Loren Data's SAM Daily™

FBO DAILY - FEDBIZOPPS ISSUE OF JULY 19, 2018 FBO #6082
DOCUMENT

65 -- 36C25818Q9559 COMPLETE MODUMAX TRIPLE A UNIT - Attachment

Notice Date

7/17/2018
 

Notice Type

Attachment
 

NAICS

339999 — All Other Miscellaneous Manufacturing
 

Contracting Office

Department of Veterans Affairs;NCO 22 - Gilbert;777 E. Missouri, Suite 300;Phoenix AZ 85014
 

ZIP Code

85014
 

Solicitation Number

36C25818Q9559
 

Response Due

7/24/2018
 

Archive Date

9/22/2018
 

Point of Contact

Abdalia "Dale" Smith
 

Small Business Set-Aside

N/A
 

Description

This is NOT a solicitation announcement. This sources sought notice is for information and planning purposes only and shall not be construed as a solicitation or as an obligation on the part of the Department of Veterans Affairs (VA). The purpose of this sources sought is to gain knowledge of potential qualified sources and their size classification relative to NAICS 339999 All Other Miscellaneous Manufacturing (size standard of 500 employees). Responses to this sources sought will be used by the Government to make appropriate acquisition decisions. After review of the responses to this sources sought, a solicitation announcement may be published. Responses to this sources sought synopsis are not considered adequate responses for a solicitation announcement. The Department of Veterans Affairs (VA), VISN 22 Network Contracting Office Gilbert, is seeking sources that can provide an ModuMax Storage System for the New Mexico VA Healthcare System located at 1501 San Pedro Drive SE, Albuquerque, NM 87108. The potential period of performance will be as follows: TBD Statement of Work This requirement is for the transportation, installation, and testing for all listed equipment in the schedule below. Products must meet all salient characteristics defined in that section. Specific Tasks The Contractor shall provide any training or education, required to meet commercial standards related to use of an ModuMax Storage System; additionally, the contractor shall furnish all supplies, equipment, facilities and services required for delivery and installation of the supplies and equipment. New Equipment ONLY; NO remanufactured or "gray market" items. This is a Brand Name on Equal solicitation, products must meet all the salient characteristics listed below. Part numbers refenced in the schedule below are from Distribution Systems International, Inc.; quotes must be for Distribution Systems International, Inc or equal equipment items. Holidays Normal business hours are 8 a.m. to 4:30 p.m., Monday through Friday excluding the following federal holidays: New Year's Day, Martin Luther King Day, President's Day, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans Day, Thanksgiving Day, Christmas, and any other day specifically declared by the President of the United States to be a national holiday. SCHEDULE ITEM INFORMATION ITEM NUMBER DESCRIPTION OF SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT 0001 25.00 EA KIT-D1-MM-KIT3A/8BSK-C MODIMAX TRIPLE A UNIT COMPLETE 0002 50.00 EA D2-4BC 4" clear basket 0003 25.00 EA D2-8BC 8" clear basket 0004 75.00 EA D2-DCA1 MODUMAX DUST COVER FOR TOP OF UNIT - TYPE "A" 0005 75.00 EA D2-VOLKREN MODUMAXVOLKREN WORKTOP - "A" OR :B" UNIT 0006 125.00 EA D2-MLDH MM TOURNE-CLICK HORIZONTAL RUNNER - LEFT - FOR "A" FRAME/"CNTR" STORAGE 0007 125.00 EA D2-MRDH MM TOURNE-CLICK HORIZONTAL RUNNER - RIGHT - FOR "A" FRAME/"CNTR" STORAGE 0008 50.00 EA D2-COLORLABEL-WORD-11-12L 11-12 LETTER WORD ON PART D2-COLORLABEL: 2.5"TALL X 11.75"L 0009 12.00 EA D2-MM-COLORPANEL-FULL/A FULL COLOR PANEL FOR MM "A" UNIT: YELLOW, RED, ORANGE, LT BLUE, DK BLUE, LT GREEN, DK GREEN, PURPLE 0010 16.00 EA KIT-D1-MM-KIT3A/8BSK-C MODUMAX TRIPLE A UNIT COMPLETE 0011 3.00 EA KIT-D1-MM-KIT4A/8BSK-C MODUMAX QUAD A UNIT COMPLETE 0012 1.00 EA KIT-D1-MM-KITA/ST/WIDE MODUMAX STARTER A SINGLE UNIT COMPLETE 0013 11.00 EA KIT-D1-MM-KITA/ADD/WIDE MODUMAX ADDER A SINGLE UNIT COMPLETE 0014 6.00 EA KIT-D1-MM-KIT2A/8BSK-C MODUMAX DOUBLE A UNIT COMPLETE 0015 50.00 EA D2-2TC 2" CLEAR SOLID TRAY ROOM BC-115 STAFF WORK AREA 0016 80.00 EA D2-4BC 4" CLEAR BASKET 0017 50.00 EA 8BC D2-8BC 8" CLEAR BASKET 0018 50.00 EA D2-VOLKREN MODUMAX VOLKREN WORKTOP - "A" OR "B" UNIT 0019 72.00 EA D2-DCA1 MODUMAX DUST COVER FOR TOP OF UNIT- TYPE "A" 0020 12.00 EA D2-DCWA1 MODUMAX DUST COVER FOR TOP OF WIDE UNIT- TYPE "A" 0021 4.00 EA KIT-D1-MM-KITA/ST-1/2VOLKCTSOS MODUMAX STARTER SINGLE UNIT WITH 4 VOLKREN AND 4 CTS-OS SHELVES 0022 9.00 EA KIT-D1-MM-KITA/ADD-1/2VLKCTSOS MODUMAX ADDER SINGLE UNIT WITH 4 VOLKREN AND 4 CTS-OS SHELVES 0023 1.00 EA KIT-D1-MM-KIT4A/8BSK-C MODUMAX QUAD A UNIT COMPLETE - CLEAR 0024 17.00 EA D2-DCA1 MODUMAX DUST COVER FOR TOP OF UNIT- TYPE "A" 0025 25.00 EA D2-VOLKREN MODUMAX VOLKREN WORKTOP - "A" OR "B" UNIT 0026 9.00 EA D2-COLORLABEL-WORD-11-12L 11-12 LETTER WORD ON PART D2-COLORLABEL: 2.5" TALL X 11.75"L 0027 1.00 EA KIT-D1-MM-KIT4A/8BSK-C MODUMAX QUAD A UNIT COMPLETE 0028 1.00 EA KIT-D1-MM-KITA/ST-1/2VOLKCTS MODUMAX STARTER SINGLE UNIT WITH 4 VOLKREN-CNTR AND 4 CTS SHELVES 0029 3.00 EA KIT-D1-MM-KITA/ADD-1/2VLKCTSOS MODUMAX ADDER SINGLE UNIT WITH 4 VOLKREN AND 4 CTS-OS SHELVES 0030 7.00 EA D2-DCA1 MODUMAX DUST COVER FOR TOP OF UNIT- TYPE "A" 0031 4.00 EA D2-DCCTS1 MODUMAX DUST COVER FOR TOP OF CTS UNIT 0032 25.00 EA D2-VOLKREN MODUMAX VOLKREN WORKTOP - "A" OR "B" UNIT 0033 1.00 EA INSTALLATION COMPLETE ONSITE ASSEMBLY AND INSTALLATION Salient Characteristics KIT-D1-MM-KITA/ST-1/2VOLKCTS (LN28) Specifications/Salient Characteristics: Extruded, anodized aluminum frames (48 TOAL HOLES) 2 total frames w/ adder 4 horizontal stabilization brackets aluminum 1 bin adjustments 2 locking casters 2 swivel casers 8 Stainless steel pull out shelf (less wide) 2 heavy duty runners w/ ball bearing slides Runners include magnetic catch to pull shelf in Retaining Walls -  1 rear and side retaining walls on the trays ensure product will remain in place while trays are opened and closed. Pull Handle -  Trays have full length pull handles allowing for easy access to product. Trays have powder coated solid galvanized surface. Full Extensions -  Heavy duty ball bearing glides 5 extend 110% allowing access to the entire tray when completely pulled out. Runners will automatically pull themselves back in the last 1 1/2 inches. Load capacity is 45 lbs. per shelf. Dust Cover made from anodized aluminum KIT-D1-MM-KITA/ADD-1/2VOLKCTS (LN29) Specifications/Salient Characteristics: Extruded, anodized aluminum frames (48 TOAL HOLES) 2 total frames w/ adder 4 horizontal stabilization brackets aluminum 1 bin adjustments 2 locking casters 2 swivel casers 8 Stainless steel pull out shelf (less wide) 2 heavy duty runners w/ ball bearing slides Runners include magnetic catch to pull shelf in Retaining Walls -  1 rear and side retaining walls on the trays ensure product will remain in place while trays are opened and closed. Pull Handle -  Trays have full length pull handles allowing for easy access to product. Trays have powder coated solid galvanized surface. Full Extensions -  Heavy duty ball bearing glides 5 extend 110% allowing access to the entire tray when completely pulled out. Runners will automatically pull themselves back in the last 1 1/2 inches. Load capacity is 45 lbs. per shelf. Dust Cover made from anodized aluminum D2-COLORLABEL-WORD-11-12L (LN8) Specifications/Salient Characteristics: 6-10 Letter options lettering for labeling Color options available to customer Customer specifies custom labeling preference after PO is received approval needed before manufacturing 2.5 Tall x 11.5 Length Acrylic 1 per shelving section included D2-MM-COLORPANEL-FULL/A (LN9) 11-12 Letter word on each Color options available to customer Customer specifies custom labeling preference after PO is received approval needed before manufacturing Full Length and Width of MM A frame Acrylic KIT-D1-MM-KIT3A/8BSK-C (LN10) Triple mobile unit complete Approximate Height: 77.25 Approximate Width: 36.5 Approximate Depth: 25.4 Extruded, anodized aluminum frames 8 horizontal stabilization brackets 1 bin adjustments Locking casters Clear baskets 2, 4, 8, 11   Clear solid  bins 2, 4 Clear long & Short Dividers The information identified above is intended to be descriptive, not restrictive and to indicate the quality of the supplies/services that will be satisfactory. It is the responsibility of the interested source to demonstrate to the government that the interested parties can provide the supplies/services that fulfill the required specifications. If you are interested, and are capable of providing the sought-out supplies/services, please provide the requested information as well as the information indicated below. Response to this notice should include company name, address, point of contact, size of business pursuant to the following questions: (1) Please indicate the size status and representations of your business, such as but not limited to: Service Disabled Veteran Owned Small Business (SDVOSB), Veteran Owned Small Business (VOSB), Hubzone, Woman Owned Small Business (WOSB), Large Business, etc. (2) Is your company considered small under the NAICS code identified under this source sought announcement? (3) Are you the manufacturer or distributor of the items being referenced above? What is the manufacturing country of origin of these items? (4) If you re a small business and you are an authorized distributor/reseller for the items identified above, do you alter; assemble; modify; the items requested in any way? If you do, state how and what is altered; assembled; modified? (5) Does your company have a Federal Supply Schedule (FSS) contract with General Services Administration (GSA) or the National Acquisition Center (NAC) or are you a contract holder with NASA SEWP (National Aeronautics and Space Administration / Solutions for Enterprise-Wide Procurement) or any other federal contract? If so, please provide the contract type and number. (6) If you are an FSS GSA/NAC or NASA SEWP contract holder or other federal contract holder, are the referenced items/solutions available on your schedule/contract? (7) Please provide general pricing for your products/solutions for market research purposes. (8) Please submit your capabilities in regards to the salient characteristics being provided for planning purposes. *** Submissions addressing Section (8) should show clear, compelling and convincing*** evidence that all equal to items" meet all required salient characteristics. Responses to this notice shall be submitted via email to abdalia.smith@va.gov. Telephone responses will not be accepted. Responses must be received no later than Tuesday, July 24, 2018 at 4 PM PST. If a solicitation is issued it shall be announced at a later date, and all interested parties must respond to that solicitation announcement separately from the responses to this request for information. Responses to this notice are not a request to be added to a prospective bidders list or to receive a copy of the solicitation.
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/spg/VA/PhVAMC/HMC/36C25818Q9559/listing.html)
 

Document(s)

Attachment
 

File Name: 36C25818Q9559 36C25818Q9559.docx (https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=4489418&FileName=36C25818Q9559-000.docx)

Link: https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=4489418&FileName=36C25818Q9559-000.docx

 

Note: If links are broken, refer to Point of Contact above or contact the FBO Help Desk at 877-472-3779.
 

Record

SN04994542-W 20180719/180717230852-df662d431ed7b8068fe87285cd8672a0 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |