SOLICITATION NOTICE
38 -- LCLS-II Photon Infrastructure CP3B Structural Construction - Package #1
- Notice Date
- 9/24/2018
- Notice Type
- Presolicitation
- NAICS
- 236210
— Industrial Building Construction
- Contracting Office
- Department of Energy, SLAC National Accelerator Lab, SLAC National Accelerator Lab, 2575 Sand Hill Road, Menlo Park, California, 94303, United States
- ZIP Code
- 94303
- Solicitation Number
- RFP_290810_LCLSII_CP3B_Structural
- Archive Date
- 11/3/2018
- Point of Contact
- Alberto Rocha, Phone: 6509262616, Howard J Wilson, Phone: 6509262769
- E-Mail Address
-
albertor@slac.stanford.edu, hwilson@slac.stanford.edu
(albertor@slac.stanford.edu, hwilson@slac.stanford.edu)
- Small Business Set-Aside
- N/A
- Description
- RFP 290810 Section M (Evaluation Factors) RFP 290810 Secton L - Attachment C - SLAC Question and Answer Log RFP 290810 Section L - Attachment B - Price Breakdown Architectural and Structural RFP 290810 Section L - Attachment A - Past Performance Questionnaire RFP 290810 Section L (Instructions to Offerors) RFP 290810 Section K (Form) RFP 290810 Section K (Reps and Certs) RFP 290810 Section J - Attachment 07 Kobe Steel Data RFP 290810 Section J - Attachment 06 Small Business Plan Form RFP 290810 Section J - Attachment 05 Tax Exempt and Resale Certificate RFP 290810 Section J - Attachment 04 SLAC Medical Services RFP 290810 Section J - Attachment 03 SQF Form RFP 290810 Section J - Attachment 02 WSHP Form RFP 2901810 Section J - Attachment 01 Davis Bacon Wage Determination Mod 19 RFP 290810 Section J (List of Attachments) RFP 290810 Section H (Special Ts&Cs) RFP 290810 Section G (FP Construction Terms and Conditions) RFP 290810 Section G (Terms and Conditions) RFP 290810 Section F (Deliveries or Performance) RFP 290810 Section C (Statement of Work) RFP 290810 Section B (Supplies or Services) RFP 290810 Section A (Subcontract Award Form) RFP 290810 Cover Letter This is a Request for Proposal (RFP) for a firm-fixed-price subcontract for the LCLS-II Photon Infrastructure Construction Package #3B Architectural and Structural Project. The Laboratory campus (work site) is located in Menlo Park, California approximately two miles southwest of Stanford University. This is design-bid-build project and the University will be using a best-value trade-off source selection method in accordance with SLAC National Accelerator Laboratory Policies, Procedures and General Terms and Conditions for Fixed-Price Construction Subcontracts. PROJECT OVERVIEW SLAC National Accelerator Laboratory (SLAC) is seeking qualified and experienced Concrete or equivalent subcontractors to perform architectural and structural construction services for the LCLS-II Photon Infrastructure Construction Package 3B Project. The individual awardee shall complete the construction work within the requirements of the Subcontract, on schedule as defined in this Statement of Work. The Awardee is required to coordinate with LCLS-II Field Construction Manager and other Subcontractors working directly in these areas for LCLS-II, and the Subcontractor is required to collaborate with SLAC Management and Technical representatives and other area/site subcontractors to provide the highest quality, sustainable facility for the LCLS-II Project; and meet or exceed the requirements in the Project Construction Package 3B Request for Proposal documents (i.e. procurement subcontract proposal; project specifications; and project drawings). The Awardee will be responsible to provide qualified skilled labor and supervision, services, materials, equipment and tools to meet the requirements of the statement of work. PROJECT SCOPE The Photon Infrastructure Construction Package 3B Project consists of requirements for work within the Linac and Gallery Sectors 11-30 (S11-30); Beam Switchyard (BSY), Beam Transport Hall (BTH); Undulator Hall (UH); Electron Beam Dump (EBD); and Front End Enclosure (FEE) areas of the existing Accelerator, located at SLAC National Accelerator Laboratory, 2575 Sand Hill Road, Menlo Park, CA 94025. ARCHITECTURAL and STRUCTURAL WORK SUMMARY Base Work - EBD : Enlarge the existing Magnet Equipment Pit, Sump Equipment Pit, and Beamline Trenches that connect the Pits together. Includes demolition of concrete facing surfaces and associated rebar. Re-build new facing surfaces with doweled rebar and equal strength concrete to new Pit & Trench dimensions. All demolished materials to be disposed, after SLAC testing and release. Base Work - North and South Research Yards : Supply and Install all New PPS Zone Fencing with the North and South Research yards running parallel to the BTH walls. Includes return fence sections and sections of fencing that are mounted adjacent to the Service Buildings 911 and 913. New fencing is a high grade, heavy gauge metal 8'-0" fence, which requires new footings and access gates as detailed in the Architectural drawings. Fence to have conduit raceways added for SLAC PPS Controls and be properly grounded as shown on Electrical drawings. Base Work - Undulator Hall : Floor modifications: Install additional floor depressions, as shown that match existing depressed areas under South side Undulator stands. Fill portions of existing floor depressions with reinforced grout to allow bearing surface Undulator transport equipment. Bid Option 1 : Architectural/Structural work associated with the Undulator Transport through the BTH North "Plug" Wall. 1) Removal of the existing North "Plug" wall pre-cast concrete panels. Store panels vertically, along exterior of BTH structure, for re-installation. 2) Construct new exterior concrete pad and fabricate & install steel bridge materials for level Undulator transport path from exterior to interior of BTH. 3) After Undulator transport is complete, remove steel bridge materials (return to SLAC); and re-install and seal Plug Wall along with associated weather proof flashing. Bid Option 2 (Photon Systems) : Architectural/Structural work in the Electron Beam Dump (EBD) associated with the Removal/Relocation & Replacement of the Beam Dump Shielding Steel, and Cast in Place Concrete Wall (at FEE wall), and Installation of Interior Pre-Cast Concrete Retaining Wall. SLAC to provide steel shielding, pre-cast concrete, and associated steel support brackets and framework. Contractor to provide the concrete to be poured in step 3. Detail Drawings will be provided later through an amendment. 1) Removal of existing South Dump Shielding Steel plates and storage inside tunnel for re-use. Steel plates that will not be reused to be moved outside the tunnel. 2) Removal of South Dump Concrete material. 3) Install (Pour) concrete shield blocks in place between Pit shielding and FEE Wall. 4) Install steel plate shielding, pre-cast concrete shieling blocks within steel stack, and dumps. Note that some shielding needs to be placed before installing the dumps, then the rest of the shielding is to be installed. 5) Install New Pre-Cast Concrete Plate Retaining Wall with associated steel support brackets and framework. SIGNIFICANT PROJECT NOTES Request for Clarification on the contents of this RFP are to be sent, in writing via email, using Section L, Attachment C, to the attention of the Procurement Specialist no later than October 9, 2018, 5:00 PM (PST) to allow sufficient time provide responses to all Offerors. A Site Visit day has been scheduled for Wednesday, September 26, 2018 at 10:00 AM, meeting will start in Building 052-108 American River Conference Room. Interested parties are invited to submit meeting confirmation and/or any questions (i.e. meeting location) for the subject site visit by September 25, 2018, 4:00 PM to the Procurement Specialist at albertor@slac.stanford.edu Proposals must be received not later than Friday, October 19, 2018, 5:00 PM (PST), and be valid for 120 days from the subject due date. In addition, one electronic (PDF) copy must be submitted by the due date as well. The Project budget falls between $1 to $2 million dollars. Marking of Proprietary/Confidential Information: Offerors shall properly mark and identify with a restrictive legend or information markings on pages of the proposal that contain Proprietary/confidential information. Technical, contractual, and administrative questions should be directed to the undersigned, in writing, at albertor@slac.stanford.edu. The Procurement Representative is the SOLE point of contact. Any communication to any other SLAC employee or contractor is grounds for disqualification. Access to view and download LCLS-II Photon Infrastructure Construction Package #3B Electrical Project drawings and specifications will require a SLAC National Accelerator Laboratory invitation. Please forward the names, titles and email addresses of those who require access to project drawings and specifications to the Procurement Specialist. A Small Business Subcontracting Plan is not required to be provided with the proposal, but will be required prior to Award.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOE/SLAC/STAN/RFP_290810_LCLSII_CP3B_Structural/listing.html)
- Place of Performance
- Address: 2575 San Hill Road, Menlo Park, California, 94025, United States
- Zip Code: 94025
- Zip Code: 94025
- Record
- SN05102105-W 20180926/180924230837-479b117ad0f238a71105dc608d150e58 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |