SOLICITATION NOTICE
84 -- 1/3 ABCT Retention Items
- Notice Date
- 6/15/2017
- Notice Type
- Combined Synopsis/Solicitation
- Contracting Office
- 976 William H. WIlson Ave. Suite 100, Ft Stewart, GA 31315
- ZIP Code
- 31315
- Solicitation Number
- W9124M-07-Q-WG08
- Response Due
- 7/13/2017
- Archive Date
- 1/9/2018
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is W9124M-07-Q-WG08 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-95. The associated North American Industrial Classification System (NAICS) code for this procurement is 339940 with a small business size standard of 500.00 employees. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2017-07-13 16:30:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be Fort Stewart, GA 31314 The MICC Fort Stewart requires the following items, Brand Name or Equal, to the following: LI 001: Coyote Brown Backpack: Constructed of heavy duty 600D polyester in coyote brown color sized at 15x21x8 inches. Has a capacity up to 64 liters. Has oversized heavy duty zippers and tabs. Main compartment has multiple gear pouches and molle compatibility. Main compartment expands an additional 5 inches to accommodate extra gear. Side parachute buckles allow tightening to provide compact easy transportation. Smaller pocket on the rear contains an organizer pocket and the main compartment has straps for laptop storage. Bag is water resistant and weighs approximately 2.6 lbs. Logo per associated graphic attached to Solicitation., 263, EA; LI 002: Coyote Giant Duffel: Bag is made of 600D polyester, coyote brown in color and sized at 31x15x15 inches. Construction includes heavy duty backpack straps that can be hidden/stowed. Has a zippered front pocket with handles on both ends. The main compartment has a large U shaped opening for easy access to gear. Comes with custom embroidered logo artwork using a tone on tone threat to match the color of the material (per associated graphic attached to Solicitation)., 250, EA; LI 003: Under Armour T-Shirt: Custom printed logo heat sealed and applied at the factory with color custom artwork (Per graphic attached to Solicitation). Shirt is black under armor brand locker room tech model tee shirt. Constructed of 100% polyester moisture wicking material. Has a 1x1 inch rib detailing color, raglan construction and cover stitched seams for comfort and mobility with anti-odor technology., 279, EA; LI 004: Realtree Xtra Pattern Baseball Style Hat: Hat is the Realtree Xtra pattern baseball style hat. Hat is custom built made of 6 panels consisting of a cotton and polyester blend. Hat comes either unstructured or structured in a low or mid profile. Choice of back closure (Velcro, snap, buckle). Will be embroidered on front 2 panels with tone on tone custom art work and embroidered on the back with text (Per graphic attached to Solicitation)., 156, EA; LI 005: Certificate Folders: Custom padded 2 sided certificate holder with 8 Castillian corner pockets. Overall size is 9x11.5 inches. Landscape opening designed to hold two 8.5x11 certificates or awards while adding protection. Custom artwork logo is hot foil stamped on the front cover, up to 24 inch square (Per graphic attached to Solicitation)., 429, EA; LI 006: Zip Up Poncho Liner: Custom made OCP pattern poncho liner with 12x20 inch pillow generously stuffed with soft fill and carry bag (matching color), embroidered in tone on tone color with custom artwork on the poncho liner bag (Per graphic attached to Solicitation). The poncho liner is 80x80 inches. The poncho liner outer shell is 100% polyester and the inside batting is 100% polyester., 102, EA; LI 007: Hygiene Kit 1-64: Bag is made of 600D polyester, sized at 10x10x5 inches with zippered outside pocket on front. Contains metal hook on inside for hanging the kit. Has a mesh zippered pocket inside the front flap of the main compartment for delicate items. Has a reinforced handle for carrying the bag. Large zippered pocket on the bottom that is water resistant and big enough to accommodate shampoo bottled, baby wipes, or medical supplies that must stay dry. Comes with custom embroidered tone on tone logon on large front flag., 48, EA; LI 008: Tactical Molle Patrol Pack 2-7 IN: The bag is constructed of heavy duty 100D polyester in OCP patter. Has an internal capacity of 27 liters. Has passed back and shoulder straps. Has a padded main compartment for tablet or laptop storage. Has administrative organizer, multiple pockets, pen slots and padded hydration compartment behind the hardened back. Has a Velcro patch on from for a custom patch. Has numerous molle configurations for customizing the bag. Bag will come with 2x3 inch custom embroidered artwork Velcro patch in tone on tone colors., 54, EA; LI 009: 2'x3' Digital Printed Flags 2-7 IN: A custom 2x3 foot printed flag on 200D nylon with a canvas header. Flag is intended to be used indoors and outdoors. Heavy duty nylon material formulated to withstand years of wear and tear. Printed with UV protected ink. The flag will have a white background with the logo imprinted on both sides with the custom logo in correct full color art work., 25, EA; LI 010: Zorrel Z100 Tee Shirts 3-69 Armor Regiment: Custom coyote brown Zorrel z100 t shirt sized from M-XL. Contains a 3 color logo custom artwork at 1 location on the left chest (3-69 Armor Regiment). Constructed of 70% cotton and 30% polyester with a weight of 190gsm / 5.6 oz. Constructed of a moisture management material and a UPF rating of 30+. Shirt must resist shrinkage and retain its colors. Must come with permanent anti odor treatment., 90, EA; LI 011: Zorrel Z100 Tee Shirts 5-7 CAV: Custom coyote brown Zorrel z100 t shirt sized from M-XL. Contains a 3 color logo custom artwork at 1 location on the left chest (5-7 Cavalry Regiment). Constructed of 70% cotton and 30% polyester with a weight of 190gsm / 5.6 oz. Constructed of a moisture management material and a UPF rating of 30+. Shirt must resist shrinkage and retain its colors. Must come with permanent anti odor treatment., 90, EA; LI 012: Zorrel Z100 Tee Shirts 3 BSB: Custom coyote brown Zorrel z100 t shirt sized from M-XL. Contains a 3 color logo custom artwork at 1 location on the left chest (3rd Brigade Support Battalion). Constructed of 70% cotton and 30% polyester with a weight of 190gsm / 5.6 oz. Constructed of a moisture management material and a UPF rating of 30+. Shirt must resist shrinkage and retain its colors. Must come with permanent anti odor treatment., 90, EA; LI 013: Zorrel Z100 Tee Shirts 10 ENG: Custom coyote brown Zorrel z100 t shirt sized from M-XL. Contains a 3 color logo custom artwork at 1 location on the left chest (10th Engineer Battalion). Constructed of 70% cotton and 30% polyester with a weight of 190gsm / 5.6 oz. Constructed of a moisture management material and a UPF rating of 30+. Shirt must resist shrinkage and retain its colors. Must come with permanent anti odor treatment., 90, EA; LI 014: Decal 5-7 CAV: Decal is a custom 3x4 inch high resolution full color decal on white polyester backing. Permanent adhesive for secure mounting. Decal is digitally printed with matching PMS colors to match custom logo artwork and Army specifications., 150, EA; LI 015: 20 OZ Tumbler Brigade: 20 oz 18/8 stainless steel double wall tumbler with vacuum sealed insulation. Viking brand or equivalent. Clear push on lid. Laser engraved custom art work logos (1st Armored Brigade, 3rd Infantry Division). Logo decoration area size is 2.50x3.75x 11.5 inches. Tumbler must be capable of keeping liquids cold up to 16 hours and hot up to 8 hours. Each tumbler comes with its own retail gift box., 125, EA; LI 016: 20 OZ Tumbler 1-64: 20 oz 18/8 stainless steel double wall tumbler with vacuum sealed insulation. Viking brand or equivalent. Clear push on lid. Laser engraved custom art work logos (1-64 Armor Regiment). Logo decoration area size is 2.50x3.75x 11.5 inches. Tumbler must be capable of keeping liquids cold up to 16 hours and hot up to 8 hours. Each tumbler comes with its own retail gift box., 88, EA; LI 017: 20 OZ Tumbler 3-69: 20 oz 18/8 stainless steel double wall tumbler with vacuum sealed insulation. Viking brand or equivalent. Clear push on lid. Laser engraved custom art work logos (3-69 Armor Regiment). Logo decoration area size is 2.50x3.75x 11.5 inches. Tumbler must be capable of keeping liquids cold up to 16 hours and hot up to 8 hours. Each tumbler comes with its own retail gift box., 88, EA; LI 018: 20 OZ Tumbler 5-7 CAV: 20 oz 18/8 stainless steel double wall tumbler with vacuum sealed insulation. Viking brand or equivalent. Clear push on lid. Laser engraved custom art work logos (5-7 Cavalry Regiment). Logo decoration area size is 2.50x3.75x 11.5 inches. Tumbler must be capable of keeping liquids cold up to 16 hours and hot up to 8 hours. Each tumbler comes with its own retail gift box., 70, EA; LI 019: 20 OZ Tumbler 3 BSB: 20 oz 18/8 stainless steel double wall tumbler with vacuum sealed insulation. Viking brand or equivalent. Clear push on lid. Laser engraved custom art work logos (3rd Brigade Support Battalion). Logo decoration area size is 2.50x3.75x 11.5 inches. Tumbler must be capable of keeping liquids cold up to 16 hours and hot up to 8 hours. Each tumbler comes with its own retail gift box., 50, EA; LI 020: 20 OZ Tumbler 10 ENG: 20 oz 18/8 stainless steel double wall tumbler with vacuum sealed insulation. Viking brand or equivalent. Clear push on lid. Laser engraved custom art work logos (10th Engineer Battalion). Logo decoration area size is 2.50x3.75x 11.5 inches. Tumbler must be capable of keeping liquids cold up to 16 hours and hot up to 8 hours. Each tumbler comes with its own retail gift box., 88, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC Fort Stewart intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC Fort Stewart is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. The selected Offeror must comply with the following commercial item terms and conditions. FAR 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, will apply: 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of a FAR clause may be accessed electronically at http://www.acqnet.gov/far. DFAR 252.211-7003, Item Identification and Valuation Reference: http://farsite.af.mil This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. New equipment ONLY, NO remanufactured or used products. No "GREY" market items. Please see Salient Characteristics for item specifications. Bid MUST be good for 30 calendar days after submission FOB Destination CONUS (CONtinental U.S.) Shipping charges shall be included in the purchase cost of the products. Sellers shall deliver the products on the own conveyance to the location listed on the purchase order. No partial shipments unless otherwise specified at time of order. In accordance with DFARS 252.232-7003, “Electronic Submission of Payment Requests and Receiving Reports ”, the contractor shall submit their payment request electronically using the Wide Area Workflow (WAWF). The WAWF website is located at https://wawf.eb.mil. There is no charge to use WAWF. Contractors must register to use WAWF at this website and ensure an electronic business point of contact (POC) is designated in the Central Contractor Registration site at http://www.ccr.gov within ten (10) calendar days after award of this contract. Contractor training is available at the website Home Page, under “about WAWF ”. Contractors may contact the WAWF Customer Support for assistance toll free at 866-618-5988; commercial: 801-605-7095; Fax commercial: 801-605-7453 or CSCASSIG@CSD.DISA.MIL To request a questions and answers summary please email clientservices@fedbid.com or submit a request through the "submit a question" feature. Government will award to lowest price technically acceptable.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/fcdad9911cbf4ddd13c1a0f90c30b7ad)
- Place of Performance
- Address: Fort Stewart, GA 31314
- Zip Code: 31314
- Zip Code: 31314
- Record
- SN04546892-W 20170617/170616000130-fcdad9911cbf4ddd13c1a0f90c30b7ad (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |