Loren Data's FBO Daily™

fbodaily.com
Home Today's FBO Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY - FEDBIZOPPS ISSUE OF MARCH 09, 2018 FBO #5950
SOLICITATION NOTICE

Z -- Piegan/Raymond IFR Remediation - Solicitation

Notice Date
3/7/2018
 
Notice Type
Combined Synopsis/Solicitation
 
NAICS
562910 — Remediation Services
 
Contracting Office
General Services Administration, Public Buildings Service (PBS), R8 Rocky Mtn Region Acquisition Division (47PJ00), One Denver Federal Center, Building 41, P.O. Box 25546, Denver, Colorado, 80225-0546, United States
 
ZIP Code
80225-0546
 
Solicitation Number
47PJ0018R0079
 
Archive Date
4/30/2018
 
Point of Contact
Monique Brumley, Phone: 7202156923, Miriam Babcock, Phone: 303-236-2089
 
E-Mail Address
monique.brumley@gsa.gov, miriam.babcock@gsa.gov
(monique.brumley@gsa.gov, miriam.babcock@gsa.gov)
 
Small Business Set-Aside
Total Small Business
 
Description
wage determination Piegan SOW Raymond SOW Piegan Piegan wage determination Clauses Piegan Report Raymond Report 1442 Raymond- The General Services Administration, Region 8, is initiating a project to clean all the supporting rooms adjacent to the indoor firing range in Raymond, MT. Work is to include lead dust remediation cleaning of all supporting equipment, HVAC supply and return ducts and diffusers, building finishes, equipment, surfaces throughout the identified spaces. Please reference Pinyon Environmental, Inc. October 15, 2016 Lead Dust Evaluation Raymond LPOE for detailed description of locations and procedures. Piegan- The General Services Administration (GSA), Region 8, is initiating a project to decontaminate areas where lead dust contamination has been identified within the Indoor Firing Range (IFR), firing range building and one area of an adjacent building at the Piegan Land Port of Entry in Babb, MT. Third party clearance testing shall be required and is included in a separate scope of work. The work specified herein is lead dust decontamination which is to be performed by competent persons trained, knowledgeable and qualified in the techniques of lead dust decontamination, in lead-safe work practices, and in the handling and disposal of lead contaminated materials. The Contractor performing this work MUST be familiar with all applicable regulations covering this scope of work. This includes all permits, licenses, and certificates required to perform this type of hazardous work and related disposal requirements. The Contractor shall supply all labor, materials, services and equipment to complete the work in accordance with all applicable federal, state and local regulations. GSA has included recommended personal protective equipment (PPE) and work methods as part of this work scope; however, it is incumbent on the Contractor's Occupational Safety and Health Administration (OSHA) defined Competent Person to make a final determination on the required level of PPE, work methods, and controls necessary to ensure the safety of their employees, including any respiratory protection and exposure and/or air monitoring, to prevent contamination and protect workers. The contractor performing the work must follow all applicable federal, state and local regulations, including but not limited to: OSHA Lead in Construction Regulations 29 CFR 1926.62 OSHA General Industry- Lead 29 CFR 1910.1025 OSHA Hazardous Waste Operations and Emergency Response 29 CFR 1910.120 OSHA Respiratory Protection 29 CFR 1910.134 U.S. EPA RCRA Hazardous Waste Regulations 40 CFR Parts 260 through 299 U.S. DOT Hazardous Materials Regulations 49 CFR Parts 171 through 180) Montana Hazardous Waste Act MCA 75-10-401 Montana Hazardous Waste Regulations ARM 17.53 All activities shall be performed by individuals with appropriate levels of OSHA lead awareness and hazard communication training and shall be supervised by the Contractor’s Competent Person on the job site at all times. All work shall comply with codes and standards applicable to each type of work through the course of this project. Contractor shall also comply with the requirements of GSA BuildGreen Standards and the PBS P100. The Contractor is responsible for verification of all field conditions affecting performance of the work as described in this scope in accordance with OSHA, EPA, DOT and State of Montana standards and regulations. Compliance with applicable requirements is solely the responsibility of the Contractor. Deviations from this work plan require prior written approval from GSA.
 
Web Link
FBO.gov Permalink
(https://www.fbo.gov/spg/GSA/PBS/8PT/47PJ0018R0079/listing.html)
 
Place of Performance
Address: CBP Raymond Firing Range, Raymond MT, 59526 and CBP Piegan Firing Range, Babb MT, 59411, United States
Zip Code: 59411
 
Record
SN04846207-W 20180309/180307231659-5b79e22d94507016c07ab4bb33a41e0c (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  © 1994-2016, Loren Data Corp.