Loren Data's SAM Daily™

FBO DAILY - FEDBIZOPPS ISSUE OF DECEMBER 10, 2016 FBO #5496
SOLICITATION NOTICE

13 -- 43B, 44B, 45B Projectile Gun Unit (PGU)

Notice Date

12/8/2016
 

Notice Type

Presolicitation
 

NAICS

332993 — Ammunition (except Small Arms) Manufacturing
 

Contracting Office

Department of the Army, Army Contracting Command, ACC - RI (W52P1J), 3055 Rodman Avenue, Rock Island, Illinois, 61299-8000, United States
 

ZIP Code

61299-8000
 

Solicitation Number

W52P1J-16-R-0078
 

Archive Date

1/10/2017
 

Point of Contact

Chet A. Jacks, Phone: 3097824952
 

E-Mail Address

chet.a.jacks.civ@mail.mil
(chet.a.jacks.civ@mail.mil)
 

Small Business Set-Aside

N/A
 

Description

Synopsis: For the Projectile Gun Unit (PGU)-43/B Training Cartridge, PGU-44/B High Explosive (HE) Cartridge, and the PGU-45/B High Fragmentation (HF) Cartridge, Load, Assemble and Pack. The U.S. Army Contracting Command-Rock Island (ACC-RI), Arsenal, Rock Island IL 61299-6000, on behalf of the Office of Project Manager for Combat Ammunition Systems (PM CAS), located at Picatinny Arsenal, New Jersey intends to issue a Request for Proposal (RFP) procurement of the 105mm Projectile Gun Unit (PGU)-43/B Training Cartridge, PGU-44/B High Explosive (HE) Cartridge, and the PGU-45/B High Fragmentation (HF) Cartridge. This effort is for the Load, Assemble and Pack (LAP) of these three cartridges for the Special Operations Command (SOCOM) for the AC-130 Gunship training and tactical missions. The CTG Artillery (ARTY) 105mm Training and Practice PGU-43/B Cartridge, DODIC CA22, National Item Identification Number (NIIN) 01-472-1854 is the designation for the 105mm Inert Cartridge with Supplementary charge. It is made by taking an old stock Army M1 projectile that does not pass the required 200 percent cast quality x-ray inspection, removing the Comp-B fill from the projectile body, refilling the projectile with inert filler, cavity drill and installation of a fuze well cup and reinstalling the TNT supplementary charge. The projectile is mated with a CYU-1B brass cartridge case (same cartridge case as the Army M14) containing the M28A2 percussion primer and the M67 propelling charge. The round is fitted with a M739A1 or the M557 fuze, depending on fuze availability. LAP of the round requires crimping the cartridge case to the projectile and packaging into PA71/A containers, which are then placed in a wire-bound box that holds 39 PGU-43/B cartridges. The CTG ARTY 105mm HE PGU-44/B Cartridge, DODIC CA34, NIIN 01-515-9269 is the designation for the 105mm Cartridge (similar to the Army 105mm HE M1 (MOD) Cartridge). It consists of a refurbished Army M1 projectile body that is filled with approximately 5 lbs. of Comp-B explosive, TNT Supplementary Charge, CYU-1/B brass cartridge case containing the M28A2 percussion primer and the M67 Propellant charge. The round is fitted with an FMU-153/B fuze. LAP of the round requires 200 percent x-ray inspection of the fill, crimping the cartridge case to the projectile and packaging into PA71/A containers which are then placed in the wire-bound box that holds 39 PGU-44/B cartridges. The CTG ARTY 105mm, HF, HE PGU-45/B Cartridge without Fuze, DODIC CA33, NIIN 01-514-8595 is the designation for the 105mm HF, HE Cartridge. LAP of the PGU-45/B consists of filling a new HF projectile body with approximately 5 lbs. of Comp-B explosive, fitting the round with a TNT Supplementary Charge, crimping the CYU-1/B brass cartridge case containing the M28A2 percussion primer to the projectile, and adding the M67 Propellant Charge. The projectile is then packaged into PA71/A containers, which are then placed in the wire bound box that holds 39 PGU-45/B cartridges. Competition for this effort will be limited to the National Technology and Industrial Base (NTIB), within the United States and Canada, under the authority of 10 U.S.C 2304(c)(3), as implemented by FAR 6.302-3(a)(2)(i), Industrial Mobilization; Engineering, Developmental, or Research Capability; or Expert Services. The Government intends to award a Firm Fixed Priced (FFP) Indefinite Delivery, Indefinite Quantity (IDIQ) contract with five one-year ordering periods covering FY17-FY21 requirements. The estimated contract value will be $78M. The minimum guarantee amount (MGA) is $2500, which will be issued concurrently with the base IDIQ award to the successful offeror. The offeror should possess all the necessary equipment, facilities and personnel to produce the PGU)-43/B, PGU-44/B and the PGU-45/B. The successful offeror will be expected to produce up to 8,000 PGU cartridges a month. Award will be made to the best overall proposal, which is determined to be the most beneficial to the Government. Each offeror will be evaluated against the solicitation criteria to determine if the offeror has the technical expertise, equipment, and personnel required to manufacture and manage the product in accordance with the solicitation requirements and delivery schedule as delineated in Section F of the solicitation. The Technical Data Package (TDP) is available for this acquisition. The Point of Contract for this notification and any requests/questions may be directed to Chet A. Jacks at chet.a.jacks.civ@mail.mil. Telephone inquiries will not be accepted.
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/notices/a4fde95f85aed90f0ed1c2b4f7e93378)
 

Place of Performance

Address: Army Contracting Command - Rock Island (ACC-RI), Rock Island, Illinois, 61299-8000, United States

Zip Code: 61299-8000
 

Record

SN04346558-W 20161210/161208234024-a4fde95f85aed90f0ed1c2b4f7e93378 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |