SOLICITATION NOTICE
39 -- KONE Elevator Spare Parts
- Notice Date
- 12/21/2016
- Notice Type
- Combined Synopsis/Solicitation
- Contracting Office
- 8100 Islamabad Place, Washington, DC 20521
- ZIP Code
- 20521
- Solicitation Number
- PR5935542
- Response Due
- 1/4/2017
- Archive Date
- 7/3/2017
- Point of Contact
- Name: Muhammad Abbasi, Title: Procurement Agent, Phone: +92512014646, Fax: 0092512822879
- E-Mail Address
-
abbasims@state.gov;
- Small Business Set-Aside
- N/A
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is PR5935542 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-93. The associated North American Industrial Classification System (NAICS) code for this procurement is 333921 with a small business size standard of 500.00 employees.This requirement is unrestricted and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2017-01-04 12:30:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be North Brunswick, NJ 08902 The U.S. Embassy Islamabad, Pakistan requires the following items, Brand Name or Equal, to the following: LI 001: ROLLER, HANGER D94MM W=19MM PACK OF 4 PART # KM601106G01, 2, EA; LI 002: ROLLER, ECCENTRIC D=30MM W=9MM PART # KM378032G01, 6, EA; LI 003: COUPLER, LOCK RAILING 2 CENTRE OPENING PART # KM602673G13, 1, EA; LI 004: SENSOR, CURTAIN OF LIGHT IR 40 BEAMS PART # KM50074560, 2, EA; LI 005: SUPPORT, TOOTHED PULLEY D43MM PART # KM601275G01, 2, EA; LI 006: SWITCH, MAGNET 59145010 AMD PART # KM601812G01, 2, EA; LI 007: TRANSFORMER, DRIVE2 115V/225V/385V KM606805G02, 2, EA; LI 008: MOTOR, DOOR DRIVE 2 PART # KM601370G04, 2, EA; LI 009: PCB, UNIT AMD DRIVE 2 PART # KM606810G02, 2, EA; LI 010: SLIDING SHOE PART # KM997109H01, 8, EA; LI 011: HUBNER GTF 7.16L/460D75 WHEEL, 11M PART # KM982792G25, 2, EA; LI 012: FRICTION WHEEL, D75 PART # KM710210G01, 2, EA; LI 013: MXENCODER,D75 L2=4500 PART # KM950278G11, 2, EA; LI 014: BRAKE, MX20 PART # KM710216G03, 2, EA; LI 015: LIMIT SWITCH, 24VDC/250VAC 6A 50/60HZ PART # KM217554, 3, EA; LI 016: PIT STOP SWITCH, CABLE L=8M PART # KM713865G03, 1, EA; LI 017: TRIP,MAGNET PLASTO FERRITE 120X15X6MM PART # KM713228H01, 3, EA; LI 018: STRIP,MAGNET PLASTO FERRITE 270X15X6MM PART # KM713228H02, 3, EA; LI 019: STRIP,MAGNET PLASTOFERRITE PART # KM713228H03, 3, EA; LI 020: SENSOR,MAGNET PART # KM750134G02, 3, EA; LI 021: UNIT,MAINTENANCE LCECCB PART # KM713856G01, 2, EA; LI 022: CONTACTOR 400V 50A03NO 50/60HZ PART # KM275178, 3, EA; LI 023: SIRIUS 2 CONTACTOR RELAY 3NO+1NC 230VAC PART # KM50076868, 3, EA; LI 024: LCE COB ASSEMBLY PART # KM71320G11, 2, EA; LI 025: LCECAN ASSEMBLY PART # KM713110G04, 2, EA; LI 026: LCECCBe ASSEMBLY PART # KM50025436G11, 2, EA; LI 027: LCECPU561 ASSEMBLY PART # KM773390G03, 2, EA; LI 028: LCEFCB ASSEMBLY KM713700G11, 6, EA; LI 029: LCEGTW02 ASSEMBLY KM50027064G03, 2, EA; LI 030: LCEOPT ASSEMBLY PART # KM713150G11, 2, EA; LI 031: PCB,LCEREC PART # KM713140G07, 2, EA; LI 032: CEADOe ASSEMBLY PART # KM50006052G02, 2, EA; LI 033: ALARM BELL,CABLE L=40M PART # KM713868G01, 2, EA; LI 034: POWER MODULE,230V 5A 50/60HZ PART # KM280783, 2, EA; LI 035: AC DRIVE,VACON KR6 40A IP23 PART # KM997159, 1, EA; LI 036: BUTTON BASE,MAIN AMBER LCS PART # KM857781G11, 5, EA; LI 037: BUTTON BASE,SECONDARY AMBER PART # KM857781G16, 10, EA; LI 038: PRESSEL ROUND BRUSHED TACTILE DOWN PART # KM870820G092, 5, EA; LI 039: PRESSEL ROUND BRUSHED TACTILE UP PART # KM870820G091, 5, EA; LI 040: COLLARARROUND SURFACE SCOTCH BRITE PART # KM857791H01, 10, EA; LI 041: RING BUTTON FIXING PART # KM772808H01, 10, EA; LI 042: F2KSDM, CAR AND LANDING INDICATOR BAORD PART # KM856270G01, 2, EA; LI 043: BUTTON BASE COP CALL AMBER PART # KM857782G08, 10, EA; LI 044: BUTTON BASE COP DOOR OPEN AMBER PART # KM857782G10, 2, EA; LI 045: BUTTON BASE ALARM AMBER COP PART # KM857782G05, 2, EA; LI 046: PRESSEL ROUND BRUSHED TACTILE 1 PART # KM870820G001, 2, EA; LI 047: PRESSEL ROUND BRUSHED TACTILE 2 PART # KM870820G002, 2, EA; LI 048: PRESSEL ROUND BRUSHED TACTILE 3 PAR # KM870820G003, 2, EA; LI 049: PRESSEL ROUND BRUSHED TACTILE 4 PART # KM870820G004, 2, EA; LI 050: PRESSEL ROUND BRUSHED TACTILE 5 PART # KM870820G005, 2, EA; LI 051: PRESSEL ROUND BRUSHED TACTILE 6 PART # KM870820G006, 2, EA; LI 052: PRESSEL ROUND BRUSHED TACTILE 7 PART # KM870820G007, 2, EA; LI 053: PRESSEL, ROUND BRUSHED TACTILE G PART # KM870821G126, 2, EA; LI 054: PRESSEL ROUND BRUSHED TACTILE BELL PART # KM870820G080, 2, EA; LI 055: PRESEL ROUND BRUSHED TACTILE DO PART # KM870820G081, 2, EA; LI 056: PRESSEL ROUND BRUSHED TACTILE DC PART # KM870820G082, 2, EA; LI 057: PRESSEL,ROUND BRUSHED TACTILE DOE PART # KM870820G083, 1, EA; LI 058: KIT 9 RECTANGULAR LED SPOT LIGHT (1 SET CONSIST OF 9 LED LIGHTS AND TRANSFORMER) PART # KM970038G04, 1, EA; LI 059: BELT,STEEL CORE TIMING 24.9X3.7X2250MM PART # KM601278H02, 1, EA; LI 060: MX-ENCODER,D37.3 L2=4500 PART # KM950278G01, 1, EA; LI 061: BRAKE, MX10NB PART # KM1341022G01, 2, EA; LI 062: RELAY 24VDC-250VAC-3NO/1NC -AgSnO2 PART # KM50009598, 1, EA; LI 063: RELAY,MINIATURE 12VDC 250VAC 10A PART # KM773326G01, 1, EA; LI 064: PCB,LCEREC PART # KM713140G05, 1, EA; LI 065: LCE COB ASSEMBLY PART # KM713720G11, 1, EA; LI 066: KDL16L DRIVE MODULE,14A 400V PART # KM953503G42, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, U.S. Embassy Islamabad, Pakistan intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. U.S. Embassy Islamabad, Pakistan is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. If this is a ?Brand Name Only? procurement, Seller certifies that it is an authorized distributer of the brand name product being sold to the Department of State and that it has the certification/specialization level required by the manufacturer, to support both the product sale and product pricing, in accordance with applicable manufacturer certification/specialization requirements. Unless otherwise specified, Seller warrants that the products are new and in their original box(es). In addition to providing pricing at www.FedBid.com for this solicitation, each Offeror must provide any required, NON-PRICING responses (e.g. technical proposal, representations and certifications, etc.) so that they are received no later than the closing date and time for this solicitation. Submissions can be sent to clientservices@fedbid.com. This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to FAR 4.1102 and other applicable regulations and guidelines. Information can be found at www.sam.gov. All Bids must be valid for 30 days from the closing date for this solicitation. No exceptions or qualifications. New equipment ONLY, NO grey market or refurbished products. Items must be in original packaging, never used, and not altered in any way. Components of the requested equipment, to include memory, must be manufacturer-approved and may not be compatible, remanufactured, or refurbished equipment. All items must be covered by manufacturer?s warranty and procured through a manufacturer approved distribution channel. Sellers must be able to document their ability to provide items through manufacturer approved distribution channels upon request. The Seller confirms to have sourced all products submitted in this Bid from manufacturer-approved channels for Federal sales, in accordance with all applicable laws and manufacturer?s current applicable policies at the time of purchase. Seller must be able to support both the product sale and product pricing, in accordance with applicable manufacturer certification / specialization requirements. If software is provided or included, Seller shall, upon request, provide Buyer with a copy of the End User License Agreement. Seller certifies that all software is licensed originally to Buyer as the original licensee authorized to use the software. All bid prices must include shipping FOB Destination. No partial shipments are permitted, unless otherwise specified by Contracting Officer at time of award. (a) The provider of information technology shall certify applications are fully functional and operate correctly as intended on systems using the Federal Desktop Core Configuration (FDCC). This includes Internet Explorer 7 configured to operate on Windows XP and Vista (in Protected Mode on Vista). For the Windows XP settings, see http://csrc.nist.gov/itsec/guidance_WinXP.html and for the Windows Vista settings, see: http://csrc.nist.gov/itsec/guidance_vista.html. (b) The standard installation, operation, maintenance, update, and/or patching of software shall not alter the configuration settings from the approved FDCC configuration. The information technology should also use the Windows Installer Service for installation to the default ?program files? directory and should be able to silently install and uninstall. (c) Applications designed for normal end users shall run in the standard user context without elevated system administration privileges. (d) The Department of State currently intends to use Vista in Protected Mode in the future when all devices at all worldwide locations have sufficient capacity to permit an upgrade from the XP operating system. Pursuant to the Trade Agreements Act (19 U.S.C. 2512(a)) (TAA), Federal acquisitions of supplies may be made only from offerors that will supply products of an eligible country under any of the free trade agreements entered into pursuant to the TAA. An article is considered a product of a country only if it is wholly a product of that country or if it has been ?substantially transformed? in that country into a new and different article of commerce with a name, character, or use distinct from that of the original article(s). Note that any item that is a discreet article as it is sold in commerce, regardless of its ultimate function or use, cannot be considered ?substantially transformed? based solely on its integration into IT or other systems. The Contractor and its employees shall exercise the utmost discretion in regard to all matters relating to their duties and functions. They shall not communicate to any person any information known to them by reason of their performance of services under this contract which has not been made public, except in the necessary performance of their duties or upon written authorization of the Contracting Officer. All documents and records (including photographs) generated during the performance of work under this contract shall be for the sole use and become the exclusive property of the U.S Government. Furthermore, no article, book, pamphlet, email, recording, broadcast, speech television appearance, film or photograph concerning any aspect of work performed under this contract shall be published or disseminated through any media without the prior written authorization of the Contracting Officer. These obligations do no cease upon the expiration or termination of this contract. The Contractor shall include the substance of this provision in all contracts of employment and in all subcontracts hereunder. The selected Offeror must comply with the following commercial item terms and conditions. FAR 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, will apply: 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of a FAR clause may be accessed electronically at http://www.acqnet.gov/far.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/0d3b1c21eb98d8f9ed270b48740dec99)
- Place of Performance
- Address: North Brunswick, NJ 08902
- Zip Code: 08902
- Zip Code: 08902
- Record
- SN04358456-W 20161223/161221235645-0d3b1c21eb98d8f9ed270b48740dec99 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |