MODIFICATION
84 -- OCP Nametapes and Patches
- Notice Date
- 6/8/2015
- Notice Type
- Modification/Amendment
- NAICS
- 314999
— All Other Miscellaneous Textile Product Mills
- Contracting Office
- ACC-APG - Natick (SPS), ATTN: AMSRD-ACC-N, Natick Contracting Division (R and BaseOPS), Building 1, Kansas Street, Natick, MA 01760-5011
- ZIP Code
- 01760-5011
- Solicitation Number
- W911QY-15-R-0033
- Response Due
- 7/7/2015
- Archive Date
- 8/7/2015
- Point of Contact
- Benjamin Hoell, 5082336189
- E-Mail Address
-
ACC-APG - Natick (SPS)
(benjamin.g.hoell.civ@mail.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- Solicitation Number: W911QY-15-R-0033 Notice Type: Combined Synopsis/Solicitation INTRODUCTION: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6 in combination with Subpart 13.5, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested a written solicitation will not be issued. SOLICITATION TYPE: This solicitation, numbered W911QY-15-R-0033 issued as a Request for Proposal (RFP). CURRENTNESS: The solicitation and incorporated provisions and clauses are those in effect through Federal Acquisition Regulation. SET-ASIDE: This acquisition will be set aside for 100% small business. The North American Industry Classification System (NAICS) Code is 314999, and the size standard is 500 employees. The Government anticipates awarding one or more Firm Fixed Price BPA's for Nametapes and Patches. Contract Line Item Numbers (CLINs): Each CLIN will be dependent on individual Calls under this Blanket Purchase Agreement (BPA). DESCRIPTION OF REQUIREMENTS: Embroidered patches, rank, unit insignia or identification associated with the Operational Camouflage Pattern (OCP) uniform requirements identified in MIL-DTL-44436B and in Updates and Technical Changes to MIL-DTL-44436B. By regulation these items can only be provided by an organization that has been certified by The Institute of Heraldry (TIOH) and must meet the requirements identified in MIL-DTL-14651; Insignia, Embroidered, Rank, Grade and Service Stripes. Existing Unit Patches shall be identified by Management Control Number (MCN) and meet the requirement for MIL-DTL-14652; Insignia, Embroidered, Organizational, Badges and Branch of Service. Nametapes associated with the Operational Camouflage Pattern (OCP) uniform requirements identified in MIL-DTL-44436B and in Updates and Technical Changes to MIL-DTL44436B. By regulation these items can only be provided by an organization that has been certified by The Institute of Heraldry (TIOH) and must meet the requirements identified in MIL-DTL-12718; Insignia, Distinguishing, Army and Air Force, Woven and Manufacturing Drawing, A-1-241; U.S. Army Distinguishing Insignia. Production of these patches require a maximum 30 day turn around for all requirements as the soldiers must have the required identification prior to being deployed. In emergency situations, with less than 10 soldiers, the offeror may be asked to meet a one week turn-around time. This effort is critical in identifying and protecting soldiers deployed to theaters of operation. Applicable Documents: MIL-DTL- 14651 - Insignia, Embroidered, Rank Grade and Service Stripes MIL-DTL-14652 - Insignia, Embroidered, Organizational, Badges and Branch of Service MIL-DTL-12718 - Insignia, Distinguishing, Army and Air Force, Woven MIL-DTL-44436 - Cloth, Wind Resistant Poplin, Nylon/Cotton Blend MIL-DTL44436B, Changes, dated, 26 June 2014 U.S. Army Distinguishing Insignia, Manufacturing Drawing, A-1-241, dated, 13 May 2015 Requirements: a) Offeror must be able to produce unit identification insignia (patches and unit insignia) that meet all requirements of specification in less than 30 days to meet the deployment needs of soldiers. b) Offeror must be able to produce Army nametapes that meet all requirements of specification in less than 30 days to meet the deployment needs of soldiers. c) Offeror must be able to produce Air Force and Navy rank and unit identification insignia (patches and unit insignia) that meet all requirements of specification in less than 30 days to meet the deployment needs of service members d) Offeror must be able to quick turn orders of less than 10 soldiers in one week in emergency situations. e) Offeror must be able to input consolidated invoices in Wide Area Workflow (WAWF) on no more than a twice a week basis to ensure government payment process effort works for all parties. f) Offeror must provide Order confirmation within 48hrs (2 business days) g) Offeror must provide upon shipment of order (Invoice/tracking#/date/carrier) h) Offeror must be able to provide open order status upon request i) Offeror must be able to acknowledge and resolved all discrepancies within 48hrs (2 business days) Qualifications: The offeror must be a source certified by the Institute Of Heraldry and familiar with the processes involved in making OCP rank, and embroidered insignia patches and unit identification along with nametapes. Berry Amendment: The Prime Contractor and the entire supply chain are required to adhere to the Berry Amendment. The Prime Contractor shall educate and mentor the entire supply chain in the implementation and maintenance of Berry Amendment compliance. The Prime Contractor shall assess the entire supply chain for compliance to the Berry Amendment, and shall maintain documentation of Berry product compliance, and supply chain education, mentoring, and assessments. The Government shall assess the Prime Contractor's compliance to the Berry Process in conjunction with the Quality Systems assessment of Purchasing and Supplier Control. The Government cannot accept noncompliant garments, and the contractor shall not be paid for any items in violation of the Berry Amendment. If a Berry Amendment violation is determined to have occurred after the government has accepted delivery, the contractor is required to replace the item in violation of the Act with an item from a domestic source, at their own expense. Once the contractor has provided items from an acceptable source; the Government may again accept delivery and compensate the contractor. The Government may pursue additional claims against the contractor if the Government incurred other damages due to non-compliance. camouflage REQUIREMENTS Handling of Scraps, Seconds, Irregulars, Defective Garments, Extra Material (SSIDGEM), and other products containing Government-owned Operational Camouflage Pattern (OCP) The Government claims exclusive ownership of the Operational Camouflage Pattern (OCP). Therefore, no entity other than the Government, or those contracted by or having obtained proper permission or licenses from the Government to do so, may produce, sell, or transfer in any manner any items (clothing or non-clothing) containing or copying, in whole or in part, the Operational Camouflage Pattern. In order to minimize Government costs regarding the production of fabric and uniforms, the Contractor agrees to handle scraps, seconds, irregulars, defective garments, and extra material (SSIDGEM) containing the Operational Camouflage Pattern in the following manner: Utilize SSIDGEM within Government deliverables in a nonvisible manner, e.g., as pocket liners to blouses and trousers; Utilize SSIDGEM within commercial distribution channels in a nonvisible manner, e.g., as pocket liners to blouses and trousers, nonrecognizable filler material, chopped material as carpet backing, etc. Any remaining SSIDGEM containing the Operational Camouflage Pattern, which are not utilized for Government contracts or for a purpose authorized in writing by the Government through a license agreement, shall be destroyed and not sold or transferred in any manner. Inquiries regarding licenses for commercial sales of other OCP printed products shall be handled in accordance with the paragraph below. Destruction shall be in accordance with all applicable State, Federal, and Local laws, regulations, and ordinances. This restriction applies to the prime contractor, as well as all subcontractors, and shall be incorporated into all agreements with subcontractors. The contractor shall retain records of the quantity of SSIDGEM destroyed for six (6) years after the contract is closed out and, at the request of the Contracting Officer, shall certify to the destruction of all SSIDGEM. The contractor shall notify the Contracting Officer and the Quality Assurance Representative (QAR) of the date, time, and place of destruction and permit the QAR to be present and witness the destruction of any and all SSIDGEM containing the Operational Camouflage Pattern. Any deviation from the forgoing paragraph is at the Government's discretion and must be memorialized in a written agreement, executed by both the Contracting Officer and the prime contractor, in order to be effective. Vendors are cautioned that the Government will not reimburse for any SSIDGEM or destruction of SSIDGEM. Inquiries Regarding Licenses for Commercial Sales of Articles Bearing Operational Camouflage Pattern (OCP) The contractor shall address any inquiries regarding a license to cover commercial sales of articles bearing the Operational Camouflage Pattern (OCP) to the Office of Research and Technology Applications, RDNS-BOB-T, U.S. Army Natick Soldier Research Development and Engineering Center, 15 Kansas Street, Natick, MA 01760, Phone: 508-233-4184 OR 508-233- 5667. The contractor shall provide in the inquiry a means to separately account for commercial sales involving the use of scraps, seconds, irregulars, defective garments and extra material (SSIDGEM) resulting from this contract, and/or commercial sales that cover other products with the OCP and unrelated to SSIDGEM produced under this contract. For SSIDGEM, see above. The contractor shall copy all inquiries and license agreements to the Contracting Officer and to the Product Manager, Soldier Clothing and Individual Equipment, PEO Soldier, 5981 13th Street, Bldg. 1155, Fort Belvoir, VA 22060-5800. Contract Details The Product Manager-Soldier Clothing and Individual Equipment (PM-SCIE) will enter into a Blanket Purchase Agreement (BPA) for a three year ordering period with Firm Fixed Price (FFP) CLINs. This Blanket Purchase Agreement (BPA) does not obligate any funds and is not a binding contract. The Government will be obligated only to the extent that authorized BPA calls are actually made under this agreement. BPA Master Dollar Limit - $650,000.00 BPA Call Limit: $149,000.00 Ordering Procedures Each order under this agreement will be assigned a call number by Natick Contracting Division (NCD). Invoices shall reflect BPA number and call number. A call number will be associated with each delivery. The NCD point of contact is Mr. Benjamin Hoell at (508) 233-6189 or benjamin.g.hoell.civ@mail.mil. Invoicing Monthly billing is preferred. The invoice shall include the following information below: 1. Name of supplier 2. BPA number and call number 3. Itemized list of work performed and being invoiced for (including quantity, unit price, and extended subtotals/total) The BPA holder will be required to submit an invoice and receiving report (COMBO) with approving DD250 through Wide Area Workflow (WAWF) for each BPA call delivery. An approving DD250 can be obtained from the POC by submitting an advance copy of the invoice (before loading into WAWF) to the PCO for review. DELIVERY: The POC holder shall ensure that deliveries are documented with the correct contract information: 1. Name of supplier 2. BPA number and call number 3. Itemized list of work performed and being invoiced for (including quantity, unit price, and extended subtotals/total) The BPA holder, unless otherwise directed, shall ship directly to the following address indicated in the ship to block of the BPA. PM Soldier Equipment Staging/Net Facility DODAAC W912H7 Mr. Jim Gustafson 7100 Millet Hwy Lansing, MI 48917 (517) 316-4072 PROPOSAL INSTRUCTIONS: Parts of the provision at 52.212-1, Instructions to Offerors -- Commercial, applies to this acquisition and is incorporated by reference into this RFP. All actions in regards to this RFP will be in accordance with FAR Part 13.303 - Blanket Purchase Agreements. EVALUATION OF PROPOSALS: This Request for Proposals (RFP) is for a Blanket Purchase Agreement (BPA) and therefore will not evaluate pricing. Pricing and Costs will be evaluated through each individual Call under this BPA. Price reasonableness will be determined at the time of award for each Call. PM-SCIE will establish a number of BPAs with multiple vendors to allow for maximum competitive pricing and rapid response to the needs of PM-SCIE. Parts of the provision of 52.212-2, Evaluation -- Commercial Items, apply to this acquisition and are incorporated by reference into this Request for Proposals (RFP). Proposals will be evaluated on the following factors: Compliance with Government requirements, Technical Capabilities, and Past Performance. OFFEROR REPRESENTATIONS AND CERTIFICATION: Offerors will include a completed copy of the provision at 52.212-3, Offerors Representations and Certifications - Commercial Items, with this offer. STANDARD TERMS & CONDITIONS: The clause at 52.212-4, Contract Terms and Conditions -- Commercial Items, applies to this acquisition and is incorporated by reference into this RFP. ADDITIONAL TERMS & CONDITIONS: The following FAR and DFARS clauses apply to this acquisition and are incorporated by reference: 52.202-1 Definitions JAN 2012 52.203-3 Gratuities APR 1984 52.203-6 Alt I Restrictions On Subcontractor Sales To The Government (Sep 2006) -- Alternate I OCT 1995 52.203-11 Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions SEP 2007 52.204-7 System for Award Management FEB 2012 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards JUL 2010 52.223-3 Convict Labor JUNE 2003 52.222-19 Child Labor - Cooperation with Authorities & Remedies JULY 2010 52.222-21 Prohibition of Segregated Facilities FEB 1999 52.222-26 Equal Opportunity MAR 2007 52.222-36 Affirmative Action For Workers With Disabilities JUN 1998 52.222-50 Combating Trafficking in Persons AUG 2007 52.222-54 Employment Eligibility Verification SEP 2009 52.225-13 Restrictions on Certain Foreign Purchases JUN 2008 52.227-1, Alt 1 Authorization and Consent DEC 2007 52.227-2 Notice And Assistance Regarding Patent And Copyright Infringement DEC 2007 52.227-6 Royalty Information APR 1984 52.227-9 Refund of Royalties APR 1984 52.227-11 Patent Rights-Ownership By The Contractor DEC 2007 52.229-3 Federal, State And Local Taxes APR 2003 52.229-4 Federal, State, And Local Taxes (State and Local Adjustments) APR 2003 52.232-1 Payments APR 1984 52.232-8 Discounts for Prompt Payment FEB 2002 52.232-33 Payment by Electronic Funds Transfer--Central Contractor Registration OCT 2003 52.233-1 Disputes JULY 2002 52.233-3 Protest After Award AUG 1996 52.242-15 Stop-Work Order AUG 1989 52-243-1 Changes- Fixed Price AUG 1987 52.247-34 F.O.B. Destination NOV 1991 252.203-7000 Requirements Relating to Compensation of Former DoD Officials JAN 2009 252.203-7002 Requirement to Inform Employees of Whistleblower Rights JAN 2009 252.204-0001 Line Item Specific: Single Funding SEP 2009 252.204-7004 Alt A Central Contractor Registration (52.204-7) Alternate A SEP 2007 252.204-7006 Billing Instructions OCT 2005 252.209-7004 Subcontracting With Firms That Are Owned or Controlled By DEC 2006 The Government of a Terrorist Country 252.211-7003 Alt I Item Identification and Valuation (Jun 2011) Alternate I Dec 2011 252.225-7001 Buy American and Balance of Payments Program DEC 2012 252.225-7002 Qualifying Country Sources As Subcontractor DEC 2012 252.225-7012 Preference for Certain Domestic Commodities Feb 2013 252.225-7013 Duty Free-Entry-Basic NOV 2014 252.227-7025 Limitations on the Use or Disclosure of Government Furnished Information MAR 2011 252.227-7039 Patents-Reporting Of Subject Inventions APR 1990 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports MAR 2008 252.232-7010 Levies on Contract Payments DEC 2006 252.243-7001 Pricing Of Contract Modifications DEC 1991 252.243-7002 Requests for Equitable Adjustment MAR 1998 252.246-7000 Material Inspection And Receiving Report MAR 2008 252.247-7022 Representation of Extent of Transportation by Sea AUG 1992 252.247-7023 Alt I Transportation of Supplies by Sea Mar 2000 5152.232-7003 Invoicing Instructions and Payment (WAWF Instructions) MAR 2008 52.252-2 Clauses Incorporated By Reference (Feb 1998) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this address: http://farsite.hill.af.mil/farsite_alt.html SUBMISSION OF PROPOSALS: Proposals shall be submitted electronically to Mr. Benjamin Hoell at NCD via benjamin.g.hoell.civ@mail.mil. All proposals shall be submitted by 3:00pm Eastern Time on 7 July 2015. **Proposals will only be accepted electronically via the email address provided above. QUESTIONS: Questions regarding this acquisition may contact Mr. Hoell at the above listed email address. Additional Info: US Army Contracting Command - APG - Natick Contracting Division Contracting Office Address: Army Contracting Center - Aberdeen Proving Ground, ATTN: CCAP-SCN-NESSIE Natick Contracting Division Building 1, Kansas Street Natick, MA 01760-5011 Point of Contact: Mr. Benjamin Hoell at (508) 233-6189 or benjamin.g.hoell.civ@mail.mil Point of Contact for U.S. Army Distinguishing Insignia, Manufacturing Drawing, A-1-241, dated, 13 May 2015 Sherry A. O'Connor sherry.a.oconnor.civ@mail.mil 703-806-4982 Point of Contact for Updates and Technical Changes to MIL-DTL44436B, dated, 26 June 2014 Magdalena Mulherin Magdalena.mulherin.civ@mail.mil 508-233-5392
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/8c97585391b6201228936ed0f1022e1c)
- Place of Performance
- Address: ACC-APG - Natick (SPS) ATTN: CCAP-SCN-NESSIE, Natick Contracting Division, Building 1, Kansas Street Natick MA
- Zip Code: 01760-5011
- Zip Code: 01760-5011
- Record
- SN03756438-W 20150610/150608234638-8c97585391b6201228936ed0f1022e1c (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |