SAMDaily.us | MOD | J | Overhaul and Repair of Aids to Navigation (ATON) Buoys and Parts

SAMDAILY.US - ISSUE OF JANUARY 16, 2021 SAM #6988
MODIFICATION

J -- Overhaul and Repair of Aids to Navigation (ATON) Buoys and Parts

Notice Date: 1/14/2021 11:59:14 AM
Notice Type: Combined Synopsis/Solicitation
NAICS: 332313 — Plate Work Manufacturing
Contracting Office: DOL-9 NORFOLK VA 23510 USA
ZIP Code: 23510
Solicitation Number: 70Z08421RBHQ01700
Response Due: 2/11/2021 12:00:00 PM
Archive Date: 02/26/2021
Point of Contact: Barbara T. Spruill, Phone: 7576284159, COURTNEY BAKER-WILLIAMS, Phone: 7576284042
E-Mail Address: barbara.t.spruill@uscg.mil, COURTNEY.BAKER-WILLIAMS@USCG.MIL
(barbara.t.spruill@uscg.mil, COURTNEY.BAKER-WILLIAMS@USCG.MIL)
Small Business Set-Aside: SBA Total Small Business Set-Aside (FAR 19.5)
Description: 1. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued.� This is a Request for Proposal (RFQ) and the solicitation number is 70Z08421RBHQ01700.� This request is being issued by Contract Office 7008: USCG Director of Operational�Logistics (DOL-95), 300 East Main Street, Suite 965, Norfolk, VA 23510.� Sources Sought Notice 70Z0 2. This notice incorporates provisions and clauses in effect through Federal Acquisition Circular 2020-06.� The full text of FAR Clauses may be accessed electronically at:� https://www.acquisition.gov/browse/index/far The full text of HSAR Clauses may be accessed electronically at: https://www.acquisition.gov/hsar 3. This Request for Proposal is issued to establish a Combination Firm-Fixed Price and Requirements contract for a contract to provide all necessary management, supervision, personnel, labor, materials, transportation, general and specialized equipment (except for Government Furnished Property (GFP) identified in Technical Exhibit Two (TE-2), required to perform the overhaul, outfitting, and transportation of U.S. Coast Guard owned Aids to Navigation (ATON) buoys.� Performance shall be according to standards contained in the attached Performance Work Statement (Attachment 6). �The U.S. Coast Guard, Waterways Operations Product Line requires the Contractor(s) to perform overhaul/repair services for ATON buoys. The USCG has a need up to five separate contracts to overhaul/ repair buoys located within five established regions. These regions have been determined by current USCG District maps.� Region One (1) � Southwest (D11): Primary locations include; San Francisco, CA and San Pedro, CA; Region Two (2) � Northeast (D1): Primary locations include; IPD South Weymouth, and ANT South Portland, ME, Newport, RI, Rockland ME, Bayonne NJ, Long Island Sound, NY; Region Three (3) � Mid-Atlantic (D5): Primary locations include; Portsmouth, VA, Baltimore, MD, Atlantic Beach NC, Philadelphia PA; Region Four (4) � Southeast (D7 and D8): Primary locations include; Key West FL, Jacksonville FL, Charleston SC, North Charleston FL, Pensacola FL, St. Petersburg FL, Mobile, AL, and Galveston, TX; Region Five (5) � Midwest (D9): Primary locations include; Milwaukee, WI, Sturgeon Bay, WI, Essexville, MI, Sault Ste Marie, MI, Detroit MI, Cheboygan, MI, Port Huron, MI, Buffalo NY, Duluth MN. 4. The following Attachments apply to RFP 70Z08421RBHQ01700: Attachment 1: Schedule of Supplies/Services_Region 1 Attachment 2: Schedule of Supplies/Services_Region 2 Attachment 3: Schedule of Supplies/Services_Region 3 Attachment 4: Schedule of Supplies/Services_Region 4 Attachment 5: Schedule of Supplies/Services_Region 5 �� Note: Vendor shall enter unit price, cells for total price cells contain formulas and will calculate automatically Attachment 6: Performance Work Statement (PWS) Attachment 7: Specification for Overhaul of Steel Ocean Buoys � 507B *Attachment 8: Wage Determination for all locations.� The Wage Determination applicable to the successful offer�s facility will be incorporated into the contract documents, all others will be removed at time of award. San Francisco, CA- WD 2015-5637 Revision 15 Dated 06/13/2020 San Pedro, CA-WD 2015-5613 Revision 15 Dated 06/13/2020 Weymouth, MA- WD 2015-4048 Revision 14 Dated 04/09/2020 Newport, RI- WD 2015-4089 Revision 13 Dated 04/13/2020 Bayonne, NJ-WD 2015-4186 Revision 15 Dated 04/09/2020 Long Island Sound, NY-WD 2015-4157 Revision 11 Dated 04/20/2020 Portsmouth, VA-WD 2015-4340 Revision 14 Dated 08/04/2020 Baltimore, MD-WD 2015-4265 Revision 13 Dated 04/22/2020 Atlantic Beach, NC-WD 2015-4401 Revision 12 Dated 05/29/2020 Philadelphia, PA-WD 2015-4234 Revision 16 Dated 04/21/2020 Key West, FL-WD 2015-4584 Revision 14 Dated 05/03/2020 Jacksonville, FL-WD 2015-4539 Revision 11 Dated 08/28/2020 Pensacola, FL-WD 2015-4562 Revision 14 Dated 06/18/2020 St. Petersburg, FL-WD 2015-4572 Revision 12 Dated 06/18/2020 Charleston, SC-WD 2015-4428 Revision 15 Dated 06/03/2020 Mobile, AL-WD 2015-4606 Revision 11 Dated 06/18/2020 Galveston, TX-WD 2015-5234 Revision 14 Dated 06/27/2020 Milwaukee, WI-WD 2015-4900 Revision 12 Dated 06/23/2020 Sturgeon Bay, WI-WD 2015-4920 Revision 14 Dated 05/10/2020 Essexville, MI-WD 2015-4838 Revision 12 Dated 06/19/2020 Sault Ste Marie, MI-WD 2015-4872 Revision 15 Dated 06/21/2020 Detroit, MI-WD 2015-4840 Revision 15 Dated 05/10/2020 Cheboygan, MI-WD 2015-4873 Revision 13 Dated 05/10/2020 Port Huron, MI-WD 2015-4868 Revision 15 Dated 05/10/2020 Buffalo, NY-WD 2015-4868 Revision 15 Dated 05/10/2020 Duluth, MN-WD 2015-4148 Revision 16 Dated 04/24/2020 **Attachment 9:�� Past Performance Questionnaire (PPQ) (to be removed at time of award Attachment 10:� Technical Exhibits �� TE-1 Performance Requirements Summary and QASP �� TE-2 Government Furnished Property (GFP) �� TE-3 Required Delivery Days �� TE-4 Estimated Color Schemes �� TE-5 Foam Buoy Repair �� TE-6 Forms Attachment 11:� DHS Form 7003-3, Contractor�s Release or Equivalent Attachment 12:� DHS 700-21, Material Inspection and Receiving Report (MIRR) Attachment 13: �� Drawing List � 107334H-2 Ball Vent Valve 121157D-3 � X8LR Buoy Assembly and Details (1992 type) 121158E-5X11LR Buoy Assembly and Details (1992 type) 121160C-5x11LR and 3-1/2x8 LR Pocket Covers 121159D-Standard Buoy Tappers & Adapter Plate 120777E-Buoy Whistle & Valve 120994F-Buoy Bells & Gongs 120998F-Lighted Buoys Bell & Gong Stands 121024H-3-1/2 & 5 FT. Buoys Can Radar Reflector 120316G-3-1/2 & 5 FT Buoys Nun Radar Reflector 121102G-Swingbolt and Clevis Pin 121104G-22"" Battery Pocket Cover 121143D-24"" Battery Pocket Cover 121162A-22"" and 24"" Battery Pocket Conversion Kit 121100M-Solar Buoy Double Battery Box 121108F-1988 Type First Class Nun Buoy (1NR) 121109F-1988 Type First Class Can Buoy (1CR) 121110E-1988 Type Second Class Nun Buoy (2NR) 121111F-1988 Type Second Class Can Buoy (2CR) 121112G-1988 Type Third Class Nun Buoy (3NR) 121113G-1988 Type Third Class Can Buoy (3CR) 121129G-1988 Type 7x17LR Buoy 121130F-1989 Type 8x26LR Buoy 121131F-1989 Type 8x26LWR Buoy 121132F-1989 Type 9x32LR Buoy 121137F-1990 Type 9x20 R Buoy 121145E-1991 Type 8x21LR Buoy 121151F-9x35 LWR Buoy 121152F-1992 Type 6x20LR Buoy 121174A-8x26LR/LWR Buoy Tower 121175A-8x21LR & 9x20 R Tower 121176-6x20LR & 7x17LR Buoy Tower 121140E-Buoy Lift Eyes 121188-2010 Type 8x26LR 121189-2010 Type 8x26LWR 121191-2010 Type 7x17LR 121192-2010 Type 6x20LR 121193A-2010 Type 7x20LIR Buoy 121056B-ATON Cover Plate for 9x35LWR 5. This solicitation is Set-Aside for Small Business Concerns (100%).� The North American Industry Classification (NAICS) 332313 and the size standard is 750 employees. 6. This requirement consists of a Base Year and Four (4) Options Years Anticipated Contract Performance Periods (dates may change based on contract award date) Base Period: �� 03 Mar 2021 (or date of award) 02 Mar 2022 Option Period 1:� �� 03 Mar 2022 � 02 Mar 2023 (If exercised by the Government) Option Period 2: �� 03 Mar 2023 � 02 Mar 2024 (If exercised by the Government) Option Period 3: �� 03 Mar 2024 � 02 Mar 2025 (If exercised by the Government) Option Period 4: �� 03 Mar 2025 � 02 Mar 2026 (If exercised by the Government) 7.� Schedule of Supplies/Services is provided as Attachment 1 � 5.� All prices submitted in response to this solicitation shall be in whole dollar amounts and based on fixed prices.� The schedule of Supplies/Services and Unit Price is divided into five (5) REGIONS with each REGION having five (5) performance periods each.� This solicitation may result in up to five contracts (one for each Region).� Offeror(s) have the option to propose on only one Region, on any two Region, any three Regions, on any four Regions or on all five Regions.� Contracts will be awarded to the offeror(s) who offer is most advantageous to the Government, price and other factors considered. 8. Any award resulting from this solicitation will be issued on a Standard Form (SF) 1449. 9. Systems for Award Management: IAW FAR 4.1102(a), offerors are required to be registed in the Systems for Award Management (SAM) database at the time an offer or quotation is submitted in order to comply with the annual representations and certification requirements.� Registration may be done on-line at www.sam.gov. 10. Payment will be made by Electronic Funds Transfer (EFT) to the financial institution listed in the System for Award Management (SAM).� Electronic submission of invoices is mandatory for this contract and/or any orders issued in accordance with this contract. All invoices from the Contractor shall be submitted electronically IAW FAR 52.232-33. Using Internet Explorer (not Google Chrome, Yahoo, Firefox, etc.) select the link: http://www.fincen.uscg.mil/electron_cg24.htm Click Online: Coast Guard Award Invoices or Contract/Order Invoices. This will take you to a login page. Please click on the link for the USCG Vendor Electronic Invoice Submissions Quick Reference Guide which will walk you through the process of creating a login and password needed to electronically submit invoices. https://www.fincen.uscg.mil/centralinv/USCGVendorElectronicInvoiceSubmissionsQuickReferenceGuide.pdf When filling out the Contractor Invoice Submission Form please be sure to select the Invoice Routing Code (SILC PCB-4) so the invoice reaches our office for processing. Please make sure you insert the contract and invoice number as it is documented on your contract task order and/or modification. If you have difficulties uploading your invoice, contact the Finance Center�s Customer Service Team at (757) 523-6940. Copies shall also be emailed to the Contract Specialist and the COR. a. Upon completion of each contract requirement the Contractor shall prepare and furnish to the COR/Alternate COR for approval a DHS 700-21 Form, Material Inspection and Receiving Report (MIRR).� One copy of each DHS 700-21 Form, or approved equivalent, shall be submitted with the invoice.� The report shall include: Contract Number including Task Order Number DHS 700-21 Form or equivalent invoice number. CLIN Number, CLIN description, quantity, unit price, and extended price. Description of any invoice deductions. A copy of the Progress Report (as necessary) Invoices shall not be submitted until the Material Inspection and Receiving Report (DHS 700-21) has been approved by the COR.� b. The Contractor shall submit all invoices for supplies or services via the U.S. Coast Guard Finance Center (FINCEN) website at:� www.fincen.uscg.mil (1) Select �Submitting Invoices� under �Vendors� on the right hand side of the screen. (2) Select �Coast Guard Vendors� (3) Select �Coast Guard Award Invoices or Contract/Order Invoice� (�24� document) (4) Select �Online: Coast Guard Award Invoices or Contract/Order Invoices � (5) Go to Step 3 (if contractor has already created a PDF invoice) to complete the �Contractor Invoice Submission Form�. c. The electronic submission requires the contractor to: (a) Complete the Contractor Invoice Submission Form (b) Select the correct Invoice Routing Code, which is SILC PCB-4 (the Contractor must select the correct Invoice Routing Code for timely invoice processing.) (c) Attach a single PDF file, which can be no larger than 3 MB, containing the invoice and any necessary supporting documentation.� (Grey-scale PDFs and Portfolio PDFs are not compatible.) (d) If your single PDF file is larger than 3 MB: Complete the Contractor Invoice Submission Form via the website and attach the invoice document only, then d. The Contractor shall submit a proper invoice as identified in FAR Clause 52.212-4(g) Invoice.� All invoices shall be itemized to correlate to the Schedule of Supplies/Services.� All improper invoices will be rejected which could delay payment. 11. Place of Performance:� Principle place of performance will be at the Contractor�s Facility with pick and delivery from various USCG locations. 12. It shall be the obligation of the offeror to exercise due diligence to discover and to bring to the attention of the Government any ambiguities, inconsistencies, or concerns regarding the information in this solicitation.� All questions/concerns regarding this solicitation shall be submitted via email (NO phone calls) to the Contract Specialist at barbara.t.spruill@uscg.mil no later than (28 JAN 2021) 3:00 PM Eastern. Follow-up/additional questions will not be accepted after this date.� Offerors shall reference the solicitation number and provide enough information in their e-mail so the Government can easily respond to their questions/concerns. All questions/concerns will be compiled and addressed on an �Amendment of Solicitation� (SF-30) and will be posted on the beta.SAM.gov website for viewing by all potential offerors. 13. Offerors responding to this announcement shall submit their proposals via email to barbara.t.spruill@uscg.mil.� All proposals must be received by 3:00 PM EST, Thursday, February 11, 2021 to be considered for award. FAR PROVISION 52.212-1: Instructions To Offerors-Commercial Items (JAN 2020). (a) North American Industry Classification System (NAICS) code and Small Business Size Standard. The NAICS code and business size standard for this acquisition appear in Block 10 of the solicitation cover sheet (SF 1449). However, the small business size standard for a concern which submits an offer in its own name, but which proposes to furnish an item which it did not itself manufacture, is 750 employees. �� (b) Submission of Offers. � Tailored Submit signed and dated offers to the office specified in this solicitation at or before the exact time specified in this solicitation. At a minimum, offerors must follow the instructions below (see (1) � (4) below) � (1)� Offer. Offerors are required to submit all of the documents and information listed below [(i) � (iii)] to be eligible for award.� Each Section/Volume shall be a separate document. Prices shall be submitted on the SF-1449; do not submit offers on company letterhead or any other method.� Incomplete information or errors could make an Offeror ineligible for award. �(i) Price Section/Volume � Schedule of Supplies/Services.� Offerors shall complete the following sections of the SF-1449 and submit with their offer: Solicitation Instructions (B) �Schedule of Supplies/Services� Complete the �Schedule of Supplies/Services and Unit Prices� by filling in ALL �unit prices�, �estimated amounts�, and �estimated grand totals.�� (Please double check your calculations) (C) HSAR Clause 3052.209-70(f) Complete paragraph (f) of HSAR Clause 3052.209-70,�Prohibition on Contracts with Corporate Expatriates. (D) FAR Provision 52.209-7(b) Complete paragraph (b) of FAR Provision 52.209-7,�Information Regarding Responsibility Matters (E) FAR Provision 52.209-11 Complete paragraph (b) of FAR Provision 52.209-11 Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law (FEB 2016) (F) FAR Provision 52.222-22 Complete paragraph(s) (a) and (b) of FAR Provision 52.222-22 Previous Contracts and Compliance Reports (Feb 1999) (E) FAR Provision 52.212-3 Complete FAR Provision 52.212-3 (Offeror Representations and Certifications-Commercial Items) by one of the following methods: Complete FAR Provision 52.212-3 attached to this solicitation and submit with offer, or Complete FAR Provision 52.212-3 on the SAM website: https://www.sam.gov/portal/public/SAM/. If the offeror completes the provision on the SAM website, the NAICS Code in paragraph 5 shall be listed in their SAM record.� An Offeror shall state in their offer if they completed FAR Provision 52.212-3 on the SAM website (the information in SAM must be up-to-date and valid). (ii) Technical Section/Volume. Offerors shall submit a Technical Section that includes the following information and/or documents with their offer: Documents/Information Instructions (1) Technical Approach/Capability Offeror shall address the following: Personnel and Staffing:� Offerors shall provide information to describe positions, position descriptions, indicate current employees or proposed hires, and levels of management to be on site during working hours (normal, after hours and emergency hours). Offerors shall provide certifications for welders and welding inspectors, and documentation on painters, as described in the PWS. Offerors shall describe the firm's recruitment, training programs, and initiatives to ensure adequate staffing and rationale for determining staffing requirements, in addition to a list of potential subcontractor that the offeror would intend to use for this contract (if any).� Describe what parts of the work the offeror would intend to subcontract. Specific Task Approach:� Offerors shall articulate their proposed method/approach for accomplishing the specific tasks outlined in C.5 of the Statement of Work and a well thought out approach that is likely to yield the required results, in addition to their overall understanding of the requirements.� The technical proposal should be precise and not assume the evaluation team is aware of the offeror�s capabilities, plans, facilities, organization or any other pertinent facts that are important to accomplish this requirement.� The use of general or vague statements such as �standard procedures will be used� or �good business practices will be used� will be interpreted as evidence of a lack of understanding on the part of the offeror and/or as inability to demonstrate adequate qualifications.� Describe what parts of the work the offeror would intend to subcontract. Transportation Approach:� Offerors shall describe how they will comply with requirements outlined in C.5 of the Statement of Work for handling buoys at the contractor's facility and the transportation between the contractor's facility and the USCG destinations. (2) Management Control Measures Offerors shall address the following: Environmental Controls:� Offeror�s shall describe environmental controls and compliance processes for handling and disposal of hazardous materials, petroleum products, toxic substances, and other hazardous waste.� Demonstrate an understanding of applicable environmental regulations, liabilities, and penalties for hazardous material storage, transportation, and disposal.� Discuss recycling and waste minimization.� Describe methods of control, retention, and disposal of blast media and dust. Quality Control:� Demonstrate understanding of required inspection points, procedures, and techniques prescribed in the PWS, and what quality control processes will be implemented to ensure full compliance with all Coast Guard technical requirements.� Provide method for quality control tracing systems and procedures for re-work or incomplete repairs. Property Management and Control:� Describe procedures to ensure availability of required parts, materials, and supplies including alternate sources as applicable.� Describe the offeror's existing equipment that will be required for this contract, including availability and contingency plans if this equipment becomes unavailable for use during the course of the contract.� Describe contingency plans for transferring parts after hours and under extreme weather conditions.� Identify the paint systems that will be used, and their compliance with Coast Guard requirements.� Describe the inventory control and management plan for Government Furnished property.� Describe the offeror's existing facilities that will be used to meet the requirements of this contract. (3) Recent, Relevant Experience Offerors shall provide up to three (3) projects within the past five (5) years that are similar in size, scope and complexity to this project.� Provide recent, relevant experience in the overhaul of navigational buoys or items of similar design and construction.� Offerors shall explain how the experience they have identified is to the proposed efforts.� Explanations may include discussions on significant achievements or past problems and how the problems were identified, managed, and resolved. Note:� Do not include prices in the Technical Section.� Unnecessary elaboration or other presentations beyond that sufficient to present a complete and effective offer/Technical Section are not desired. The use of general or vague statements such as �standard procedures will be used� or �good business practices will be used� will be interpreted as evidence of a lack of understanding on the part of the offeror and/or as inability to demonstrate adequate qualifications. Page Limit � 25 pages.� The government will not count a Cover Page, Cover Letter, Table of Contents, and/or Acronym List in the page limit(s) above. Definition of a Page: Each �page� is one single sided 8.5� x 11� sheet.� Each page shall have at least one inch margins on all sides and Times New Roman font with a 12 point size type or larger.� Tables/Charts/Graphs: The Times New Roman font with a 12 point size type or larger does not apply to tables, charts, and graphics as long as the font is legible. (4) Past Performance Section/Volume. Offerors shall submit with their offer the below information for up to three (3) different projects within the last five (5) years, the offeror included in its proposal for Factor 3, Recent Relevant Experience.� Only one Past Performance Questionnaire shall be completed per contract/order. Page Limit: 3 (Use the same �Definition of a Page� listed above) Note: The Government may use a variety of sources, data, and/or information available about the offeror�s current or past performance, not just the information identified by an offeror, to evaluate past performance.� All information obtained will be used to determine the offeror�s ability to perform a contract successfully.� See FAR Provision 52.212-2 for more information. Required Information: Name of Company or Government entity / Contract Number / Contract Type / Amount / Description of Supply or Service / Point-of-Contact (Name, E-mail Address and Phone Number) � (2) Past Performance Questionnaires.� Offerors are responsible for insuring that Past Performance Questionnaires (PPQ) (Attachment 9) are completed and submitted on up to three (3) different government (federal, state, local), private, and/or commercial contracts that have been awarded to the offeror. Instructions The Offeror shall send up to three (3) Past Performance Questionnaires (PPQ) to government (federal, state, local), private, and/or commercial entities for projects included in its proposal for Factor 3, Recent Relevant Experience completed within the past 5 years. Only one Past Performance Questionnaire shall be completed per contract/order. Who can complete a PPQ A point-of-contact (i.e., past performance evaluator) from the government (federal, state, local), private, or commercial entity that has firsthand knowledge of a contract awarded to the offeror shall complete a PPQ.� The same person cannot complete more than one Past Performance Questionnaire for an offeror.� PPQs shall be completed by the actual customer/end user. Who cannot complete a PPQ The offeror (including any employee/ team member of the offeror) cannot complete a PPQ for their company (or their proposed subcontractor/partner) or submit a PPQ to the government on behalf of a past performance evaluator.� A PPQ shall not be completed by a point of contact/employee of a prime contractor that your company worked for as a sub-contractor or your company�s parent, sister, or partner company. Submission of completed PPQs Each past performance evaluator shall submit a completed Past Performance Questionnaire (PPQ) directly to the Contract Specialist, by the �Offer Due Date/Local Time� (SF-1449/Block 8), unless extended by a solicitation amendment. Barbara Spruill/Ctr., Contract Specialist E-Mail:� barbara.t.spruill@uscg.mil Fax Number: (757) 628-4962 Note The Government may use a variety of sources, data, and/or information available about the offeror�s current or past performance, not just the information identified by an offeror, to evaluate past performance.� All information obtained will be used to determine the offeror�s ability to perform a contract successfully.� See FAR Provision 52.212-2 for more information. (3) Solicitation Amendments. If applicable, Offerors shall acknowledge all Solicitation Amendments. Offerors shall complete Blocks 8 and 15(a-c) on all Solicitation Amendments (SF-30) issued by the Government and submit with their offer.� Solicitation Amendments will be posted on the beta.Sam.gov website for all potential offerors to view. (4) Where to Submit Offers. Submit your offer (all the documents and information listed in subparagraph (b)(1)) to the below address or via e-mail; your offer shall be received at or before the exact date and time specified in this solicitation.� Do not submit offers via document sharing websites. Mailing/Physical Address United States Coast Guard DOL 95 COCO Attn: Barbara Spruill/Ctr�� 300 East Main Street, Suite 965 Norfolk, VA 23510-9112 E-Mail Address* Barbara.T.Spruill@uscg.mil DO NOT submit removable memory/storage devices or media, such as, flash drives, thumb drives, memory sticks, hard drives, CDs, DVDs,� or any other similar devices. USCG policy prohibits the use of removable memory/storage devices or media on USCG workstations and the USCG network. (c) Period for Acceptance of Offers. � Tailored The offeror agrees to hold the prices in its offer firm for 90 calendar days from the date specified for receipt of offers, unless another time period is specified in an addendum to the solicitation. (d) Product samples. When required by the solicitation, product samples shall be submitted at or prior to the time specified for receipt of offers. Unless otherwise specified in this solicitation, these samples shall be submitted at no expense to the Government, and returned at the sender�s request and expense, unless they are destroyed during preaward testing. (e) Multiple offers. Offerors are encouraged to submit multiple offers presenting alternative terms and conditions or commercial items for satisfying the requirements of this solicitation. Each offer submitted will be evaluated separately. �(f) Late submissions, modifications, revisions, and withdrawals of offers. (1) Offerors are responsible for submitting offers, and any modifications, revisions, or withdrawals, so as to reach the Government office designated in the solicitation by the time specified in the solicitation. If no time is specified in the solicitation, the time for receipt is 4:30 p.m., local time, for the designated Government office on the date that offers or revisions are due. (2)(i) Any offer, modification, revision, or withdrawal of an offer received at the Government office designated in the solicitation after the exact time specified for receipt of offers is �late� and will not be considered unless it is received before award is made, the Contracting Officer determines that accepting the late offer would not unduly delay the acquisition; and� (A) If it was transmitted through an electronic commerce method authorized by the solicitation, it was received at the initial point of entry to the Government infrastructure not later than 5:00 p.m. one working day prior to the date specified for receipt of offers; or (B) There is acceptable evidence to establish that it was received at the Government installation designated for receipt of offers and was under the Government�s control prior to the time set for receipt of offers; or (C) If this solicitation is a request for proposals, it was the only proposal received. (ii) However, a late modification of an otherwise successful offer, that makes its terms more favorable to the Government, will be considered at any time it is received and may be accepted. (3) Acceptable evidence to establish the time of receipt at the Government installation includes the time/date stamp of that installation on the offer wrapper, other documentary evidence of receipt maintained by the installation, or oral testimony or statements of Government personnel. (4) If an emergency or unanticipated event interrupts normal Government processes so that offers cannot be received at the Government office designated for receipt of offers by the exact time specified in the solicitation, and urgent Government requirements preclude amendment of the solicitation or other notice of an extension of the closing date, the time specified for receipt of offers will be deemed to be extended to the same time of day specified in the solicitation on the first work day on which normal Government processes resume. (5) Offers may be withdrawn by written notice received at any time before the exact time set for receipt of offers. Oral offers in response to oral solicitations may be withdrawn orally. If the solicitation authorizes facsimile offers, offers may be withdrawn via facsimile received at any time before the exact time set for receipt of offers, subject to the conditions specified in the solicitation concerning facsimile offers. An offer may be withdrawn in person by an offeror or its authorized representative if, before the exact time set for receipt of offers, the identity of the person requesting withdrawal is established and the person signs a receipt for the offer. (g) Contract award (not applicable to Invitation for Bids). The Government intends to evaluate offers and award a contract without discussions with offerors. Therefore, the offeror�s initial offer should contain the offeror�s best terms from a price and technical standpoint. However, the Government reserves the right to conduct discussions if later determined by the Contracting Officer to be necessary. The Government may reject any or all offers if such action is in the public interest; accept other than the lowest offer; and waive informalities and minor irregularities in offers received. (h) Multiple awards. The Government may accept any item or group of items of an offer, unless the offeror qualifies the offer by specific limitations. Unless otherwise provided in the Schedule, offers may not be submitted for quantities less than those specified. The Government reserves the right to make an award on any item for a quantity less than the quantity offered, at the unit prices offered, unless the offeror specifies otherwise in the offer. (i) Availability of requirements documents cited in the solicitation. (1)(i) The GSA Index of Federal Specifications, Standards and Commercial Item Descriptions, FPMR Part 101-29, and copies of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained for a fee by submitting a request to� GSA Federal Supply Service Specifications Section Suite 8100 470 East L�Enfant Plaza, SW Washington, DC 20407 Telephone (202) 619-8925 Facsimile (202) 619-8978. (ii) If the General Services Administration, Department of Agriculture, or Department of Veterans Affairs issued this solicitation, a single copy of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained free of charge by submitting a request to the addressee in paragraph (i)(1)(i) of this provision. Additional copies will be issued for a fee. (2) Most unclassified Defense specifications and standards may be downloaded from the following ASSIST websites: (i) ASSIST (https://assist.dla.mil/online/start/). (ii) Quick Search (http://quicksearch.dla.mil/). (iii) ASSISTdocs.com (http://assistdocs.com). (3) Documents not available from ASSIST may b...
Web Link: SAM.gov Permalink
(https://beta.sam.gov/opp/7b591545f81c4e6aaba60350143399b5/view)
Place of Performance: Address: USA; Country: USA
Record: SN05892001-F 20210116/210114230105 (samdaily.us)
Source: SAM.gov Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's SAM Daily Index Page |

Loren Data's SAM Daily™

J -- Overhaul and Repair of Aids to Navigation (ATON) Buoys and Parts