SOLICITATION NOTICE
78 -- ATHLETIC EQUIPMENT
- Notice Date
- 9/22/2014
- Notice Type
- Combined Synopsis/Solicitation
- Contracting Office
- 430 Army Drive, Barrigada, GU 96913
- ZIP Code
- 96913
- Solicitation Number
- W911YU-14-Q-0301
- Response Due
- 9/24/2014
- Archive Date
- 3/23/2015
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is W911YU-14-Q-0301 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-76. The associated North American Industrial Classification System (NAICS) code for this procurement is 339920 with a small business size standard of 500.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2014-09-24 11:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Barrigada, GU 96913 The National Guard - Guam requires the following items, Meet or Exceed, to the following: LI 001: COMMERCIAL ELLIPTICAL TRAINER Center Drive design Low center of gravity and a balanced frame that prevents rocking Convenient step-up height Close pedal spacing and oversized pedals to accommodate any size user while reducing hip fatigue Commercial rated Natural 21" stride Self-generated power eliminates power cords. Programmable options 325 pound user capacity Dimensions: 31"W x 68"L x 69"H, 3, EA; LI 002: COMMERCIAL TREADMILL Speed:.5 to 10 mph Elevation: 0% to 15% Commercial Heavy Duty Motor Deck: 18mm pre-waxed phenolic Shock Absorption: 6-point deck suspension Running Area: 20" x 60" Rollers: Extra-large 2.5" Crowned Tread belt: High Density 2-ply urethane Floor Space: 32"W x 77"D x 57"H Max User Weight: 350 lbs, 3, EA; LI 003: UPRIGHT EXERCISE BIKE Large, easy to read display Contact heart rate Adjustable tension levels of smooth consistent resistance Over-sized Dura-Firm? seat padding Seat adjusts up and down Front transport wheels allow you to roll the bike Water bottle holder, 2, EA; LI 004: STATIONARY CYCLE ERGOMETER mechanically adjustable resistance measured in kiloponds or newtons; adjustable seat and handlebars; adjustable tension setting (resistance) and an odometer; resistance set by a tension strap on a weighted pendulum connected to the flywheel, 2, EA; LI 005: OLYMPIC STYLE 7' BAR high-strength, stress-proof alloy steel with rolled-in knurling 1000 lb capacity Brass Bushings Steel End Cap, 4, EA; LI 006: PREACHER CURL BENCH PACKAGE adjustable seat and extra-wide, stable design Angled for optimum isolation of biceps Heavy gauge steel construction w/powder coat finish Extra-wide seat and arm pads. 37"H x 35"L x 34"W 300 lb. weight capacity (1ea) 47? Olympic Style EZ Curl Bar; weight: 20lbs Solid Rubber (urethane) Grip Olympic Plates; Impact-resistant (2ea) 25lb Plates (2ea) 10lb Plates (2ea) 5lb Plates (1ea) pair of Olympic spring collars, 2, EA; LI 007: LOCK JAW 2" OLYMPIC BARBELL COLLARS Solid nylon resin frame Superior durability Fast locking and release action Fits all Olympic barbells sleeves (2?/50mm), 12, EA; LI 008: OLYMPIC WEIGHT PLATE SET 455LBS Machine-bored holes, raised numbers and letters for identification, and coated with satin enamel finish. All plates must be consistent in weight, size and quality; set Includes: (6) 45lb Plates (2) 35lb Plates (2) 25lb Plates (4) 10lb Plates (4) 5lb Plates (2) 2.5lb Plates, 3, EA; LI 009: 325LB RUBBER BUMPER PLATE SET W/1500LB BAR Solid Rubber Training Bumper Plates have a reinforced 2" steel sleeve, and can be used with any Olympic bar; Set Includes: 2 x 45LB Solid Rubber Training Bumpers 2 x 35LB Solid Rubber Training Bumpers 4 x 25LB Solid Rubber Training Bumpers 2 x 10LB Solid Rubber Training Bumpers 1 x 7' Men's Olympic 1500lb Test Bar 2 x Olympic Spring Collars, 3, EA; LI 010: OLYMPIC FLAT BENCH PRESS Multiple Racking Positions Commercial Padding Spotter Stand 12? x 24? 2" x 3" Commercial Grade Steel L: 57? W: 48? H: 51?, 2, EA; LI 011: OLYMPIC INCLINE BENCH PRESS Multiple Racking Positions Commercial Padding Spotter Stand 12? x 24? 2" x 3" Commercial Grade Steel L: 61? W: 48? H: 51?, 1, EA; LI 012: OLYMPIC DECLINE BENCH PRESS Multiple Racking Positions Commercial Padding 2" x 3" Commercial Grade Steel L: 81? W: 48? H: 51?, 1, EA; LI 013: FLAT BENCH Steel frame measuring 2" x 3" 12 Gauge Steel High density, dual-layer padding Bench Pad height (floor to top of pad) 17" Rubber base caps Dimensions: 53" x 21" x 18", 2, EA; LI 014: INCLINE/FLAT UTILITY BENCH Steel frame measuring: 2? X 2? Solid handle up front, High Density PU Wheels in back High density, dual-layer back padding Multi-position, high density, dual-layer seat padding Multiple incline positions as well as flat position Solid steel pivot points, Locking pull-pins for adjustments Pad height in flat position(floor to top of pad)18" Rubber base caps, 2, EA; LI 015: DECLINE UTILITY BENCH Steel frame measuring: 2? X 2? High density, tapered, dual-layer padding Multiple position high density feet support roller pads Multiple incline positions as well as flat position Solid steel pivot points, Locking pull-pins for adjustments Pad height in flat position(floor to top of pad)18" Rubber base caps, 2, EA; LI 016: SELF STANDING POWER CAGE/RACK 3" square steel tubing 12 weight horns in the rear for weight storage, and a chin up bar in the front 59"L X 64"W X 88"H or comparable, 2, EA; LI 017: SELF STANDING HALF CAGE/RACK 3? x 3? frame made of steel tubing 2-inch hole spacing for the ultimate in flexibility for hook and spotter arm placement, 12 weight horns (welded to the frame, not bolted), welded J-hooks, extended base with bolt-down tabs for extra stability and safety, and two spotter arms with 1-inch racking pins. Spotter arms reach 24 inches from the front of the uprights. Dimensions: 56"L X 68"W X 88"H or comparable, 2, EA; LI 018: CABLE CROSSOVER MACHINE solid one-piece frame construction, tough and durable two 200-lb. steel weight stack; Upper and lower 180? swivel pulleys ensure fluid cable travel and provide nearly an unlimited range of motion; dual-position chin-up station; 136"L x 32"W x 93"H 2 - 200lb Weight Stacks, 1, EA; LI 019: FUNCTIONAL TRAINER Independent, Adjustable Cable Columns; 180 Degrees of rotation allowing to train from every Angle and any Height. Cables travel 79.5" inches and are constructed of flexible nylon coated, heavy duty strand aircraft cable rated at over 2000 lbs. tensile strength Compact dimensions: 56"D x 40"W x 82"H Weight Stack consists of (2) 200lb Weight Stacks with a user weight ratio of 2:1 Frame is constructed of heavy duty steel tubing; powder coated Pulleys are 3.5" diameter nylon pulleys with sealed ball bearings Rear protective steel weight stack cover for safety. Chrome plated 1" diameter tubular steel Guide Rods. Accessories Included with the functional trainer: Attached Exercise Book, Long Bar, Short Bar, Tricep Rope, Chin Bar, Assisted Pull Up Strap, Ankle Strap, 2 Chains, and two Single Handles, 1, EA; LI 020: 5-75LB RUBBER COATED KETTLE BELL SET Easy to read weight reference Rubber Coated kettlebell Handles on heavier kettle bells are large enough to accommodate both hands. Set includes (1) Each: 5lb, 10lb, 15lb, 20lb, 25lb, 30lb, 35lb, 40lb, 45lb, 50lb, 55lb, 60lb, 65lb, 70lb & 75lb rubber coated kettle bell, 2, EA; LI 021: 3 TIER KETTLE BELL RACK Staggered tier design allows for easy access to all kettle bells. Rubber Lined Trays protect the kettle bells and rack from scratches Commercial Quality Dimensions: (W) 45? x (D) 24? x (H) 33? or comparable dimensions, 2, EA; LI 022: SOLID STEEL URETHANE DUMBBELLS 5-100LB SET precision-machined steel handles and drilled, chamfered and machined heads; welded together to produce a solid steel insert; encapsulated in durable, heavy-duty Urethane, so the dumbbell will not scuff or damage equipment, walls or floors; 12-sided, anti-roll heads with stable, flat, tip-resistant ends; Easy-to-read weight markings are permanently engraved and bonded into the surface; comfortable contour handles ?(1) Pair each in 5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100 lb. increments, 2, EA; LI 023: 6 PAIR DUMBBELL RACK ?Steel frame measuring: 2.75" x 2" ?High density, contoured rubber dumbbell holders (removable) ?Rubber base caps ?Recommended max weight 500 lbs, 6, EA; LI 024: A-FRAME OLYMPIC PLATE TREE ?Dimensions: 29" L x 20" W x 36" H ?Space-saving design ?7 pegs for weight storage, 4, EA; LI 025: INTERLOCKING RUBBER FLOORING CENTER TILE black 2'x 2' x 3/8", 1000, EA; LI 026: OCONUS Shipping/Freight Forwarding Delivery Address GUAM ARMY NATIONAL GUARD ATTN: SFC Loloanie Moniz 430 Army Drive, Bldg 100 Barrigada, Guam 96913-4421, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, National Guard - Guam intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. National Guard - Guam is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. This solicitation requires registration with the System for Award Management (SAM) in order to be considered for award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. Registration must be "ACTIVE" at the time of award. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/437c398fe540e8874d97ef6b01b49768)
- Place of Performance
- Address: Barrigada, GU 96913
- Zip Code: 96913-4421
- Zip Code: 96913-4421
- Record
- SN03521701-W 20140924/140922235016-437c398fe540e8874d97ef6b01b49768 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |