SOLICITATION NOTICE
12 -- Skid Units for UTTR
- Notice Date
- 9/13/2018
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 336120
— Heavy Duty Truck Manufacturing
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, AFLCMC / AFSC / AFNWC - HILL AFB, ., Hill AFB, Utah, 84056, United States
- ZIP Code
- 84056
- Solicitation Number
- F2D0AA8219A101
- Archive Date
- 10/6/2018
- Point of Contact
- Mandi R Johnson, Phone: 8017777522, Richard Jensen, Phone: 801-775-2216
- E-Mail Address
-
mandi.johnson.3@us.af.mil, richard.jensen.5@us.af.mil
(mandi.johnson.3@us.af.mil, richard.jensen.5@us.af.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. Applicable FAR provisions and clauses in effect thru Federal Acquisition Circular (FAC) 2005- 97. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. This solicitation F2D0AA8219A101 is being issued as a Request for Quotation (RFQ) for Hill AFB, Utah. This procurement is a full and open competition for 100% small business set-aside, with a NAICS code of 336120. A single award will be made as a result of evaluation of quotes received. Funds are not presently available for this contract. Award will be made contingent upon the availability of funds. This solicitation may be cancelled at any time without an award being made. The following commercial items are requested in this solicitation; QTY Line Item Description 1 0001 300 Gallon Skid Unit and bed for 1993 Ford F-350 (government vehicle) 1 0001A 300 gallon polypropylene watertank with integral 10gallon foam cell With: Water tank shall be baffled according to NFPA standard One 8.0" round fill tower with incorporated 4.0" vent/overflow pipe and removable screen Liquid level sight gauge located on rear wall of tank 3.0" tank suction with a recessed sump and anti-swirl 1.5" recirculating fitting 1.0" drain fitting 2 auxiliary mounting blocks on top of tank Lifetime warranty 1 0001B Heavy Duty Fire Body constructed of heavy duty extruded Aluminum With: Headache rack at front of fire body, Chassis fuel fill mounted flush in extrusion of the fire body at driver side rear and in a manner to facilitate uninterrupted filling of fuel tank, Mud Flaps behind chassis rear wheels 1 0001C Rear Long tool storage compartments 120"D x 30"W x 5.0" H Between fire body mounting sills with door opening to the rear of apparatus Constructed of.125" aluminum diamond plate 2 0001D Upper body sweep out style compartments, one each side, with two drop down style compartment doors held in open position by steel chains 76"L x 20"D x 24"H With: Compartment door latches D-Ring style twist latches Constructed for.125" aluminum diamond plate 1 0001E Heavy Duty Aluminum Skid With: Water tank mounting supports at 4 corners of water tank to eliminate movement Pump mounting platform integrated into rear (approximately 40"W x 30"D) and 125" diamond overlay Mounted and secured to fire body 1 0001F Stainless steel plumbing system 2.5" welded stainless steel pipe from fire pump to water distribution manifold 4.0" Square Manifold with the following inlets/outlets: 1-2.5" Victaulic fitting for the 2.5" plumbing from the fire pump 1-1.5" 4 bolt flange for rear 1.5" discharge 1-1.5" 4 bolt flange for front 2 whip lines 1-1.5" 4 bolt flange for booster reel 1-1/4" MNPT fitting for manifold drain 1-1"Water tank refill/recirculation line to prevent water/foam solutions from entering water tank when foam being used 1-2.5" Welded steel wire reinforced flexible connection between tank and pump to reduce fire pump vibration 1-2.5" suction intake with swivel connection, rocker lug plug and chain 1 0001G Apparatus Fire Pump Hale HPX200B18 or equal mounted to rear of apparatus With: -Pump engines fuel cell 6 gallons -Pump Operators Panel custom fabricated to include: Master On/Off Power Switch, Push Button Start, Push Button Choke, Throttle Control, Primer Control, One Class 1 2.5" 0-400 Master Discharge Gauge, Fuel Gauge, Low Oil Pressure Warning Light, Foam Injection System Control Head, One 12" LED Panel Light with Shroud 1 0001H Foam Injection System Trident ATP 1.0A Class A Foam or equal 0001I Booster reel capable of holding 100' of 1.0" lightweight booster line With: Push button rewind switch with 40-amp automatic reset circuit breaker One manual rewind crank assembly 1 0001J Reflective striping 4.0" on each side of the chassis body 1 0001K Red/Yellow chevron pattern reflective striping on rear vertical skirt of fire body 1 0002 400 Gallon Skid Unit and bed for 2014 Ford F-550 (government vehicle) 1 0002A 400 gallon polypropylene watertank with integral 10gallon foam cell With: Water tank shall be baffled according to NFPA standard One 8.0" round fill tower with incorporated 4.0" vent/overflow pipe and removable screen Liquid level sight gauge located on rear wall of tank 3.0" tank suction with a recessed sump and anti-swirl 1.5" recirculating fitting 1.0" drain fitting 2 auxiliary mounting blocks on top of tank Lifetime warranty 1 0002B Heavy Duty Fire Body constructed of heavy duty extruded Aluminum With: Headache rack at front of fire body, Chassis fuel fill mounted flush in extrusion of the fire body at driver side rear and in a manner to facilitate uninterrupted filling of fuel tank, Mud Flaps behind chassis rear wheels 1 0002C Rear Long tool storage compartments 120"D x 30"W x 5.0" H Between fire body mounting sills with door opening to the rear of apparatus Constructed of.125" aluminum diamond plate 2 0002D Upper body sweep out style compartments, one each side, with two drop down style compartment doors held in open position by steel chains 76"L x 20"D x 24"H With: Compartment door latches D-Ring style twist latches Constructed for.125" aluminum diamond plate 1 0002E Heavy Duty Aluminum Skid With: Water tank mounting supports at 4 corners of water tank to eliminate movement Pump mounting platform integrated into rear (approximately 40"W x 30"D) and 125" diamond overlay Mounted and secured to fire body 1 0002F Stainless steel plumbing system 2.5" welded stainless steel pipe from fire pump to water distribution manifold 4.0" Square Manifold with the following inlets/outlets: 1-2.5" Victaulic fitting for the 2.5" plumbing from the fire pump 1-1.5" 4 bolt flange for rear 1.5" discharge 1-1.5" 4 bolt flange for front 2 whip lines 1-1.5" 4 bolt flange for booster reel 1-1/4" MNPT fitting for manifold drain 1-1"Water tank refill/recirculation line to prevent water/foam solutions from entering water tank when foam being used 1-2.5" Welded steel wire reinforced flexible connection between tank and pump to reduce fire pump vibration 1-2.5" suction intake with swivel connection, rocker lug plug and chain 1 0002G Apparatus Fire Pump Hale HPX200B18 or equal mounted to rear of apparatus With: -Pump engines fuel cell 6 gallons -Pump Operators Panel custom fabricated to include: Master On/Off Power Switch, Push Button Start, Push Button Choke, Throttle Control, Primer Control, One Class 1 2.5" 0-400 Master Discharge Gauge, Fuel Gauge, Low Oil Pressure Warning Light, Foam Injection System Control Head, One 12" LED Panel Light with Shroud 1 0002H Foam Injection System Trident ATP 1.0A Class A Foam or equal 0002I Booster reel capable of holding 100' of 1.0" lightweight booster line With: Push button rewind switch with 40-amp automatic reset circuit breaker One manual rewind crank assembly 1 0002J Reflective striping 4.0" on each side of the chassis body 1 0002K Red/Yellow chevron pattern reflective striping on rear vertical skirt of fire body 0003 Installation for both Skid Units on each truck. Required Delivery Date: 60 days after date of award F.O.B. Place of Delivery: Utah Test and Training Range (UTTR) Fire Department I-80w Exit 62, 17 miles North Grantsville, Utah 84029 SAM Registered: Yes/No DUNS #:_____________________________________ CAGE #: ____________________________________ TIN: ________________________________________ GSA Contract#:______________________________ Discount Terms: ______________________________ All questions shall be submitted to Contract Specialist 2d Lt Mandi Johnson, mandi.johnson.3@us.af.mil, no later than 2:00PM MDT, 17 September 2018. All firms must be registered in the System for Award Management (SAM) database at www.sam.gov and shall be considered for award. All quotes must be sent to Contract Specialist - 2d Lt Mandi Johnson, mandi.johnson.3@us.af.mil, no later than 3:00PM MDT, 20 September 2018. The following provisions and clauses apply to this acquisition: -FAR 52.204-16, Commercial and Government Entity Code Reporting -FAR 52.204-18, Commercial and Government Entity Code Maintenance -FAR 52.209-7, Information Regarding Responsibility Matters -FAR 52.209-12, Certification Regarding Tax Matters -FAR 52.211-6, Brand Name or Equal -FAR 52.212-1, Instructions to Offerors--Commercial Items -FAR 52.212-2 Evaluation -- Commercial Items (the Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and delivery terms considered). The following factors shall be used to evaluate offers: (i) Technical Capability; (ii) And Price Price, when compared to technical capability is the same in importance Technical capability shall be evaluated on Skid Units containing 300 and 400 gallon each with: Heavy Duty Fire Body constructed of heavy duty extruded Aluminum; Stainless steel plumbing system; Foam Injection System Trident ATP 1.0A Class A Foam or equal; and an Apparatus Fire Pump Hale HPX200B18 or equal mounted to rear of apparatus. Proposals will be evaluated on the basis of pass or fail. Once the proposal is given a pass or fail rating we will award to the lowest price technically passing proposal. -FAR 52.212-3, Offeror Representations and Certifications -- Commercial Items -FAR 52.212-4, Contract Terms and Conditions-Commercial Items -FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders--Commercial Items -FAR 52.222-56, Certification Regarding Trafficking in Persons Compliance Plan -DFARS 252.212-7000 Offeror Representations and Certifications-Commercial Items -DFARS 252-212-7001 Contract Terms and Conditions Required to implement Statutes or Executive Orders applicable to Defense Acquisitions of Commercial Items. Please be advised that this RFQ in no manner obligates the Government regarding award of a contract that results from the issuance of this RFQ.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFMC/OOALC/F2D0AA8219A101/listing.html)
- Place of Performance
- Address: Utah Test and Training Range (UTTR), Fire Department, I-80w Exit 62, 17 miles North, Grantsville, Utah, 84029, United States
- Zip Code: 84029
- Zip Code: 84029
- Record
- SN05087179-W 20180915/180913231019-effec0cef3da9ae5d51465f2e24a0d57 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |