SOURCES SOUGHT
99 -- Third Generation Forward Looking Infrared (3GEN FLIR) Dewar Cooler Bench (DCB)
- Notice Date
- 7/6/2020 5:19:55 AM
- Notice Type
- Sources Sought
- NAICS
- 334511
— Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing
- Contracting Office
- ACC-ABERDEEN PROVING GROUNDS CONT C ALEXANDRIA VA 22331-0700 USA
- ZIP Code
- 22331-0700
- Solicitation Number
- W909MY-20-R-C025
- Response Due
- 8/6/2020 12:00:00 PM
- Archive Date
- 08/21/2020
- Point of Contact
- Michael Sampson, Sabin Joseph
- E-Mail Address
-
michael.a.sampson18.civ@mail.mil, sabin.a.joseph.civ@mail.mil
(michael.a.sampson18.civ@mail.mil, sabin.a.joseph.civ@mail.mil)
- Description
- The Army Contracting Command-Aberdeen Proving Ground (ACC-APG) Belvoir Division is conducting market research on behalf of the US Army Product Manager Ground Sensors, in accordance with Federal Acquisition Regulation (FAR) Part 10. The purpose of this Market Research is to identify potential sources that have the skills, experience, knowledge, and capabilities required to manufacture and deliver Third Generation Forward Looking Infrared (3GEN FLIR) Dual Band Infrared Dewar Cooler Bench (DCB) under Low Rate Initial Production (LRIP) and Full Rate Production (FRP) contracts.� The 3GEN FLIR program is currently in the Engineering and Manufacturing Development (EMD) Phase of the Acquisition Life Cycle.� Upon the completion of the EMD Phase and entrance into the Production and Deployment Phase, the US Army plans to award an LRIP contract for 3GEN FLIR DCBs.� The purpose of the LRIP contract is to establish an initial production base for 3GEN FLIR DCBs and permit an orderly increase in the production rates leading to FRP. During LRIP, the US Army plans to procure approximately 400 3GEN FLIR DCBs over a 2 year period.� Upon completion of Operational Test and Evaluation, the US Army plans to procure over 9,000 DCBs during FRP.������ The DCB is defined as the assembly and integration of the following 6 sub-assemblies and electronic modules: a. Integrated Dewar /Cooler b. Dual Band Infrared Focal Plane Array (FPA) Format:� HD 1280x720P: Mid-Wave Infrared (IR) Long-Wave IR. c. In-Dewar Variable Aperture Mechanism �d. Control Electronics for the FPA, Variable Aperture Mechanism, B-kit Communications, and Video Output e. Control Electronics for the Cooler f. Mechanical bench The DCB will be provided as Government Furnished Property (GFP) for integration into an upper assembly composed of Optics and Video Processing electronics called the B-Kit.� The integration work will be performed by the B-Kit supplier.� The DCB and B-Kit sub-assemblies and electronic modules, defined under RFI W909MY-20-R-C025 will be integrated on host platforms to compose a 3GEN FLIR sensor.� The DCB is currently defined by the following technical documents: a. A3347043: Performance Specification for the DCB b. A3347044: DCB Interface Control Document (ICD) c. A3347045 Drawing -� 3GEN FLIR DCB Mechanical Drawing �� The documents listed above are Distribution D restricted. The documents are authorized for use by the Department of Defense (DoD) and U.S. DoD contractors only.� These documents also contain technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et seq.) or the Export Administration Act of 1979 (Title 50, U.S.C., App. 2401 et seq.), as amended.� Violations of these export laws are subject to severe criminal penalties.� These documents will be disseminated in accordance with provisions of DoD Directive 5230.25. In order to be considered technically responsive, sources must have a fully qualified DCB that has either completed System Verification Review (SVR) and Functional Configuration Audit (FCA) or where the supplier can demonstrate with data that their design meets all of the requirements in the technical documents defined above.� Sources must be willing to provide these results, if requested, to verify that the DCB meets the requirements of the Government�s functional baseline as defined by the DCB Performance Specification, ICD, and Mechanical Drawing. Companies or organizations may request copies of these documents by providing their Point of Contact information listed below to Sharon Minor at Sharon.R.Minor.civ@mail.mil and must clearly state if and how they meet the conditions under which they can receive the documents referenced above.� In addition, companies requesting the above information must register for an account with an internet accessible portal known as the Corporate Management System Online (CMS II). Registrants will access the CMS II website (https://www.mycmsportal.com) and follow instructions to complete registration. Documents are currently available for viewing in the CMS II under the 3GEN FLIR folder so the registrants must specifically request access to only the 3GEN FLIR folder. Access to the 3GEN FLIR folder documents will only be granted upon verification that criteria dictated by Distribution D and export control restrictions are met by registered companies or organizations. Foreign participation is excluded. SECRET Clearance, at a minimum, is required. No classified information will be provided as part of this RFI, however, in the event of any subsequent Request for Proposal or Request for Quotation, classified information may become part of that solicitation and will be required as part of any resulting contract. Sources will be required to complete an abbreviated design review prior to LRIP manufacturing to demonstrate the design meets stated performance requirements within cost, schedule, and risk.�� Sources responding to this Request for Information (RFI) are requested to provide answers to the following questions with as much detailed information as possible: 1. Brief summary of the company Company Information Company Name: Company CAGE Code: Company DUNS Number. If your Company holds a GSA Schedule contract (541 or other), please provide the Schedule number Company: Address Company Phone # Company email: Company Representative and Business Title: Company Socioeconomic Classification -- (Small Business (SB), (8)(a), Woman-Owned (WOSB), Economically-Disadvantaged Women-Owned (EDWOSB), Veteran-Owned and Operated(VOSB), Service-Disabled Veteran-Owned, (SDVOSB), or Historically Underutilized Small Business-Zone (HUBZone), Historically Black College and Universities/ Minority Institutions (HBCU/MI)) 2. Describe plans to have a Government qualified DCB by the time of LRIP award and under what contract(s) the work was performed.� 3.� Describe capability to build and test a production representative DCB in accordance with the technical documents listed above.� 4. Describe an execution plan for producing first articles, conduct a first article test, and enter production. At a minimum the plan should include: a. A detailed timeline from theoretical contract award to delivery of LRIP items.� Within the timeline, please include major milestones of first articles, contractor qualification testing, and transition to production.�� b. Any major capital purchases, key tests, engineering, and documentation required to produce requested items.� c. Any Government Furnished Equipment, Government assisted testing, or Government facilities required.� d. A risk assessment for each item your company believes they can produce. e. Ramp rate and maximum monthly capacity your company believes they can produce. f. Estimated lead time for new orders after qualification. g. Rough order of Magnitude (ROM) costs for Non-Recurring tasks to set up and qualify first article.�� Please separate cost estimates by major milestones, key events, and key equipment purchases.� � 5. Identify sources of supply for any components or assemblies for which you are likely to subcontract production. Standard off the shelf components, such as catalog items, do not need to be addressed. a. What are the supplies being subcontracted? b. Will any SBs be the supplier, if so what percentage will be supplied by SBs? 6. Will any of your manufacturing, assembly, or engineering be accomplished outside the USA?� If so, please provide details on how you will keep this program International Trade in Arms Regulations compliant. 7. Describe your company�s approach to manage and mitigate obsolescence. At a minimum include the following: a. Obsolescence tracking and industry monitoring b. Assessment if the current design is producible without additional design work c. Potential issues ordering long lead or custom items d. Capability to redesign out obsolete components and produce and qualify a replacement item. 8.� Provide a Rough Order of Magnitude (ROM) unit cost of each item which you wish to produce at the below quantity range bins.� If separate Non-Recurring Engineering (NRE) costs are required, as per question 6 please provide an estimated cost for the NRE broken down into what your company believes are logical decision points from the execution plan. If NRE is to be amortized across a buy it may be included here with explanation. a. 10-25 b. 26-50 c. 51-100 d. 101-200 e. 200+ 9. Is your company planning on business arrangements with other companies? If so, please advise of the process used in selecting members. 10. Please provide details regarding proposed joint ventures, teaming arrangements, strategic alliances, and/or other business arrangements to satisfy these requirements. Offerors are encouraged to identify teams, indicating each team member's size based upon the NAICS code of the work that the team member may be doing. 11. What are the core competencies of your employees that would support these requirements? Also, please provide the total number of individuals currently employed by your company that are capable of supporting the requirements. 12. Does your company have a SECRET facility or access to one? 13. Do all of the employees that would support this requirement have a security clearance? If not, what percentage of employees that will be involved in this effort, have a security clearance? 14. Please provide your current facility size to include storage capabilities. 15. Discuss existing production capacity. If you do not currently have a production line what quantities are required to start one and keep it running. Additionally, what minimum quantities per year are necessary to maintain the industrial base? 16. Does your firm possess an approved Defense Contract Audit Agency (DCAA) accounting system? QUESTIONS 17 - 19 ONLY APPLY TO THE SMALL BUSINESS RESPONDENTS: In addition to the above, small businesses responding should provide the following information: 17. If you identify your company as a Small Business or any of the Small Business subcategories above, then is your company interested in being a prime on this contract?If so please inform how you will meet the limitations on subcontracting Clause 52.219-14. 18. Under the current SB size standard, do you anticipate your company remaining a small business for at least the next three years, under the stated NAICS code 334511?� The Government will use this information to assist in determining if this effort is eligible as a small business set aside. 19. If you are a small business, can your company sustain if not paid for 90 calendar days? 21. The Government requests that interested parties with the capabilities to meet the above requirements should electronically submit White Papers of not more than twenty (20) pages, 8.5"" x 11"" paper, 12-point, Times New Roman font, with a minimum of one (1) inch margins all around. Responses to Small Business Questions 20 thru 24 are not counted in the above stated twenty (20) page limitation. Any information submitted by respondents to this sources sought notice is totally voluntary and at no cost to the Government. This information will help the Government form its acquisition strategy. All information received in response to this sources sought synopsis that is marked ""Proprietary"" will be handled accordingly. Responses will not be returned nor will receipt be confirmed. No solicitation exists; therefore, do not request a copy of a solicitation. 22. Please provide the following Point of Contact information on all responses: Responses are due no later than 3:00 PM EST (local time at Fort Belvoir, VA) on 06 August 2020. Email responses should not exceed 5 Megabytes (MB). Responses received after this date and time may not be reviewed.� Send responses electronically to: Michael Sampson, Contract Specialist, email: michael.sampson18.civ@mail.mil Sabin A. Joseph, Contracting Officer, email: sabin.a.joseph.civ@mail.mil Sharon Minor, PM GS, 3GEN FLIR COR, email: Sharon.R.Minor.civ@mail.mil Contracting Office Address: Army Contracting Command, APG-Fort Belvoir 10205 Burbeck Road, Bldg 362 Fort Belvoir VA 22060-5811
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/ed19428540b3491a85b466e63e21480c/view)
- Place of Performance
- Address: USA
- Country: USA
- Country: USA
- Record
- SN05712654-F 20200708/200706230152 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |