SOLICITATION NOTICE
78 -- Indoor Gym Equipment
- Notice Date
- 3/14/2019
- Notice Type
- Combine Synopsis/Solicitation
- Contracting Office
- 4745 KNOX STREET, BUILDING 1-1460, Fort Bragg, NC 28310
- ZIP Code
- 22030
- Solicitation Number
- BRAGGSTBARO0001
- Response Due
- 3/20/2019
- Archive Date
- 9/16/2019
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is BRAGGSTBARO0001 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-101. The associated North American Industrial Classification System (NAICS) code for this procurement is 339920 with a small business size standard of 500.00 employees. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2019-03-20 11:30:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be Fort Bragg, NC 28310 The MICC End User requires the following items, Brand Name or Equal, to the following: LI 001: Treadmill: The track sizes range from 55 inches to 60 inches long and then 20 to 22 inches wide. Also have very high weight capacities supporting a 400-pound user and have high max speed ratings of 12 mph. Able to be inclined up to 15% gradient using 0.5% increases. Must have 13 to 16 at least different built-in programs and the console is compatible with third-party apps for both Apple as well as Android.The motors needs to actually work to detect a user ™s weight and then adjust the output of the treadmill based around this. So whether you are 120 pounds or 200 pounds, you ™ll get the same challenge.Lifetime warranty on frame and the cushioning system and at least a 10-year warranty on the motor. Also, it must have a minimum of seven-year warranty on the electrical and mechanical parts along with over one year of labor., 4, EA; LI 002: Dumbbells Iron Grip or equal: Weight:05-50lbs set. Each dumbbell contoured handles that are press fit through each 12-sided solid steel head and then fully welded and then encapsulated in a protective polyurethane helping protect floors and other adjacent strength equipment from impact caused by dropping dumbbells. It must be a one piece construction utilizes no bolts, screws, glue, pins or anything else that has the potential to fail in extreme weightlifting environments., 1, EA; LI 003: Dumbbells Iron Grip or equal: 55-100lbs set. Each dumbbell contoured handles that are press fit through each 12-sided solid steel head and then fully welded and then encapsulated in a protective polyurethane helping protect floors and other adjacent strength equipment from impact caused by dropping dumbbells. It must be a one piece construction utilizes no bolts, screws, glue, pins or anything else that has the potential to fail in extreme weightlifting environments., 1, EA; LI 004: Dumbbells Iron Grip or equal: 105-150lbs set. Each dumbbell contoured handles that are press fit through each 12-sided solid steel head and then fully welded and then encapsulated in a protective polyurethane helping protect floors and other adjacent strength equipment from impact caused by dropping dumbbells. It must be a one piece construction utilizes no bolts, screws, glue, pins or anything else that has the potential to fail in extreme weightlifting environments., 1, EA; LI 005: Abductor/Adductor Machine Legend Fitness 964 or equal: Multiple starting positions for both the inner and outer thigh will accommodate users at all levels. Adjustable back pad, thick padding and dual foot pads provides comfort (black color). Must have at least a 100 lb. weight stack. The majority of the machine needs to be fully welded and assembled in one piece. Weight stack accessible from the exercise position, Seat back adjusts for leg length, Multiple starting positions, 2-position foot bars, Single pop pin switches between exercises, Dimensions (L x W x H): 41" x 59" x 63", Weight Stack: 200 lbs., 1, EA; LI 006: Leg Press Machine Legend Fitness 3308 or equal: The machine has to be fully assembled when delivered. It must have an easy-to-use latch mechanism that will operate independently from one another or locked together. Solid steel rods that provides smoothness and less maintenance over the long haul. Resistance/assistance band hooks allow over speed training and more technique options. Horizontal weight pegs on the foot carriages are easier to load. Easy design that makes it easier to step into and out of the machine. Safety stops are adjustable to six different position in 2-inch increments. Extra-long weight pegs that can hold up to 13 plates on each foot carriage. Must be fully welded and in one piece. Dimensions (L x W x H): 102" X 51" X 67"., 1, EA; LI 007: Decline Press Legend Fitness 6002 or equal: Heavy 11 gauge steel construction. Needs to be fully welded, bolted and assembled. Extra-long weight sleeves for loading up to 9 plates on each side. It must have storage pegs in the back for easy loading and offloading. Closed cell foam handles will not absorb moisture. Bench angles adjustments to 35, 38, 42 and 45 degrees. Seat Adjustments Pop-pin height adjustments to accommodate different size users. Spring Loaded Lever Stops allows for six different handle height settings in 1 increments to accommodate different body sizes, training styles or those with limited range of motion. Spring assisted lever stops insure that handles will not surpass the starting point on the negative which allows safer workouts compared to free weights. Bearings: Heavy-duty pillow block bearings with lubrication nipples insure consistently smooth rotating arms at all times. Finish: Chip resistant powder coat. Dimensions: 62.5 L x 59.25 W x 56.5, 1, EA; LI 008: Incline Press Legend Fitness 6006 or equal: Frame Construction: Heavy 11 gauge steel construction. Needs to be welded and bolted with hardware that meets ANSI B18.3 specifications for maximum stability and longevity. Weight Sleeves: Extra-long for loading up to 9 plates on each side. Handles: Closed cell foam handles will not absorb moisture. Seat Adjustments: Pop-pin height adjustment and back angles in 1 increments to accommodate different size users. Lever Stops: Insures lift-off and re-racking consistency and removes the need for a spotter. Bearings: Heavy-duty pillow block bearings with lubrication nipples insure consistently smooth rotating arms at all times. Assembly: must be fully assembled. Finish: Chip resistant powder coat. Dimensions: 61.25 L x 55 W x 58.5, 1, EA; LI 009: Leg Curl & Extension Combo Legend Fitness 3135 or equal: The machine has to be fully assembled when delivered. Dimensions: 66.5 L x 25 W x 38.5. Frame Construction: Heavy 11 gauge 3 x 3 steel construction. Frame Fabrication: Fully welded frame for maximum stability and longevity. Adjustable Seat: Seat backrest adjusts to an upright position for leg extensions and then drops to a decline angle that promotes proper body alignment for hamstring curls. Bearings: Industrial grade pillow block bearings provide the smoothest movement and longest lasting durability. Weight Peg: Chromed weight peg allows plenty of plate loading for even the strongest lifters. Leg Rollers: Fully upholstered leg rollers utilize thick, dense foam padding that offers maximum support and won ™t deform over time. Handles: Foam rubber stability handles offer a firm grip for additional stability and leverage when seated or lying down. Wearguards: ABS plastic wearguards are located on top of the frame directly underneath the weight peg for frame finish protection from falling weight plates. Padding: 2 thick rebound foam with 8 lb. per cubic foot density. Heavy-duty 32oz top-stitched upholstery is stain resistant and easy to clean. Finish: Chip resistant powder coat., 1, EA; LI 010: Cable Crossover Legend Fitness 954 or equal:The machine has to be fully assembled when delivered. The Adjustable Pulley Cable Crossover starting position goes from the ground to the ceiling in three-inch increments and works over a chrome-plated adjustment tube with laser etched numbers that ensures a smooth movement. Features two 23 position chrome adjustment columns, 4 x 2 tubing and a dual position chin up bar. It Includes: One single grip nylon handle. (2) 150 lbs. weight Stack. Dimensions (L x W x H): 41" X 138" X 90", 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at marketplacesupport@unisonglobal.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or marketplacesupport@unisonglobal.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal. The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions “ Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea. IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management Maintenance Shipping is FOB Destination CONUS (CONtinental U.S.). New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED. Submitted Quotes will be valid for 45 days after the auction closing. This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).). IAW FAR 52.252-2 Clauses Incorporated by Reference, the full text of FAR and DFARS Clauses may be accessed electronically at http://farsite.hill.af.mil; and are current to the most recent revision dates posted on this site. The associated North American Industrial Classification System (NAICS) code for this procurement can be found. The small business size NOTE: THIS NOTICE WAS NOT POSTED TO FEDBIZOPPS ON THE DATE INDICATED IN THE NOTICE ITSELF (14-MAR-2019); HOWEVER, IT DID APPEAR IN THE FEDBIZOPPS FTP FEED ON THIS DATE. PLEASE CONTACT 877-472-3779 or fbo.support@gsa.gov REGARDING THIS ISSUE.
- Web Link
-
Link To Document
(https://www.fbo.gov/notices/8b14a6edac96bca4bd7e0605afb348c8)
- Place of Performance
- Address: Fort Bragg, NC 28310
- Zip Code: 28310
- Country: US
- Zip Code: 28310
- Record
- SN05250206-F 20190316/190314230043 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |