SOLICITATION NOTICE
78 -- Fitness Equipment
- Notice Date
- 2/8/2018
- Notice Type
- Combined Synopsis/Solicitation
- Contracting Office
- 6130 Edwards St, Fort Sill, OK 73503
- ZIP Code
- 73503
- Solicitation Number
- SILL434KJR0007
- Response Due
- 2/22/2018
- Archive Date
- 8/21/2018
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is SILL434KJR0007 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-96. The associated North American Industrial Classification System (NAICS) code for this procurement is 339920 with a small business size standard of 500.00 employees. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2018-02-22 12:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be FT. SILL, OK 73503 The MICC End User requires the following items, Brand Name or Equal, to the following: LI 001: All two (2) bumper plates shall be of the same make and model and have similar characteristics to Rouge HG 2.0 Bumper Plates: 1. Shall have a diameter of: 450mm / 17.72 inches (IWF Standard) 2. Shall have Collar Openings of: 50.40mm / 1.98 inches 3. Shall have Stainless Steel Inserts 4. Shall have a Weight Tolerance: +/- 1% of claimed weight 5. Shall have a minimal bounce 6. Shall be 10LBs in weight, 2, EA; LI 002: All two (2) bumper plates shall be of the same make and model and have similar characteristics to Rouge HG 2.0 Bumper Plates: 1. Shall have a diameter of: 450mm / 17.72 inches (IWF Standard) 2. Shall have Collar Openings of: 50.40mm / 1.98 inches 3. Shall have Stainless Steel Inserts 4. Shall have a Weight Tolerance: +/- 1% of claimed weight 5. Shall have a minimal bounce 6. Shall be 15LBs in weight, 2, EA; LI 003: All three (3) bumper plates shall be of the same make and model and have similar characteristics to Rouge HG 2.0 Bumper Plates: 1. Shall have a diameter of: 450mm / 17.72 inches (IWF Standard) 2. Shall have Collar Openings of: 50.40mm / 1.98 inches 3. Shall have Stainless Steel Inserts 4. Shall have a Weight Tolerance: +/- 1% of claimed weight 5. Shall have a minimal bounce 6. Shall be 25LBs in weight, 3, EA; LI 004: All three (3) bumper plates shall be of the same make and model and have similar characteristics to Rouge HG 2.0 Bumper Plates: 1. Shall have a diameter of: 450mm / 17.72 inches (IWF Standard) 2. Shall have Collar Openings of: 50.40mm / 1.98 inches 3. Shall have Stainless Steel Inserts 4. Shall have a Weight Tolerance: +/- 1% of claimed weight 5. Shall have a minimal bounce 6. Shall be 35Bs in weight, 3, EA; LI 005: All six (6) bumper plates shall be of the same make and model and have similar characteristics to Rouge HG 2.0 Bumper Plates: 1. Shall have a diameter of: 450mm / 17.72 inches (IWF Standard) 2. Shall have Collar Openings of: 50.40mm / 1.98 inches 3. Shall have Stainless Steel Inserts 4. Shall have a Weight Tolerance: +/- 1% of claimed weight 5. Shall have a minimal bounce 6. Shall be 45LBs in weight, 6, EA; LI 006: All one (1) women s barbell shall be of the same make and model and have similar characteristics to Rouge Bella Bar 2.0: 1. Shall have a weight of 15KG 2. Shall have diameter of 25MM 3. Shall have an Olympic knurl 4. Shall have dual knurl marks 5. Shall have no center knurl 6. Shall have a black zinc shaft coating 7. Shall have a loadable sleeve length of 13.00 8. Shall have a sleeve coating of bright zinc 9. Shall have a tensile strength of 190,000 PSI, 1, EA; LI 007: All three (3) technique bars shall be of the same make and model and have similar characteristics to Rogue T-15LB Technique Bar: 1. Shall be silver in color 2. Shall be a Junior bar type 3. Shall have a weight of 15LB 4. Shall have 5 level multi-function control and seat slider 5. Shall have titanium finish arms and frame 6. Shall have breathable mesh fabric back with built-in lumbar sup port, 3, EA; LI 008: All five (5) echo bar shall be of the same make and model and have similar characteristics to 28.5mm Rogue Echo Bar: 1. Shall be silver in color 2. Shall have a weight of 20KG 3. Shall have diameter of 28.5mm 4. Shall have dual knurl marks 5. Shall have no center knurl 6. Shall have a bright zinc shaft coating 7. Shall have a loadable sleeve length of 16.40" 8. Shall have a sleeve coating of bright zinc 9. Shall have a tensile strength of 190,000 PSI, 5, EA; LI 009: All six (6) wood rings shall be of the same make and model and have similar characteristics to Rogue Wood Rings: 1. Shall have a weight of 4lbs 2. Shall have a diameter of 1.25" 3. Shall have a heavy duty nylon straps with buckle system 4. Shall be black color 5. Shall have velcro fasteners, 6, EA; LI 010: All five (5) medicine balls shall be of the same make and model and have similar characteristics to Rogue Medball 14lbs: 1. Shall be black in color 2. Shall have diameter of 14" 3. Shall have a double-stitched nylon threading built 4. Shall have a weight of 14lbs, 5, EA; LI 011: All five (5) medicine balls shall be of the same make and model and have similar characteristics to Rogue Medball 20lbs: 1. Shall be black in color 2. Shall have diameter of 14" 3. Shall have a double-stitched nylon threading built 4. Shall have a weight of 20lbs, 5, EA; LI 012: All one (1) weight bench shall be of the same make and model and have similar characteristics to Rogue Monster Westside Bench (Satin Black)- Standard Pad: 1. Shall be black in color 2. Shall have a weight of 342 lbs 3. Shall have a height of 54.75" 4. Shall have a foot print of 53" x 34" 5. Shall have a bench height of 17.75 with fat pad (adjustable up and down by 2" increments) 6. Shall have a laser-cut rogue side panels with red powder coat finish 7. Shall have a monster sandwich J-cups to protect the bar knurl (standard J-cups) 8. Shall have 4 adjustable monster pins with protective plastic 9. Shall have a finish satin black powder coat, 1, EA; LI 013: All two (2) adjustable bench shall be of the same make and model and have similar characteristics to Rogue adjustable bench 2.0: 1. Shall be black in color 2. Shall have six (6) adjustment positions 0-85 degrees 3. Shall have a pad height of 17.5" 4. Shall have a pad width of 11.25" 5. Shall have a overall pad length of 52" 6. Shall have two (2) seat position flat or upward angle 7. Shall have wheels and plastic lined handle for mobility 8. Shall have rubber caps on legs to prevent sliding to protect floor, 2, EA; LI 014: All five (5) utility bench shall be of the same make and model and have similar characteristics to Rogue Utility Bench 2.0 (w/ rubber feet): 1. Shall be black in color 2. Shall have a length of 47" 3. Shall have a width of 14" 4. Shall have a height of 18" 5. Shall have a steel note of 2" x 3" (11-gauge steel) 6. Shall have a foot print of 48" x 14" 7. Shall have a pad width of 12" 8. Shall have a pad thickness of 2-1/4" 9. Shall have rubber feet 10. Shall have a single piece steel frame 11. Shall have a angled profile for stability, 5, EA; LI 015: All one (1) power rack shall be of the same make and model and have similar characteristics to Rogue RML-690 Power Rack (MG Satin Black): 1. Shall be black in color 2. Shall have a weight of 530lbs 3. Shall have a length of 76" 4. Shall have a width of 49" 5. Shall have a height of 90 3/8" 6. Shall have a steel notes of 3 x 3" (11-gauge, west side hole spacing) 7. Shall have a foot print of 80" x 53" 8. Shall have a 43" single pullup bar 9. Shall have a 43" fat/skinny bar 10. Shall have storage pegs 11. Shall have pin pipe safeties, 1, EA; LI 016: All three (3) squat stand shall be of the same make and model and have similar characteristics to Rogue S-1 Squat Stand 2.0: 1. Shall have a height of 72 2. Shall have a foot print of 48"x48 3. Shall have a weight capacity of 1,000 + lbs 4. Shall have a 2x3 11-gauge steel 5. Shall have a west side hole pattern 1 through bench and clean pull zone, 2 spacing above and below 6. Shall have a redesigned base with Triangle Plates 7. Shall have a J-cup with UHMW plastic liner, 3, EA; LI 017: All three (3) Kettlebells shall be of the same make and model and have similar characteristics to Rogue 18LB Rogue Kettlebell: 1. Shall be the color Black 2. Shall be 18LB 3. The Length varies by weight 4. The Width varies by weight 5. The Height varies by weight 6. Shall be Matte black powder coat finish with color coded handles 7. Shall have a Handle Diameter of 1.2", 1.4", 1.5" or 1.58" depending on weight, 3, EA; LI 018: All four (4) Kettlebells shall be of the same make and model and have similar characteristics to Rogue 26LB Rogue Kettlebell: 1. Shall be the color Black 2. Shall be 26LB 3. The Length varies by weight 4. The Width varies by weight 5. The Height varies by weight 6. Shall be Matte black powder coat finish with color coded handles 7. Shall have a Handle Diameter of 1.2", 1.4", 1.5" or 1.58" depending on weight, 4, EA; LI 019: All four (4) Kettlebells shall be of the same make and model and have similar characteristics to Rogue 35LB Rogue Kettlebell: 1. Shall be the color Black 2. Shall be 35LB 3. The Length varies by weight 4. The Width varies by weight 5. The Height varies by weight 6. Shall be Matte black powder coat finish with color coded handles 7. Shall have a Handle Diameter of 1.2", 1.4", 1.5" or 1.58" depending on weight, 4, EA; LI 020: All two (2) Kettlebells shall be of the same make and model and have similar characteristics to Rogue 44LB Rogue Kettlebell: 1. Shall be the color Black 2. Shall be 44LB 3. The Length varies by weight 4. The Width varies by weight 5. The Height varies by weight 6. Shall be Matte black powder coat finish with color coded handles 7. Shall have a Handle Diameter of 1.2", 1.4", 1.5" or 1.58" depending on weight, 2, EA; LI 021: All two (2) Kettlebells shall be of the same make and model and have similar characteristics to Rogue 55LB Rogue Kettlebell: 1. Shall be the color Black 2. Shall be 55LB 3. The Length varies by weight 4. The Width varies by weight 5. The Height varies by weight 6. Shall be Matte black powder coat finish with color coded handles 7. Shall have a Handle Diameter of 1.2", 1.4", 1.5" or 1.58" depending on weight, 2, EA; LI 022: All five (5) Bushing Speed Ropes shall be of the same make and model and have similar characteristics to Rogue SR-3 Rogue Rushing Speed Rope: 1. Shall have a Bushing Design 2. Shall have 11' cables available for taller athletes. 3. Shall have a handle length of 6.75" 4. Shall have a cable of 120" Red Coated 3/32" speed cable 5. Shall have an adjustable end with a fixed swaged end 6. Shall have an indestructible Glass-Filled Nylon Resin Rogue Handgrip 7. Shall have a tapered handle, 1/2" spindle to 7/8" diameter base 8. Recommend use on rubber or nonabrasive surface 9. Recommend 2.3mm - Standard speed rope cable 10. Recommend the 2.3mm Adjustable Screws, 5, EA; LI 023: All six (6) 20 /24 /30 Game Box Joint shall be of the same make and model and have similar characteristics to Rogue 20 /24 /30 Game Box Joint: 1. Shall have CNC Machining 2. Shall have Pocket screws and fasteners 3. Shall have a weight of 56lbs 4. Shall have height options of 20 , 24 , 30 5. All edges are rounded over for safety, 6, EA; LI 024: All one (1) Concept 2 Wall Mounted Ski Erg with PM5 and Concept 2 Ski Erg Floor V2 Stand shall be of the same make and model and have similar characteristics to Rogue Concept 2 Wall Mounted Ski Erg with PM5 and Concept 2 Ski Erg Floor Stand V2 Stand: 1. Shall be Black 2. Shall be the weight of 46LB (SkiErg); 35LB (Floor Stand) 3. Shall have the length of 52" 4. Shall have the width of 24" 5. Shall have a height of 85" 6. Shall have a Material Type Powder-Coat Finish, 1, EA; LI 025: All six (6) Abmats shall be of the same make and model and have similar characteristics to Rogue Abmat: 1. Shall have dimensions: 15 L x 12 W x 2-1/2 H 2. Shall be one Size Fits All 3. Shall have easy Portability / No Set-Up 4. Shall have low compression set foam and durable vinyl construction 5. Shall have stable positioning on almost any surface 6. Shall have contoured design for optimal comfort and range of motion on crunches, sit-ups, and other similar exercises 7. Shall be the color black w/ Rogue logo in Red, 6, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal. The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea. IAW FAR 52.212-2; Evaluation - Commercial Items, the following factor shall be used to evaluate offers: Price. IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management Maintenance Shipping is FOB Destination CONUS (CONtinental U.S.). New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED. Submitted Quotes will be valid for 45 days after the auction closing. No multiple awards will be made. Quotes received through FedBid will be evaluated and awarded on an all-or-nothing basis. This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).). IAW FAR 52.252-2 Clauses Incorporated by Reference, the full text of FAR and DFARS Clauses may be accessed electronically at http://farsite.hill.af.mil; and are current to the most recent revision dates posted on this site. The associated North American Industrial Classification System (NAICS) code for this procurement can be found. The small business size standard for that NAICS code can be found at https://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf "AMC-Level Protest Program If you have complaints about this procurement, it is preferable that you first attempt to resolve those concerns with the responsible contracting officer. However, you can also protest to Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 20 working days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. All other agency-level protests should be sent to the contracting officer for resolution. Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 Packages sent by FedEx or UPS should be addressed to: Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 The AMC-Level Protest procedures are found at: http://www.amc.army.mil/pa/COMMANDCOUNSEL.asp. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures." "52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006, Prohibition On Storage And Disposal Of Toxic And Hazardous Materials; 252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material inspection and receiving report" Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law. Wide Area WorkFlow Payment Instructions 252.204-7012 Safeguarding of Unclassified Controlled Technical Information All deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E. This is currently an unfunded requirement with a high expectation that funds will be available. When and if funds become available a contract will be awarded at that time. Please address your questions through the FedBid buy. If your questions are not being answered in a timely manner, please send your question to the S2P2 Contracting Officer - usarmy.drum.acc-micc.mbx.micc@mail.mil or call 315-772-5582.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/98193a52e666de0e8e0319651cc50059)
- Place of Performance
- Address: FT. SILL, OK 73503
- Zip Code: 73503
- Zip Code: 73503
- Record
- SN04816847-W 20180210/180208231340-98193a52e666de0e8e0319651cc50059 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |