MODIFICATION
66 -- Formaldehyde Monitor.
- Notice Date
- 9/24/2018
- Notice Type
- Modification/Amendment
- NAICS
- 334516
— Analytical Laboratory Instrument Manufacturing
- Contracting Office
- Department of Commerce, National Institute of Standards and Technology (NIST), Acquisition Management Division, 100 Bureau Drive, Building 301, Room B130, Gaithersburg, Maryland, 20899-1410, United States
- ZIP Code
- 20899-1410
- Solicitation Number
- 1333ND18QNB730463
- Point of Contact
- Mario Gray, Phone: 3019756107
- E-Mail Address
-
mario.gray@nist.gov
(mario.gray@nist.gov)
- Small Business Set-Aside
- Total Small Business
- Description
- Amendment 2: The purpose of this amendment is to remove a specification, incorporate a new specification, revise a specification, extend the due date for quotations, and incorporate a required submission, as follows: The following specification is hereby removed from this requirement in its entirety: The system must not have known interferences with nanoparticles or other chemicals present in indoor air. The following specification is hereby incorporated into this solicitation as a minimum requirement: The unit must have a thermal stabilization system capable of keeping the sampling device or sampling chamber at a constant temperature of +/- 0.02 °C or better. The following specification is hereby revised as follows: From: The accuracy of the system shall be within 1% at full range; To: The accuracy of the system shall be within 1% at full range or the precision of the instrument must be less than 0.5 ppbv at 0.1% of reading The due date for quotations is hereby extended through 4:00 pm eastern time on September 26, 2018. No questions will be accepted. In addition to the submission requirements identified in the solicitation, the contractor must identify the place of origin in which the proposed instrument is manufactured. This solicitation remains a small business set aside, in accordance with the non-manufacturing rule, the contractor shall be a small business under the applicable size standard and shall provide either its own product or that of another domestic small business manufacturing or processing concern. See FAR 19.102(f) for additional information. Any quotations received determined to be non-compliant with the small business set aside and non-manufacturing rule will not be considered for award. All other terms remain unchanged.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOC/NIST/AcAsD/1333ND18QNB730463/listing.html)
- Record
- SN05102037-W 20180926/180924230818-20de6f27ebc54dd20676d263d14498b3 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |