Arm Cleaning - Pin-less, tool-less design with innovative shape to prevent clogging Specifications: Washer Dimensions - 42 x 80-3/4 x 38"" Chamber dimensions - 26-1/2 x 26-1/4 x 31-1/2"" Load Height - 31"" from the floor Include: 2 Each Steris Dosing System 3 Pumps 1 Each Prolystica Steel Rail with (3) Chemical Containers 1 Each Vision 1321 Cart and Utensil Washer Disinfector A recessed (through two walls), pit mounted, double door (right or left-hinged, appropriate configuration to be indicated on equipment elevation drawings), cart and utensil washer (minimum chamber load capacity 78X34X76). A microprocessor-based controller monitors and controls system operations and functions. The unit provides: visual and/or audible indication of cycle operation, programmable treatment time and temperatures, and a minimum of three cycles (wash with detergent, rinse, and drying). For use in central processing to clean and decontaminate, carts, patient-care utensils (IV poles, wheelchairs, stretchers, etc.) and other bulk items. Various electrical configurations are available, for pricing 208V, 60HZ, 3-phase is used. Features: Cart Washer / Disinfector offers the unique HexaClean spray pattern technology, which ensures complete cleaning coverage in a 10-minute cycle time, making it the most productive cart washer/disinfector available. Large capacity of the cart washers with two automatic sliding doors allows you to maximize throughput in your sterile processing department and process up to 192 carts in an 8-hour day. Automated injection of descaling chemistry allows you to select the decontamination cycle and begin this routine maintenance task. An additional instrument cycle option can be installed at the factory to allow the reprocessing of critical devices. It s also designed to be Green, which means it uses minimal water (50 gallons per fill cycle), recycles 70% of water per cycle and is energy efficient. It includes a simple PC touchscreen control, a convenient USB port to download cycle records, and automatic full glass sliding doors. It comes standard with vented drying, chemical dosing system, automatic floor tilt, drain discharge cool down. This model is configured with 3 chemistry pumps and a chamber depth of approx. 2100mm/83 inches. Additional features of the Cart Washer: Control panel with single-touch buttons for cycle selection Record-keeping capabilities with USB port and cycle printer on the clean side Cycle phase and time is visible across the room 8 pre-programmed cycles, plus customizable cycles Access to mechanical core allows maximum uptime Overall Dimensions - 120 x 112.75 x 106"" Effective Chamber Capacity - 40 x 80 x 82 H Include: 1 Each Steris Dosing System 5 Pumps 1 Each Prolystica Steel Rail with (5) Chemical Containers 1 Each AMSCO Rack Return System Rack Return System A pass-thru window assembly with magnetic or manual interlocking doors for moving decontaminated products between the decontamination area and the sterilization processing area. The pass-thru window is tempered safety glass, and the housing is made of welded stainless steel. Unit is mounted in a building wall or in a modular wall. Door interlocks allow only one door to be open at a time. The AMSCO Rack return fits into a standard rough opening, through 2-8 thick walls, without any special modifications and is compatible with any type of building wall: masonry, drywall, and modular walls. Interlocked two door system helps maintain compliance with ANSI/ASHRAE/ASHE Standard 170-2017, Ventilation of Health Care Facilities by maintaining negative airflow on the soiled side and positive pressure on the clean side Obstruction sensor automatically opens the door when an obstruction is present Accommodates both standard and long chamber racks and is compatible with universal and hinge style transfer carts Chamber status lights* indicate when the rack return is ready for use, unloading or if an alarm occurs Communication system* promotes teamwork allowing staff to talk between sides while not compromising airflow Overall Dimensions 883W x 2362H x 1008L mm (34 3/4W x 93H x 39 11/16 L) Interior Chamber Dimensions 689W x 726H x 841L mm (27 1/8W x 28 9/16H x 33 1/8 L) Door Dimensions 689W x 726H mm ( 27 1/8W x 28 9/16 H) Utility Requirements Air: 1/8 NPT Electric (US): 100 120 V, 60Hz, 4 Amps Electric (EU): 220 240 V, 50Hz, 3 Amps 2 Each AMSCO 600 Steam Sterilizer A recessed mounted (through two walls), double door (right or left-hinged, appropriate door configuration to be indicated on equipment elevation drawings), vacuum, sterilizer utilizing a remote electric steam generator. The unit is controlled by a microcomputer that monitors and controls all unit operations and functions and provides both audible and visual indications of deviations. A printer-recorder documents and records each cycle performance. For general purpose pre-vacuum or gravity steam sterilization of hospital and laboratory supplies at temperatures in the range from 110°C to 135°C (230°F to 275°F). A liquid cycle is also provided at temperatures in the range from 100°C to 121°C (212°F to 250°F). NOTE: For the electric steam generator, refer to JSN: S1830. Doors may be power operated. Features: High capacity, fully jacketed, 316L stainless steel chamber validated for processing up to (15) 25lb instrument trays (375lbs) Durable rigid chamber insulation cover Vertical sliding door with pneumatic drive Steam activated gasket with 2-year warranty Clean steam-ready with stainless steel piping for steam delivery Durable, low maintenance pneumatic valves and 2-stage vacuum pump Secure, proprietary microprocessor control 8.4 high resolution touch screen display Thermal printer with easy load, long life paper USB port for data download 26.5"" x 26.5"" x 63"" Recessed, 2 - Wall External Supplied Steam 5 Each 103466 Cleanascope Advantage 6 Tray Cart A cart designed specifically for the safe transport of endoscopy scopes. The cart will have a lightweight frame of a tubular welded construction. The sides and back panels will be of a foamed resin with a work top of seamless, raised edge plastic. The cart will have rectangle or round trays with lids and will have 4 casters with 2 locking. Cart may have a roll-top door with a key lock. Features: Transport and short-term storage system helps to protect your endoscopes by minimizing direct handling and reducing contact with airborne contaminants. Creates a protective environment for each disinfected endoscope. Green (clean) and red (contaminated) color-coded liners immediately identify clean versus contaminated scopes. 6 Tray - Robust reusable tray accommodates large endoscopes. Trays fit into the contoured cart top, creating an ideal work surface. Hard lids REQUIRED for added protection when transporting outside department. Large locking caster wheels for transportation. 1 Each SBP1000 Model SBP-1000, Scope Buddy Plus Endoscope Flushing Aid. Hands free channel flushing. User selectable flushing times. Audible and visual alert signal for cycle completion. Features: Endoscope flushing aid creates a consistent and reliable means to flush endoscope channels. The endoscope cleaning and flushing system provides enhanced data monitoring and features automated detergent dosing and disposable tubing sets to support cleaning consistency. Compatible with all flexible endoscopes. Counter or Wall Mount. 24-hour disposable tubing ensures new, clean tubing is used at the start of each day Continuously monitor the endoscope manual flushing process with the Track and Trace features Validated 1:35 default flushing time to meet worst case flushing times for OLYMPUS®, PENTAX® and FUJIFILM endoscopes Automatic and Manual Modes provide easy to use steps for a dependable flushing process Compatible with most current endoscopes Simultaneously flushes multiple endoscope channels Consistent, hands-free flushing replaces repetitive and labor-intensive syringing of channels Unit Dimensions: 10.3 H x 7.5 W x 11.5 D (inches) Electrical Requirements: 100 240 V, 50/60 Hz 2 Each VP50002101 V-PRO max 2 Sterilizer 208-230V, 60Hz Cab SD EN Vaporized Hydrogen Peroxide Sterilizer compatible with da Vinci Si and da Vince Xi scopes. 16 minute, Fast Non-Lumen Cycle gives you a terminal sterilization solution to immediate use. Also includes Lumen, Non-Lumen, and Flexible Cycles. Simplified documentation minimizes errors and works with tracking systems. Enhanced interface is intuitive for new users, with helpful reminders to support your workflow. Moisture Check is built into every cycle to aid in detecting residual moisture in loads. Elegantly simple, hands-free chamber access provides easy loading, while still allowing for manual access with the chamber handle. Chamber Volume: 4.8 ft3 Cycle Time (mins) Fast Non Lumen: 16 Non Lumen: 28 Lumen: 52 Flexible: 35 Moisture Check: Automatically included in cycle time Fast BI: 5 minutes Cycles per Sterilant Container: 15 Cycles (or 30 for Fast Non Lumen Cycle) H2O2 Concentration: 59% Plasma: No Compatible Materials: Over 45 Laparoscopy Trays per Shift: 68 Connect to Tracking Systems: Yes Cleared Claims for 3D Printed Items: Yes 2 Each VP50002101 V-PRO maX 2 Sterilizer 208-230V, 60Hz Cab SD EN Vaporized Hydrogen Peroxide Sterilizer compatible with da Vinci Si and da Vince Xi scopes. 16 minute, Fast Non-Lumen Cycle gives you a terminal sterilization solution to immediate use. Also includes Lumen, Non-Lumen, and Flexible Cycles. Simplified documentation minimizes errors and works with tracking systems. Enhanced interface is intuitive for new users, with helpful reminders to support your workflow. Moisture Check is built into every cycle to aid in detecting residual moisture in loads. Elegantly simple, hands-free chamber access provides easy loading, while still allowing for manual access with the chamber handle. Chamber Volume: 4.8 ft3 Cycle Time (mins) Fast Non Lumen: 16 Non Lumen: 28 Lumen: 52 Flexible: 35 Moisture Check: Automatically included in cycle time Fast BI: 5 minutes Cycles per Sterilant Container: 15 Cycles (or 30 for Fast Non Lumen Cycle) H2O2 Concentration: 59% Plasma: No Compatible Materials: Over 45 Laparoscopy Trays per Shift: 68 Connect to Tracking Systems: Yes Cleared Claims for 3D Printed Items: Yes RESPONSES SHOULD INCLUDE THE FOLLOWING INFORMATION: Business Name Business Address Point of Contact, name, phone number and e-mail address SAM EUID # NAICS Code Business Size Business Type Capability statement Product country of origin GSA/FSS Contract Number if applicable Please respond via email to Martin Torres at martin.torres@va.gov. The response due date for this information is Tuesday, July 8, 2025, at 2:00PM CST.
 

Web Link

SAM.gov Permalink
(https://sam.gov/opp/3d29d552b8ea44a1b310a4dcb47acf47/view)
 

Place of Performance

Address: Tulsa VA Medical Center 440 S. Houston Ave, Tulsa 74127

Zip Code: 74127
 

Record

SN07484373-F 20250622/250620230043 (samdaily.us)
 

Source

SAM.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |