MODIFICATION
43 -- 150 PSI Rotary Screw Compressor
- Notice Date
- 7/1/2016
- Notice Type
- Modification/Amendment
- NAICS
- 333912
— Air and Gas Compressor Manufacturing
- Contracting Office
- Department of the Army, National Guard Bureau, USPFO for Tennessee, PO Box 40748, Nashville, Tennessee, 37204-0748
- ZIP Code
- 37204-0748
- Solicitation Number
- W912L7-16-Q-1814
- Archive Date
- 7/27/2016
- Point of Contact
- Sinamar B. Benauro, Phone: 6153130774
- E-Mail Address
-
sinamar.b.benauro.civ@mail.mil
(sinamar.b.benauro.civ@mail.mil)
- Small Business Set-Aside
- N/A
- Description
- Closed on 12 July 2016. The Tennessee Army National Guard has a need for the following items: Brand Name or Equal •· Item 0001; Quantity = 2 ; UP6-50 150PSI Rotary Screw Compressor with Dryer SALIENT CHARACTERISTICS Capacity ‐ 201cfm @ 150 psig Maximum operating pressure - 150 psig Weight - 2726 lbs. or less Connection size - 1.5" NPT Dimensions (L x W x H) ‐ Not to Exceed 67.4" x 54.3" x 52.8" space is vital must be no larger than 460V/3/60 Total Enclosed Fan Cooled (TEFC) Motor 3 Micron Inlet Air Filter or better Star Delta Starter Electronic Controller NEMA 4 (NEMA 1 dryer) Low Sound Enclosure (69 dba) Integral Refrigerated Dryer & Filter Start ‐ up Kit •· Item 0002; Quantity = 1; Tank 400 Gallon Vertical with electronic drain valve SALIENT CHARACTERISTICS MUST BE COMPATIBLE WITH 50HP ROTARY SCREW COMPRESSOR PROVIDED 200 PSI minimum Vertical 400 Gallon minimum Standard Primer •· Item 0003; Quantity = 1; Electronic drain Valve kit SALIENT CHARACTERISTICS Electronic drain valve kit - (1067 SCFM, 165 PSI, 1.0" NPT RELIEF VALVE INLET) Includes safety Relief valve, gauge, and drain valve Dimensions - Diameter X Length - 36" X 93" must NOT exceed due to space is limited •· Item 0004; Quantity = 1; D180IN Dryer SALIENT CHARACTERISTICS MUST BE COMPATIBLE WITH SUPPLIED COMPRESSORS CAPACITY - 106 SCFM MUST HANDLE AIR FLOWS FROM 7 ‐ 212 SCFM DEW POINT - ISO CLASS 6, 50 F REFRIGERANT - R ‐ 134A MAXIMUM OPERATING PRESSURE - 203 PSIG MAXIMUM INLET TEMPERATURE - 140 F WEIGHT ‐ NOT TO EXCEED 104 LBS CONNECTION SIZE - 1" NPT DIMENSIONS - NOT TO EXCEED (D x W x H) 16.5" x 21.5" x 22.5" SPACE IS LIMITED STAINLESS STEEL DEMISTER VARIABLE SPEED FAN ADJUSTABLE ELECTRONIC DRAIN CORROSION ‐ RESISTANT HEAT EXCHANGER •· Item 0005; Quantity = 1; FA230IG Prefilter SALIENT CHARACTERISTICS CAPACITY - 135 SCFM MAXIMUM OPERATING PRESSURE - 250 PSIG WEIGHT - 4.5 LBS CONNECTION SIZE - 1" NPT CONDENSATE CONNECTION - 1/2" NPT DIMENSION - MUST NOT EXCEED (W x H) 5.08" x 12.56" SPACE IS LIMITED DUAL SCALE PRESSURE DIFFERENTIAL GAUGE AUTOMATIC DRAIN VALVE MUST REMOVE PARTICULATE TO 0.1 MICRON AND PROVIDE COALESCING FILTRATION TO 0.03 PPM (W) •· Item 0006; Quantity = 1; FA230IH After Filter SALIENT CHARACTERISTICS CAPACITY - 135 SCFM MAXIMUM OPERATING PRESSURE - 250 PSIG WEIGHT - 4.5 LBS CONNECTION SIZE - 1" NPT CONDENSATE CONNECTION - 1/2" NPT DIMENSION - MUST NOT EXCEED (W x H) 5.08" x 12.56" SPACE IS LIMITED DUAL SCALE PRESSURE DIFFERENTIAL GAUGE AUTOMATIC DRAIN VALVE MUST REMOVE PARTICULATE TO 0.1 MICRON AND PROVIDE COALESCING FILTRATION TO 0.008 PPM (W) •· Item 0007; Quantity = 1; Polysep PSG-30 oil water separator SALIENT CHARACTERISTICS MUST BE COMPATIBLE WITH SUPPLIED COMPRESSOR, DRYER AND FILTERS SCFM RATING - 390 POLYGLYCOL, 575 PAOs CONDENSATE INLET NPT - ½" OIL OUTLET NPT - ¾" MAX WATER VOLUME - 30 GALLONS DIMENSIONS - MUST NOT EXCEED (L x W x H) 21" x 34" x 39" SPACE IS LIMITED •· Item 0008; Piping Installation CSMS ‐ M will remove existing units and piping. CSMS ‐ M will place new units. CSMS ‐ M will provide electrical. Contractor will provide and use 50mm (2") and 32mm (1.25") Simpler Aluminum piping & fittings. Contractor will pipe from each compressor/dryer unit to tank with ball valves at discharge of each compressor. Contractor will tee into the piping from the other unit prior to tank. Contractor will pipe into existing units to new piping header. Contractor will pipe from tank to existing header connections. Contractor will provide extra tee/ball valve for future use/piping to another area. Contractor will pipe through wall to inside of building where D180in or equivalent dryers & filters will be installed (piped) to existing 1" connection. Contractor will install tank kit on tank and run condensation tubing from drain valves to Oil/Water separator. Contractor will Startup and Test system providing CSMS ‐ M with a functional and efficient finished product. Buy Terms Equipment Condition: New Equipment Only; All items must be covered by the manufacturer's Warranty. Shipping Condition: Shipping must be free on Board (FOB) destination (CONUS), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. SAM Requirement. This solicitation requires registration with the System for Award Management (SAM) in order to be considered for award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. Registration must be "ACTIVE" at the time of award. This RFQ is UNRESTRICTED. The North American Industrial Classification System (NAICS) code for this effort is 333912 Air and Gas Compressor Manufacturing with a small business size of 1,000 employees. The solicitation ends on Tuesday, 12 July 2016 CST, and all offerors are due by that deadline. Submitted questions will be addressed if they are asked no later than 4PM CST on Friday, 08 July 2016. EVALUATION CRITERIA The TNARNG is soliciting for quote and intends to award Firm-Fixed Price Contract. In addition, this will be made IAW FAR 52.211-6 Brand Name or Equal and Lowest Price Technically Acceptable (LPTA) offer. On Time Offer Required for Consideration, Offerors must submit offers IAW FAR 52.212-1(f)(1) On time of offers. Commercial items terms and conditions. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-2, Evaluation - Commercial Items, FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. http://farsite.hill.af.mil/vffara.htm /. 52.252-1 Solicitation Provisions Incorporated by reference, 52.252-2 Clauses incorporated by reference (feb 1998). 252.232-7003 WAWF, 252.232-7006 WAWF Clause, Wide Area Workflow (WAWF) Vendor must submit invoice via WAWF- https://wawf.eb.mil/, 252.211-7003 Item Identification and Valuation. Delivery and Shipping Information Delivery Days: within 30 days after the award Point of Contact referencing this solicitation is Sinamar B. Benauro at sinamar.b.benauro.civ@mail.mil. Phone number 615-313-0774 Shipping Information: TN Army National Guard SGT Robert D. Schenck VTS Smyrna BLDG 200 321 Weakley Lane, Smyrna, TN 37167-2025 Hours of delivery: (M-F closed on Holidays) 0700-1530 CST Tel. number: 615-267-7444
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/NGB/DAHA40/W912L7-16-Q-1814/listing.html)
- Place of Performance
- Address: TN Army National Guard, VTS Smyrna BLDG 200, 321 Weakley Lane, Smyrna, Tennessee, 37167, United States
- Zip Code: 37167
- Zip Code: 37167
- Record
- SN04169549-W 20160703/160701233954-a0cbc470f85e00f392091b4a3df8e4df (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |