MODIFICATION
70 -- Cisco SmartNet maintenance renewal
- Notice Date
- 9/22/2014
- Notice Type
- Modification/Amendment
- Contracting Office
- 1701 N. Ft. Myer Dr., Arlington, VA 22209
- ZIP Code
- 22209
- Solicitation Number
- SAQMMA14Q0301
- Response Due
- 9/22/2014
- Archive Date
- 3/21/2015
- Point of Contact
- Name: LaWanna Bradley, Title: CONTRACT SPECIALIST, Phone: 7038756069, Fax:
- E-Mail Address
-
BradleyLR@state.gov;
- Small Business Set-Aside
- Total Small Business
- Description
- MODIFICATION NOTICE:Bids are being solicited under solicitation number SAQMMA14Q0301. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued. The solicitation is issued as an invitation for bids (IFB), unless otherwise indicated herein.If your company can provide the product/services listed on the solicitation and comply with all of the solicitation instructions, please respond to this notice. To view the specifications, please go to www.FedBid.com and reference Buy No. 678557_01. NASA SEWP IV Bids Only: Sellers bidding on this opportunity MUST have the items requested on an existing NASA SEWP IV contract. The contract must either be in the Seller's name or the Seller must be able to document its ability to act as an agent of a partner's contract. Sellers must not bid more than their applicable contract ceiling price, excluding the FedBid Fee, for contract-specific items. If FedBid receives notice that, due to inclusion of the FedBid Fee, the Selected Bid's line item pricing is higher than the Selected Seller's applicable published government contract pricing, the FedBid Fee will be reduced to ensure the Selected Bid's line item pricing does not exceed the Selected Seller's applicable contract pricing. Sellers may offer Open Market items only in accordance with the approved Terms and Conditions of their respective NASA SEWP IV contract AND upon approval from the soliciting Contracting officer. Information regarding NASA SEWP IV contracts is available at http://www.sewp.nasa.gov. The FedBid system will automatically calculate SEWP fees to the Seller bid. This is viewable on the Seller's bid confirmation page prior to submittal. This requirement is a [ Small Business ] set-aside and only qualified sellers may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2014-09-22 17:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Washington, DC 20006 The Department of State requires the following items, Exact Match Only, to the following: LI 001: Cisco Systems, Inc. SMARTNET 8X5XNBD Nexus 7010 Bundle (Mfr PN: CON-SNT-C701BN), 13, EA; LI 002: Cisco Systems, Inc. SMARTNET 8X5XNBD 7606S Chassis,6-slot,RSP720-3C,PS (Mfr PN: CON-SNT-7606RCP), 2, EA; LI 003: Cisco Systems, Inc. SMARTNET 8X5XNBD VS-C6509E-S720-10G (Mfr PN: CON-SNT-V6509E72), 8, EA; LI 004: Cisco Systems, Inc. SMARTNET 8X5XNBD Cisco 7606 Chassis,6 (Mfr PN: CON-SNT-7606RCXP), 5, EA; LI 005: Cisco Systems, Inc. 8x5xNBD Service,Catalyst 6509 (Mfr PN: CON-SNT-WS-C6509), 7, EA; LI 006: Cisco Systems, Inc. SMARTNET 8X5XNBD Cat6506E chas, SUP32-GE-3B (Mfr PN: CON-SNT-C6506EGE), 25, EA; LI 007: Cisco Systems, Inc. SMARTNET 8X5XNBD Cisco 7600 Route Swi (Mfr PN: CON-SNT-R7203CXL), 1, EA; LI 008: Cisco Systems, Inc. 8x5xNBD Service,Catalyst 6506 (Mfr PN: CON-SNT-WS-C6506), 17, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, Department of State intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. A Seller may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. Department of State is taking this action in an effort to improve both seller access and awareness of requests and the agency's ability to gather multiple, completed, real-time bids.All responsible Sellers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Sellers that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Sellers that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Sellers may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should Sellers require additional clarification, contact FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com. Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. If this is a ?Brand Name Only? procurement, Seller certifies that it is an authorized distributer of the brand name product being sold to the Department of State and that it has the certification/specialization level required by the manufacturer, to support both the product sale and product pricing, in accordance with applicable manufacturer certification/specialization requirements. Unless otherwise specified, Seller warrants that the products are new and in their original box(es). New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to FAR 4.1102 and other applicable regulations and guidelines. Information can be found at www.sam.gov No partial shipments are permitted unless specifically authorized at the time of award. In addition to providing pricing at www.FedBid.com for this solicitation, each Offeror must provide any required, NON-PRICING responses (e.g. technical proposal, representations and certifications, etc.) so that they are received no later than the closing date and time for this solicitation. The Buy American Act? (1) Restricts the purchase of supplies, that are not domestic end products, for use within the United States. A foreign end product may be purchased if it is determined that the price of the lowest domestic offer is unreasonable or if another exception applies, and (2) Requires, with some exceptions the use of only domestic construction materials in contracts for construction in the United States (3) Buy American Act uses a two-part test to define a domestic end product. (a) The article must be manufactured in the United States; and (b) The cost of domestic components must exceed 50 percent of the cost of all the components. Buy American Act Certificate (June 2003) 52.225-2 Buy American Act Certificate: (a) The offeror certifies that each end product, except those listed in paragraph (b) of this provision, is a domestic end product and that the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products. The terms ?component,? ?domestic end product,? ?end product,? ?foreign end product,? and ?United States? are defined in the clause of this solicitation entitled ?Buy American Act?Supplies.? TO COMPLY, SELLERS MUST LIST THE COUNTRY OF ORIGIN IN EACH LINE ITEM. Seller must be considered a Small Business under NASA SEWP IV contract.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/State/A-LM-AQM/A-LM-AQM/SAQMMA14Q0301/listing.html)
- Place of Performance
- Address: Washington, DC 20006
- Zip Code: 20006
- Zip Code: 20006
- Record
- SN03522543-W 20140924/140922235918-8c1f6bf9fe5726eb23aec29f32879d2a (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |