Loren Data's SAM Daily™

SAMDAILY.US - ISSUE OF MAY 01, 2025 SAM #8557
SOURCES SOUGHT

U -- Foreign Affairs Counter Threat Equivalency

Notice Date

4/29/2025 11:55:05 AM
 

Notice Type

Sources Sought
 

NAICS

611699 — All Other Miscellaneous Schools and Instruction
 

Contracting Office

W6QK ACC-ORLANDO ORLANDO FL 32826-3224 USA
 

ZIP Code

32826-3224
 

Solicitation Number

PANORL24P0000001139
 

Response Due

5/30/2025 9:00:00 AM
 

Archive Date

12/31/2025
 

Point of Contact

John M. Ebanks, Phone: 520-714-5625, Caryn H. McGraw, Phone: 5207145532
 

E-Mail Address

john.m.ebanks.civ@army.mil, caryn.h.mcgraw.civ@army.mil
(john.m.ebanks.civ@army.mil, caryn.h.mcgraw.civ@army.mil)
 

Description

SEEKING INDUSTRY CAPABILITIES TO CONDUCT SECURITY ASSISTANCE TRAINING TEAM ORIENTATION COURSE AND POTENTIAL INDUSTRY SOURCES FOR ANTICIPATED COMPETITIVE PROCUREMENT BRIEF SUMMARY OF THE ACQUISITION The United States Army Security Assistance Training Management Organization (USASATMO) is conducting market research to provide instructional Foreign Affairs Counter Threat Equivalency (FACT-E) training services. The service objective of this requirement is to provide commercial support to USASATMO�s execution of FACT-E Training by providing instruction, supporting materials, and facilities to conduct training on multiple survival training subject areas. USASATMO invites interested parties to provide responses in accordance with (IAW) the information that follows. Submissions will be accepted from either prime contractors for the full requirement or vendors who anticipate performing as a subcontractor. Information gained from this source sought will assist USASATMO and The Army Contracting Command-Orlando in developing its acquisition approach. At the time of solicitation, it is anticipated that award will be given to that offeror who offers the best overall value to the Government. BACKGROUND The USASATMO conducts a monthly FACT-E course to prepare military, Department of Defense civilians and contracted personnel for Security Assistance Team missions world-wide. The focus of the training is on Anti- Terrorism/Force Protection and Survival, Evasion, Resistance, and Escape tactics, techniques, and procedures. The current global threat situation requires effective pre-mission training to ensure deployed personnel are fully prepared to protect themselves and function in their Outside-The-Continental-United States environment. Throughout the world, kidnappings and assassinations are increasingly more popular as terrorist preferred method of operation. To meet the ever-changing challenges of the 21st Century on a global scale, USA SATMO addresses the diverse educational, geographic and cultural background requirements through FACT-E training. FACT-E training provides personnel the ability to live and work in any country in the world, including those with unstable governments or infrastructures, or both, and to integrate safely into a culturally diverse environment. A. Requirements. The contractor will be required to provide instruction on multiple subject areas described below. The contractor will not evaluate students but will only be responsible for provide training. The contractor shall have their facility available Wednesday through Friday and must be able to complete all required training IAW with Programs of Instruction (POI) objectives. The contractor must present an hour-by-hour training schedule. The contractor must, always maintain an adequate workforce IAW individual class instructor requirement and ensure that students receive uninterrupted instruction on all tasks defined within this PWS. The contractor shall provide the required facilities and support capable of training up to 30 students and support up to 14 FACT-E courses per year. To avoid training delays, the contractor shall ensure that all training sites are within ten (10) minutes of each other. If training will be performed within multiple training areas, the contractor will be responsible for the transportation of all students. The contractor�s facilities shall have adequate male and female latrines within five (5)-minute walking distance of any training area, a potable water source for students, and a break/lunch area with a refrigerator, microwave, and dining tables for no less than ten students. The range must comply with state and local firearm laws and regulations and must meet AR 385- 63, Range Safety. Place of Performance: The contractor�s training facility/facilities shall be within 50 miles of Security Assistance Training Company (SATCO) located at BLDG A-4148 Collins Street, Fort Bragg, NC 28310. The contractor shall provide both onsite student transportation on the vendor�s facility (if required) and to-and-from daily transportation of students between USASATMO, Fort Bragg and the vendor�s training facility. The contractor will be required to provide instruction on the following subject areas: FACT-E Subject Areas 1. 9mm Familiarization 2. Attack Recognition and Response 3. Tactical Medical Training with Massive hemorrhage, Airway, Respirations, Circulation, and Hypothermia (M.A.R.C.H) 4. Vehicle Dynamics Training 5. Fire as a Weapon Training 6. Culminating Exercise (CULEX) 1. 9mm Familiarization Range: The purpose of this subject area is to familiarize students with fundamentals of pistol marksmanship. The contractor shall instruct students in the techniques and skills required to use a firearm that will allow proper use during a local or global threat event. 1.1. 9mm Familiarization Range Learning Objectives: At the completion of training, each student shall be able to successfully demonstrate the following: 1.1.1. Assembly and disassembly; 1.1.2. Load and unload; 1.1.3. Correct a malfunction; 1.1.4. Magazine change; 1.1.5. Fire from standing and alternate firing positions; and 1.1.6. Demonstrate the ability to engage targets at 3, 7, and 15 yards. 1.2. 9mm Familiarization Range Training Instructor/Personnel Requirements: The contractor shall provide a primary instructor and assistant instructor for classroom portion. For live fire ranges, contractor shall provide adequate number of students to meet the instructor-to-student ratio of no less than one (1) instructor to every four (4) students along with one (1) additional instructor to serve as Range Safety Officer. The contractor shall also have the capability onsite to correct minor weapon malfunctions and stoppages to ensure the safe conduct of live fire. At least one (1) of the Contractor�s Range Personnel shall have the training and equipment to provide onsite emergency first aid/emergency trauma care. 1.3. 9mm Familiarization Training Facility Requirements: The contractor shall provide the following facilities to support training: 1.3.1. Outdoor range with overhead cover over the firing positions or an indoor range in case of inclement weather. 1.3.2. Minimum of 12 marked firing lanes supporting targets at 3, 7, and 15 yards. 1.3.3. Appropriate facilities for the receiving, securing, and issuing the ammunition, weapons, and *explosives required for the conduct of the course. The contractor shall provide and maintain all weapons required for course completion. *Note: The current FACT-E POI does not require the use of explosive pyrotechnic devices. The requirement for the Contractor�s facility to be capable of receiving and storing explosives is to support potential future FACT-E changes. Future changes may require the employment of 12oz 4F Black Powder Charges, 50gr/ft. Detonation Cord, and 8oz Cast Booster (Pentolite or similar). 1.4. 9mm Familiarization Range Equipment, Training Aid and Requirements: The contractor shall provide the following equipment and training aids to support training: 1.4.1. Authorized Protective Eyewear List (APEL) approved eye protection (one (1) for each student) 1.4.2. Ear protection (one (1) for each student) 1.4.3. 9mm ammunition (250 rounds for each student) 1.4.4. Target stand (one (1) for each lane) 1.4.5. Staple gun with staples (as required) 1.4.6. NRA Standard Targets a) B-29 Silhouette (two (2) for each student) b) B-16 or B-33 Slow Fire (two (2) for each student) 1.4.7. No less than 15 9mm Pistols; Glock 17 or P320 M18 are the preferred weapons for training. 1.4.8. Magazines (seven (7) for each student) 1.4.9. Over the belt holster (polymer, kydex, or equivalent) right-handed (one (1) for each weapon) (Must have passive retention) 1.4.10. Over the belt holster (polymer, kydex, or equivalent) left-handed x four (4) (Must have passive retention) 1.4.11. Belt worn dual magazine holder (polymer, kydex, or equivalent) (one (1) for each weapon) 1.4.12. No less than six (6) speed loaders 1.4.13. Sharpie-type marking pen (one (1) per student) 1.4.14. Weapon lubricant (as required) 1.4.15. MARCH emergency trauma care training aids for students to practice when not on the firing line. 2. Attack Recognition / Response Training: This lesson provides key elements to surviving direct and indirect fire at Post. Personnel need to be aware of dynamic trends in attacks, unconventional methods, and target selection that attackers use. Through this presentation and practical exercises (PEs), students can acquire and apply knowledge and skills to support life-saving reactions to attacks. Topics covered include direct and indirect fire attacks, cover versus concealment, responding to attacks, responding to Emergency Notification System alarms and Improvised Explosive Devices (IED). This lesson also familiarizes course participants with general best practice responses to common attack categories through classroom lecture PEs. These attack categories include direct fire, indirect fire, and IED�s. This lesson uses lecture and video examples in a classroom environment followed by a series of PEs to reinforce topics covered in the classroom. 2.1. Attack Recognition / Response Learning Objectives: At the completion of training, each student shall be able to successfully demonstrate the following: 2.1.1. The ability to distinguish between direct and indirect attacks. 2.1.2. The ability to distinguish between cover and concealment. 2.1.3. Respond to direct and indirect fire attacks. 2.1.4. Respond appropriately to Emergency Notification System alarms. 2.1.5. Respond to explosive threats. 2.1.6. Identify effects of improvised explosive devices. 2.1.7. Demonstrate the ability to move unassisted over uneven terrain between positions of cover utilizing the kneeling and prone positions. 2.2. Attack Recognition / Response Instructor Requirements: The contractor shall provide one (1) instructor to perform the role of an active shooter and no less than one additional small group instructor for each group of ten (10) or less students. 2.3. Attack Recognition / Response Training Facility Requirements: The contractor shall provide the following facilities to support training: 2.3.1. Break contact lane in which students can move from at least two (2) positions of cover utilizing the kneeling and prone positions. 2.3.2. Enclosed meeting room with two (2) or more points of entry/exit. 2.4. Attack Recognition / Response, Training Aid and Requirements: The contractor shall provide the following equipment and training aids to support training: 2.4.1. No less than one (1) simulated firearm with non-lethal effects (i.e. Paint Balls or Pneumatic Gun) 2.4.2. Authorized Protective Eyewear List ( approved eye protection (1 per student) 3 Tactical Medical Training This classroom block instructs students in techniques for rendering first aid in the event of an injury to themselves or others. The goal of this training is to give the students the skills to react to a casualty-producing event and provide medical assistance until the arrival of First Responders. Department of State Medical training utilizes the Massive hemorrhage, Airway, Respirations, Circulation, and Hypothermia (M.A.R.C.H.) method for casualty assessment. The contractor will teach this method so that all individuals at all posts will have common medical knowledge in the event of an emergency. The classroom should be large enough to conduct practical in-classroom exercises. Students must leave the course with an Individual First Aid Kit (IFAK). 3.1. Medical � Introduction: This block will introduce students to the M.A.R.C.H. mnemonic. This block will also provide students with information on why survival rates are the highest they have ever been, as well as the differing wounds that may be associated with varying levels of velocity. 3.2. Medical � Massive Hemorrhage: Massive hemorrhaging is a life threat that must be addressed in a timely manner. Students will be exposed to the three (3) types of bleeding, as well as discuss methods for addressing massive hemorrhaging to the extremities of a casualty. Objectives: - Identify the locations on the human body where a tourniquet should be applied - Apply M.A.R.C.H - Apply a tourniquet within 30 seconds - Demonstrate re-assessment techniques following unsuccessful control of massive hemorrhaging - Identify how to use hemostatic agent to control bleeding 3.3. Medical � Airway: The Airway block of instruction will teach students how to open and maintain an airway. Students will be taught how to perform the jaw thrust maneuver as well as the recovery position. Objectives: - Describe normal airway alignment - Identify airway obstructions - Demonstrate techniques to open an airway - Identify causes of progressive respiratory distress 3.4. Medical � Respiration: Students will gain an understanding of what penetrating trauma to the chest does to the body, as well as understand how to treat. Students will be exposed to various occlusive dressings that are currently commercially available, as well as being taught how to create them if needed. Objectives: - Manage respiratory distress 3.5. Medical � Circulation & Splint: Often basic concepts like bandaging are overlooked by first responders, yet they can be critical in the overall survival of their casualty. After this block, students will have a better understanding of bandaging. Students will learn how to secure an impaled object, dress an evisceration, and treat eye injuries during this block. Objectives: - Manage soft tissue injuries - Manage musculoskeletal injuries 3.6. Medical � Hypothermia: Non-traumatic hypothermia results in nearly a 20% fatality rate. When trauma is added to the equation fatality rates increase drastically. Students will gain an understanding on how to identify and manage hypothermia to offer casualties the best chance at surviving their injuries. Objectives: - Identify sources of heat loss in casualties - Describe steps to prevent hypothermia in casualties 3.7. Medical � Vitals and Documentation: Documentation is important and should be performed as time permits. Documenting injuries and vital signs will offer a quick reference point for medical providers to see what treatment, if any, has been given and to provide an overall picture as to the history and status of the casualty(s). Objectives: - Document pertinent medical information 3.8. Tactical Medical Training Instructor Requirements: The contractor shall provide one primary instructor and one assistant instructor for classroom portion of this training. Contractors shall provide one small group instructor per group of six (6) students for PEs 3.9. Tactical Medical Training Facility Requirements: The contractor shall provide one academic classroom suitable for instructing a minimum of six (6) up to 30 students in mass and be equipped with effective instruction with functional student tables, chairs, computer presentation systems, etc. The contractor shall provide a separate training area for small group instruction. The contractor shall provide one (1) area that will facilitate practical exercise for no more than six (6) students per group. 3.10. Tactical Medical Equipment, Training Aid and Requirements: The contractor shall provide the following equipment and training aids IAW student ration requirements. Student ration requirements shall consist of one (1) IFAK per student for training purposes and one IFAK per student as a takeaway IAW State Department accreditation requirements. All equipment must be purchased or on-hand at the training site five (5) days before approved training date. 1. Training IFAK (one (1) per student) which includes: a) One (1) Pair surgical gloves b) Combat Application Tourniquet (CAT) (North American Rescue (NAR) or similar) c) Combat gauze (Kerlix non-surgical - 6ply, 100% cotton, 4.5"" x 4.1 yards gauze or similar) d) Tactical Combat Casualty Care card e) Vented chest seal f) Needle and catheter 3 � � length (10 or 14 gauge) g) Emergency trauma bandage h) 2� medical tape i) Nasal pharyngeal airway j) Surgical lubricant 2. Operational IFAK (one (1) per student) (Modification P00001): which includes: a) IFAK Pouch b) Nasal Airway Lubricant c) Gloves d) Packing Gauze x 2 e) Permanent Marker f) 2� medical tape g) Casualty Documentation Card h) Nasal Airway i) Pressure Dressing j) Combat Application Tourniquet (CAT) k) Chest Seal l) Hemostatic Packing Gauze m) Hypothermia Blanket n) Contents Card 3. Hemorrhage Control Training Kit (North American Rescue (NAR) or similar) that facilitates junctional wound packing (one (1) for every six (6) students) 4. Cravats (one (1) for every four (4) students) 5. Trauma shears (one (1) for every four (4) students) 6. Heavy Duty Carabiner to be used with improvised tourniquet (one (1) for every six (6) students); 7. Airway Mannequin that facilitates practical exercise of the following (one (1) for every six (6) students) with: a) Oropharyngeal and nasopharyngeal airway insertion b) Manually generated carotid pulse c) Tension pneumothorax (mid clavicular and mid-axillary 8. Survival thermal blanket (one (1) for every four (4) students) 9. Special Operations Forces Tactical Tourniquet (one (1) for every four (4) students) 4 Vehicle Dynamics Learning Objectives: Students begin with vehicle dynamic exercises that are designed to enhance car control skills and awareness of interactions between the vehicle, driver, and operating environment. Use of vision and sensitivity to vehicle language (communication from the car to the driver) is stressed throughout the day. During vehicle dynamics training students build experience behind the wheel that will help them maintain control over their vehicle, predict outcomes, and act when necessary to improve those outcomes. These skills are applied to exercises such as �swerve to avoid� that increase students� ability to avoid collisions. As training progresses the focus shifts from basic vehicle dynamics to solving security problems. The students learn to escape an ambush by both driving in reverse and ramming a vehicle (ramming may be simulated). This exercise now includes a familiarization on negotiating curbs. Students are instructed how to safely climb and descend a curb as a possible escape maneuver. The students learn to take over driving a vehicle from the passenger seat in the event the driver is incapacitated. The final exercises of the driver training block are scenario based. These scenarios (drive through, ramming, and reverse out) are designed to get the students to think about some common situations they may face if they are under attack. During barricade confrontations students are coached to maintain a high level of awareness, especially when entering a choke point. Students are trained to recognize the elements of an ambush to recognize an attack before it starts and to take immediate action. Security awareness will always be the key to successful performance in these final exercises. The FACT-E course utilizes three (3) practical exercise attack scenarios. Although a requesting agency does not have to duplicate the DS scenarios exactly, the scenarios must demonstrate the student�s ability to integrate skills learned in the FACT-E course. 4.1. Vehicle Dynamics I: This module is intended to instruct students in a variety of driving techniques and skills. Objectives: - Identify the relationship between vehicle dynamics and vehicle language - Demonstrate the correct driving form - Demonstrate using your eyes to steer - Identify the importance of weight and balance - Demonstrate the correct braking technique - Demonstrate the correct off-road recovery technique - Demonstrate the corrective action for skids 4.2. Vehicle Dynamics II: This module is intended to instruct students on a variety of driving techniques and skills. Objectives: - Demonstrate the correct technique of braking and turning (swerve to avoid) - Demonstrate the correct technique of turning and braking (braking in turns) - Employ using your eyes to steer - Employ the corrective action for front and rear skids - Employ the correct driving form - Employ off-road recovery techniques - Discuss the importance of tire pressure - Employ proper braking technique using the anti-lock braking system - Demonstrate various methods of driving in reverse - Demonstrate the ability to perform a �Y� turn - Demonstrate the correct technique for driving from the passenger seat - Demonstrate, Describe, OR perform barricade breaching maneuver (ram) (Video provided for demonstration/description) - Describe proactive security measures - Describe reactive security measures - Respond to choke points in travel route - Respond to attack indicators in a high threat environment - Drive on unimproved surfaces - Describe how to change a tire (Video provided) - Describe how to evacuate a vehicle after a rollover (Video provided) 4.3. Vehicle Dynamic Instructor Requirements: The contractor shall provide a primary instructor and assistant instructor for classroom portion of this training. For PEs, the contractor shall provide one instructor in each vehicle and an additional �Control or Safety Officer� to supervise the range operations. The contractor shall provide two assistant instructors as a role player for Attack scenarios. 4.4. Vehicle Dynamics Facility Requirements: The contractor shall provide an academic classroom suitable for instructing 30 students� en masse and be equipped with effective instruction with functional student tables, chairs, computer presentation systems, etc. The contractor must provide a paved track on site of at least 1000 feet x 75 feet dimensions and an unpaved (or mixed) track of at least 250 feet x 40 feet suitable for conducting the Off-Road Recovery event. Tracks should be surrounded by at least 50 feet of obstacle free terrain for safety. The estimated space requirements for each training event are: 1. Threshold Braking � 250ft x 40ft improved road surface. 2. Swerve to Avoid � 200ft x 75ft improved road surface. 3. Braking Inside a Turn � 250ft x 75ft improved road surface. 4. Proper Reversing /Serpentine � 500ft x 40ft improved road surface. 5. Off Road Recovery � 250ft x 40ft improved and unimproved road surface. 6. Conduct �Y� Turn � 250ft x 75ft improved road surface. 7. Down Driver Drill � 500ft x 75ft improved road surface. 8. Attack Recognition � 500ft x 75ft improved road surface with adequate area to allow the contractor to conduct one simulated attack per student driver. The contractor shall develop multiple Attack Recognition scenarios to allow for varying attack methods for different drivers. For example, the Attack Recognition scenario for one driver might be a disabled vehicle blocking the route while the scenario for the next driver might be a hostile vehicle in pursuit. This variation is required because drivers will usually be passengers during a previous event. 4.5. Vehicle Dynamics Equipment, Training Aid and Requirements: The contractor shall provide the following equipment and training aids to support training: 1. Road Cones/ Cones to run #1-7 events concurrently; 2. Sedan style vehicles to be used for evasive driving training (per class). Contractor will ensure that they have enough vehicles to meet training objectives within the allotted time provided in the POI and have the capability to self-recover their vehicles or conduct minor maintenance (flat tire, dead battery, etc.) with no interruption to training. Vehicles must be fully fueled, and additional fuel should be on-site. 3. One (1) weapon for every role player. Each weapon should have audible/non-lethal effects (i.e., paintballs). 5 Fire as a Weapon: The purpose of this subject area is to familiarize students with techniques and skills to egress from various hazardous environments. The contractor shall ensure students can plan, identify, and mitigate infrastructure and environmental hazards in relation to fire and smoke. The contractor shall review fire safety equipment and teach students how to recover from fire. The contractor should require Participants to crawl low to the ground and demonstrate safe egress techniques from a smoke-filled environment, simulating an emergency egress from a typical safe haven. The contractors shall instruct students on proper ways of dealing with a fire emergency. The contractor shall ensure students understand that fire, heat and smoke can escalate rapidly, and the danger is compounded if the fire occurs from an attack. The contractor shall ensure students learn about procedures to quickly and safely evacuate while under attack from a contractor role player. The contractor shall provide one (1) non-lethal weapon and ten rounds (paintballs or similar) per student for each scenario. 5.1. Fire as a Weapon Learning Objectives: At the completion of training, each student shall successfully demonstrate the ability to: 1. Discuss instances during which fire was used as a weapon on U.S. embassies, consulates, and missions; 2. Describe the factors that create the combustion process and the dangers of smoke and heat; 3. Identify the five (5) classifications of fire and their characteristics; 4. Identify how different building materials react to fire and smoke; 5. Identify the origin and location of a post�s Emergency Action Plan (EAP); 6. Identify the proper egress procedures for exiting a smoke-filled environment during a threat action; 7. Recognize the components of the Ocenco M-20.2 Emergency Escape Breathing Device (EEBD); 8. Identify the proper use of the A, B, and C rated portable fire extinguisher. Min of (5lbs); and 9. Properly use an ANSUL portable fire extinguisher (based on video demonstration). 5.2. Fire as a Weapon Training Instructor Requirements: The contractor shall provide a primary instructor and an assistant instructor for classroom portion of this training. For PEs, the contractor shall provide one additional person to operate the fog machines/equipment during the exercise. 5.3. Fire as a Weapon Facility Requirements: The contractor shall provide the following facilities to support training: 1. An academic classroom suitable for instructing 30 students en masse and be equipped for effective instruction with functional student tables, chairs, computer presentation systems, etc. 2. A realistic training environment which includes the classroom and a building or series of rooms capable of being flooded with non-toxic smoke and marked with approved emergency egress tape that is used at embassies overseas. 5.4. Fire as a Weapon Equipment, Training Aid and Requirements: The contractor shall provide the following equipment and training aids to support training. 1. Auto fire extinguisher (2lb) Class B/C 2. Fire extinguisher (8.5lb) 3-A, 40-B:C 3. Fire Extinguisher w/WLHOK (ProPlus 2.5 W H2O Fire Extinguisher or equivalent) 2.5gal, 20.86lb, 2-A 4. 10 lb. Extinguisher (RP-I-10-G-1) 5. Ocenco M-20.2 Emergency Escape Breathing Device � EEBD 6. High energy glow tape; 2 inch wide, 20 feet long 7. Glow-Dark tape, solid arrow x 4 8. Rescue Randy type manikin (6 feet tall, 165lbs) (Simulaids Combat Challenge model or similar) 9. Table (6-8 feet long) x 3 10. Chair x 6 11. Fire/smoke alarm x 3 12. Megaphone 13. Fog machines (quantity dependent on ability to obscure vision in provided room/hallway) 14. Strobe light x 2 5.4.1. Culminating Exercise: The purpose of the Culminating Exercise is to allow participants to practice personal security awareness while carrying out official functions in a high threat, high risk, and high stress environment. The contractor shall develop realistic scenario-based training that allows students to test their knowledge on all training objectives. Students will execute scenario-based training in groups of no larger than three (3). 5.5. Culminating Exercise Learning Objectives: At the completion of the Culminating Exercise, each student shall be able to successfully demonstrate the following: 1. Proper reaction to direct fire engagement; 2. Evasive driving techniques; 3. Application of MARCH; 4. Evacuation of a casualty; 5. Movement to safe haven; and 6. Communication with an operations center. 5.6. Culminating Exercise Instructor Requirements: The contractor shall provide five (5) instructors for this exercise. Four instructors will serve as enemy role players. One (1) instructor will serve as Control Safety Officer. 5.7. Culminating Exercise Facility Requirements: The contractor shall provide the following facilities to support the Culminating Exercise: 1. Simulated urban environment navigable by vehicle; 2. Safe haven building to be used for triage and extraction; 3. Break contact lane with various types of cover; 5.7.1. Culminating Exercise Equipment, Training Aid and Requirements: The contractor shall provide the following equipment and training aids to support training. 1. Four (4) Non-Lethal Firearms with no less than ten (10) non-lethal rounds (paintballs) per student per exercise iteration. 2. Authorized Protective Eyewear List approved eye protection for all students participating in the exercise. 3. Vehicles that seat a minimum of four (4) personnel. Vehicles can be of various types. Vehicle requirements must be sufficient enough to support the requirements within the allotted time. Vehicles must be adequately fueled and maintained to support the exercise. 4. At least one (1) full body trauma mannequin or other full body mannequin with moulage kit x 2 or rescue with application moulage kits to simulate gunshot wounds trauma; 5. IFAK (one (1) per team); 6. Combat gauze (one (1) per team), (Kerlix non-surgical � 6ply, 100% cotton, 4.5� x 4.1 yards or similar) 7. Survival thermal blanket (one (1) per team); 8. Litter to package and transport casualties x 4; and 9. 10. Special Operations Forces Tactical Tourniquet (one (1) per team). B. ACQUISITION APPROACH The purpose of this Sources Sought Notice (SSN) is to improve the Government�s understanding of the requirements and industry capabilities to establish the best acquisition approach. Industry feedback is vitally important, and the Government will be receptive to all ideas received from industry. SATMO and the Army Contracting Command-Orlando are seeking a contractor who can provide all the services stated above. Based on market research results, a competitive request for proposal is anticipated. C. RESPONSES REQUESTED Submissions: Respondents are asked to submit replies no later than 12:00 PM Eastern Time, on May 30, 2025, by email to john.m.ebanks.civ@army.mil with a courtesy copy to caryn.h.mcgraw.civ@army.mil or alternatively by mail to: U.S. Army Contracting Command, ATTN: ACC-ORL-OPD John M. Ebanks, CIV USARMY ACC (USA), 12211 Science Drive, Orlando FL 32826-3224. Electronic submissions are strongly encouraged. Acknowledgements of receipt will not be made. Format: Do not exceed 20 pages, including the cover page. Every page of your response should include your company�s name as well as page number, i.e. Page # of 20. In addition, you may include up to five attachments that consist of pre-printed commercial brochures or sales literature. Font shall not be smaller than industry standard word processor 12-point Times New Roman. Electronic submissions shall be in MS Word or Adobe PDF format. Cover Page: Include on the cover page the company name, address, Commercial and Government Entity code, and point of contact with name, title, phone number, and email address. Also indicate the SSN title and number. Size of Business: Provide a statement indicating if your firm is a large or small business. If small, please indicate any applicable socio-economic status such as Small Disadvantaged Business, Service-Disabled Veteran-Owned Small Business, 8(a), HUB Zone, etc. NAICS Codes: The Government is considering NAICS code: 611699, All Other Miscellaneous Schools and Instruction. Feedback from industry on suggestions for possible NAICS codes that best fit this requirement is requ...
 

Web Link

SAM.gov Permalink
(https://sam.gov/opp/2c8aa41daba74e93a8b6dddddebda870/view)
 

Place of Performance

Address: Fort Liberty, NC 28310, USA

Zip Code: 28310

Country: USA
 

Record

SN07425394-F 20250501/250429230057 (samdaily.us)
 

Source

SAM.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |