Loren Data's FBO Daily™

fbodaily.com
Home Today's FBO Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY - FEDBIZOPPS ISSUE OF MARCH 09, 2018 FBO #5950
MODIFICATION

95 -- CUSTOM MACHINED PARTS

Notice Date
3/7/2018
 
Notice Type
Modification/Amendment
 
NAICS
332999 — All Other Miscellaneous Fabricated Metal Product Manufacturing
 
Contracting Office
Department of the Navy, Office of Naval Research, Naval Research Laboratory/Supply, 4555 Overlook Ave S.W., Washington, District of Columbia, 20375
 
ZIP Code
20375
 
Solicitation Number
N00173-18-Q-0176
 
Archive Date
3/24/2018
 
Point of Contact
HECTOR ANDRADEDIAZ, Phone: 202-767-2022, Michelle R. Waters, Phone: 2027672243
 
E-Mail Address
hector.andradediaz@nrl.navy.mil, michelle.waters@nrl.navy.mil
(hector.andradediaz@nrl.navy.mil, michelle.waters@nrl.navy.mil)
 
Small Business Set-Aside
Total Small Business
 
Description
The following questions were asked: Question #1) For all four Shear Stringers 5763LP09-1, 2, 3 & 4, can the.88 Leg have the same 9.74 radius as the main section, keeping the same 8.23 width? A- The.88 leg should be flat, as we use that flatness to engage a shim during assembly to assure proper placement. Question #2) For all four Shear Stringers 5763LP09-1, 2, 3 & 4, and Connector Plate Doubler 5763LP40, can the parts be drilled or punched while flat, then rolled, resulting in slight hole deformation. A- The curve is sufficiently large that the resulting hole/feature deformation will not impact function. Yes, parts may be drilled/punched as needed to meet the drawing requirements while flat, as long as the position (principally the radial positioning) is accurate after rolling. Longitudinal position should be unaffected by that process. Question #3) For the Longeron 5763LP05-A&B, can the 8.7 radius legs be “bump bent”? The radius would be mimicked by bump bends / kinks. Forming these as per drawing would require a disposable dieset worth 3 to $4000.00. A- Due to the existing structure to which these parts attach, we need a continuous curve contact to assure design strength is achieved after assembly. In this case, we need a smooth bend, please.
 
Web Link
FBO.gov Permalink
(https://www.fbo.gov/spg/DON/ONR/3400/N00173-18-Q-0176/listing.html)
 
Place of Performance
Address: NAVY RESEARCH LABORATORY, 4555 OVERLOOK AVE, SW, WASHINGTON, District of Columbia, 20375, United States
Zip Code: 20375
 
Record
SN04846012-W 20180309/180307231529-5d91540cd09c17ac0b5584420a8c91e5 (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  © 1994-2016, Loren Data Corp.