SOURCES SOUGHT
58 -- Beta D-50 Battery Tester/Analyzer
- Notice Date
- 3/3/2015
- Notice Type
- Sources Sought
- Contracting Office
- ACC-APG - Aberdeen Division B, HQ CECOM CONTRACTING CENTER, 6001 COMBAT DRIVE, ABERDEEN PROVING GROU, MD 21005-1846
- ZIP Code
- 21005-1846
- Solicitation Number
- MARKET-SURVEY-5797-1
- Response Due
- 3/17/2015
- Archive Date
- 5/2/2015
- Point of Contact
- Lindsay Newhouse, 4438615484
- E-Mail Address
-
ACC-APG - Aberdeen Division B
(lindsay.d.newhouse.civ@mail.mil)
- Small Business Set-Aside
- N/A
- Description
- DO NOT CONTACT POSTER - L. NEWHOUSE. FOR ANY INFORMATION CONTACT: Tony Blais 443-395-6991 This Market Survey to locate 2 each, Beta C-50 Battery Tester/Analyzers. This survey is published in compliance with FAR Part 10, (Market Research). This item is manufactured by Power Products Inc, Novato CA, CAGE: 3YDK0. The Specifications for the Beta D-50 Battery Tester/Analyzer is: AC Line Input 115 +/- 10%, 50/60Hz, 3 amperes or 230 +/- 10% 50/60Hz 1.5 amperes (selectable on rear of unit) DC Discharge Capacity0-50 amperes adjustable current Current Accuracy less than +/- 2% from discharge initiation to cutoff Timer SettingAdjustable from 0 to 999 minutes Accuracy less than +/- 0.1% Digital Voltmeter less than +/- 0.2 volts Meter Accuracy Ammeter less than +/- 0.2 amperes CoolingFan cooled HousingAluminum chassis Outer DimensionsHeight14 in. (356 mm) Depth15 in. (381 mm) Width10 in. (260 mm) AC Line CordAWG 16 3 wire grounded 6 ft long with 115 volt 15 ampere plug User required to change to 230 volt plug DC Discharge4 ft long with Aircraft battery connector FusesAC line fuse 3A/250V, type MDA 1 x DC lone fuse 70AMAXI Fuse ModesAnalysis (automatic cut-off) and deep Cycle (full discharge) with cutoff set to one volt NOTE: This is NOT a solicitation - this is a request for information only and all information received will be used for planning purposes only. The Army Acquisition Command, Aberdeen Proving Ground does not intend to award a contract on the basis of your responses or otherwise pay for the preparation of any information presented. All proprietary information should be marked as such. **Please respond NO LATER than the Respond Date and Time If the offeror is an actual manufacturer, they are required to have: 1. A quality system similar to ISO-9001for monitoring all phases of manufacturing will be requested after contract award. 2. Identify whether you are a small or large business 3. If you are a small business then identify your subcategory, i.e. 8A, SDB, SDVOB, etc. Respond to My Attention by COB Eastern on 17 Mar 2015 Tony Blais, Email: anthony.w.blais.civ@mail.mil
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/9ed8b0ea673aa85c85a5338308d64bf1)
- Place of Performance
- Address: ACC-APG - Aberdeen Division B HQ CECOM CONTRACTING CENTER, 6001 COMBAT DRIVE ABERDEEN PROVING GROU MD
- Zip Code: 21005-1846
- Zip Code: 21005-1846
- Record
- SN03657158-W 20150305/150303234846-9ed8b0ea673aa85c85a5338308d64bf1 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |