SOURCES SOUGHT
25 -- COVER, FITTED VEHICULAR
- Notice Date
- 11/7/2014
- Notice Type
- Sources Sought
- NAICS
- 336390
— Other Motor Vehicle Parts Manufacturing
- Contracting Office
- Defense Logistics Agency, DLA Acquisition Locations, DLA Land and Maritime, P O Box 3990, Columbus, Ohio, 43218-3990, United States
- ZIP Code
- 43218-3990
- Solicitation Number
- SPE7LX15R0025
- Archive Date
- 11/29/2014
- Point of Contact
- Pamela R. Baker, Phone: 6146926629, Russell C. Edwards, Phone: 614-692-8245
- E-Mail Address
-
Pamela.Baker@dla.mil, Russell.Edwards@DLA.MIL
(Pamela.Baker@dla.mil, Russell.Edwards@DLA.MIL)
- Small Business Set-Aside
- Total Small Business
- Description
- NSN:2540014504024 - ** PID Text - COVER,FITTED,VEHICULAR THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA AND ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGH JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OF STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO INTERNATIONAL AGREEMENTS. TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, "MILITARY CRITICAL TECHNICAL DATA AGREEMENT," FORM IS AVAILABLE AT THE WORLD WIDE WEB ADDRESS HTTP://WWW.DLIS.DLA.MIL/JCP OR BY WRITING TO: DLA LOGISTICS INFORMATION SERVICE FEDERAL CENTER 74 WASHINGTON AVE., NORTH BATTLE CREEK, MI 49037-3084 TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT, DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 "EXEMPTIONS OF GENERAL APPLICABILITY," AND/OR EAR PART 740 ARE APPLICABLE. NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL DATA ARE REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN APPLICABLE AGREEMENT OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO RECEIVE A COPY OF THE EXPORT CONTROLLED TECHNICAL DATA. NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY PERMITTED BY DODD 5230.25." THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST MEET QPL/QML SPECIFICATIONS.BY SUBMITTING AN OFFER, THE OFFEROR AGREES TO PROVIDE QPL/QML COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE APPLICABLE QPL(S)/QML(S). IAW BASIC DRAWING NR 19207 12340777 REVISION NR K DTD 03/02/2007 PART PIECE NUMBER: 12340777-15 IAW REFERENCE DRAWING NR 19207 12460231 REVISION NR DTD 09/01/1995 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12340197 REVISION NR B DTD 03/04/1991 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12342457 REVISION NR C DTD 05/30/1991 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12340519 REVISION NR D DTD 11/07/1995 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12340211 REVISION NR B DTD 03/13/1991 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12340222 REVISION NR A DTD 02/21/1991 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 24617 MK61.103A REVISION NR DTD 06/01/1954 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 97403 13226E7538 REVISION NR C DTD 08/15/1997 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12340682 REVISION NR C DTD 05/12/2000 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12340777-15 REVISION NR DTD 05/16/2012 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12460334 REVISION NR B DTD 11/20/1998 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12340517 REVISION NR D DTD 04/20/2001 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12340526 REVISION NR D DTD 04/20/2001 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12340864 REVISION NR A DTD 02/17/1989 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12342456 REVISION NR A DTD 05/12/1992 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 81337 2-3-567 REVISION NR B DTD 03/24/2011 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12340198 REVISION NR B DTD 01/02/1991 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12340210 REVISION NR D DTD 11/05/1998 PART PIECE NUMBER: IAW REFERENCE QAP 19207 12340777 REVISION NR B DTD 09/12/2002 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12340679 REVISION NR B DTD 09/15/2006 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12463286 REVISION NR B DTD 01/01/1999 PART PIECE NUMBER: REFERENCE NUMBER:CS001 REFERENCE NUMBER:CS086 PREP FOR DELIVERY LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS - ** Packaging Text - SHALL BE PACKAGED STANDARD COMMERCIAL IN ACCORDANCE WITH ASTM D 3951. Markings Paragraph When ASTM D3951, Commercial Packaging is specified, the following apply:,,All Section "D" Packaging and Marking Clauses take precedence over ASTM D3951.,,In addition to requirements in MIL-STD-129, when Commercial Packaging is used, the Method of Preservation for all MIL-STD-129 marking and labeling shall be "CP" Commercial Pack.,,The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) as specified in the contract take precedence over QUP in ASTM D3951. - - *** LTC PID Packaging Header Text *** - - ************************************************************************************************************ - GLOSSARY - ************************************************************************************************************ PACKAGING TEXT - THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT: Markings Paragraph When ASTM D3951, Commercial Packaging is specified, the following apply:,,All Section "D" Packaging and Marking Clauses take precedence over ASTM D3951.,,In addition to requirements in MIL-STD-129, when Commercial Packaging is used, the Method of Preservation for all MIL-STD-129 marking and labeling shall be "CP" Commercial Pack.,,The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) as specified in the contract take precedence over QUP in ASTM D3951. - ITEM DESCRIPTION TEXT - - REFERENCE NUMBER CS001 - THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA AND ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGH JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OF STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO INTERNATIONAL AGREEMENTS. - TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, "MILITARY CRITICAL TECHNICAL DATA AGREEMENT," FORM IS AVAILABLE AT THE WORLD WIDE WEB ADDRESS HTTP://WWW.DLIS.DLA.MIL/JCP OR BY WRITING TO: - DLA LOGISTICS INFORMATION SERVICE FEDERAL CENTER 74 WASHINGTON AVE., NORTH BATTLE CREEK, MI 49037-3084 - TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT, DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 "EXEMPTIONS OF GENERAL APPLICABILITY," AND/OR EAR PART 740 ARE APPLICABLE. - NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL DATA ARE REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN APPLICABLE AGREEMENT OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO RECEIVE A COPY OF THE EXPORT CONTROLLED TECHNICAL DATA. - NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY PERMITTED BY DODD 5230.25." - - - REFERENCE NUMBER CS086 - THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST MEET QPL/QML SPECIFICATIONS.BY SUBMITTING AN OFFER, THE OFFEROR AGREES TO PROVIDE QPL/QML COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE APPLICABLE QPL(S)/QML(S). -
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DSCC/SPE7LX15R0025/listing.html)
- Record
- SN03569360-W 20141109/141107234049-ada7dab61c9b8dd09a7570208253d5a6 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |