Loren Data's SAM Daily™

FBO DAILY - FEDBIZOPPS ISSUE OF JULY 05, 2014 FBO #4606
DOCUMENT

65 -- Matrix Combo plating Implant system - Attachment

Notice Date

7/3/2014
 

Notice Type

Attachment
 

NAICS

339112 — Surgical and Medical Instrument Manufacturing
 

Contracting Office

Department of Veterans Affairs;Network Contracting Office 8 (248);Room 315, Bldg. 2;10,000 Bay Pines Blvd;Bay Pines FL 33744
 

ZIP Code

33744
 

Solicitation Number

VA24814Q1371
 

Response Due

7/11/2014
 

Archive Date

8/10/2014
 

Point of Contact

Bruce Parrish
 

E-Mail Address

bruce.parrish@va.gov
(bruce.parrish@va.gov)
 

Small Business Set-Aside

Total Small Business
 

Description

This combined synopsis/solicitation VA-248-14-Q-1371, for commercial items has been prepared in accordance with the format in FAR subpart 12.6 as supplemented with additional information included in this notice. This notice constitutes the only solicitation that will be issued. A quotation in response to this notice must be received no later than 2:00 pm EST Tuesday July 11, 2014. The solicitation number, VA248-14-Q-1371, is issued as a Request for Quote (RFQ). This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2005-056. No telephone requests will be accepted. Only written requests received directly from the requester are acceptable. It is the Offerors responsibility to ensure that the quote is received. The applicable North American Industry Classification System Code (NAICS) is 339112, Surgical and Medical Instrument Manufacturing; the size standard is 500 employees. OFFERORS MUST STATE THEIR BUSINESS SIZE when submitting their offer. This procurement is being set aside for Small-Business SYNTHES Matrix Combo Plating System CLIN 01 04.503.708 TI MATRIXMANDIBLE 8 HOLE STRUT PL MALLEABLE 1.0MM HK 5 EA 02 04.503.709 TI MATRIXMANDIBLE 8H STRUT PL CURVED/MALLEABLE/1.0MM THICK 5 EA 03 04.503.726 TI MATRIXMANDIBLE 2X2 HOLE CRESCENT PL 2.0MM THK/ BRD 5 EA 04 04.503.727 TI MATRIXMANDIBLE 3X3 HOLE CRESCENT PL 2.0MM THK/ BRD 5 EA 05 04.503.728 TI MATRIXMANDIBLE 6H PLATE 2.0MM THICK 5EA 06 04.503.729 TI MATRIXMANDIBLE 12 HOLE PLATE 2.0MM THICK 5EA 07 04.503.731 TI MATRIXMANDIBLE 3X3 HOLE ANGLE PLATE 2.0MM THICK/BROAD 5EA 08 04.503.738 TI MATRIXMANDIBLE 20 HOLE RECON PLATE 2.5MM THICK 5 EA 09 04.503.740 TI MATRIXMANDIBLE 7X23 ANGLE RECON PL RIGHT 2.5MM THICK/ 5 EA 10 04.503.739 TI MATRIXMANDIBLE 7X23 ANGLE RECON PL LEFT 2.5MM THICK/ 5 EA 11 04.503.081 TI MATRIXNEURO CONTOUR MESH 38MM X 45MM/0.4MM ALLEABLE 5 EA 12 04.503.082 TI MATRIXNEURO CONTOUR MESH 38MM X 45MM/0.4MM RIGID 5 EA 13 04.503.301 TI MATRIXMIDFACE ORBITAL FLOOR PLATE-ANATOMIC SMALL/0.3MM THK 5 EA 14 04.503.302 TI MATRIXMIDFACE ORBITAL FLOOR PLATE-ANATOMIC MED/0.3MM THICK 5 EA 15 04.503.303 TI MATRIXMIDFACE ORBITAL FLOOR PLATE-ANATOMIC LARGE/0.3MM THK 5 EA 16 04.503.307 TI MATRIXMIDFACE ORBITAL MESH PLATE/0.3MM THICK 5 EA 18 04.503.801 TI MATRIXMIDFACE PREFORMED ORBITAL PLATE SMALL/LEFT 5 EA 19 04.503.802 TI MATRIXMIDFACE PREFORMED ORBITAL PLATE LARGE/LEFT 5 EA 020 04.503.811 TI MATRIXMIDFACE PREFORMED ORBITAL PLATE SMALL/RIGHT 5 EA 21 04.503.812 TI MATRIXMIDFACE PREFORMED ORBITAL PLATE LARGE/RIGHT 5 EA 22 04.503.327 TI MATRIXMIDFACE T-PLATE 3X4 HOLES/0.5MM THICK 5 EA 23 04.503.334 TI MATRIXMIDFACE OBLIQUE L-PL 4X6 HOLES-LEFT/0.5MM THICK 5 EA 24 04.503.335 TI MATRIXMIDFACE OBLIQUE L-PL 4X6 HOLES-RIGHT/0.5MM THICK 5 EA 25 04.503.346 TI MATRIXMIDFACE ADAPTION PLATE/20 HOLES/0.5MM THICK 5 EA 26 04.503.347 TI MATRIXMIDFACE Y-PLATE 1X3 HOLES/0.5MM THICK 5 EA 27 04.503.348 TI MATRIXMIDFACE DOUBLE Y-PL 6 HOLES/0.5MM THICK 5 EA 28 04.503.360 TI MATRIXMIDFACE BOX PLATE 4 HOLES/5MMX10MM/0.5MM THICK 5 EA 29 04.503.361 TI MATRIXMIDFACE BOX PLATE 4 HOLES/10MMX10MM/0.5MM THICK 5 EA 30 04.503.362 TI MATRIXMIDFACE X-PLATE 4 HOLES/0.5MM THICK 5 EA 31 04.503.363 TI MATRIXMIDFACE STRUT PLATE 18 HOLES/0.5MM THICK 5 EA 32 04.503.352 TI MATRIXMIDFACE H-PLATE 11 HOLES/0.7MM THICK 5 EA 33 04.503.353 TI MATRIXMIDFACE OBLIQUE L-PL 2X3 HOLES-LEFT/0.7MM THICK 5 EA 34 04.503.354 TI MATRIXMIDFACE OBLIQUE L-PL 2X3 HOLES-RIGHT/0.7MM THICK 5 EA 35 04.503.355 TI MATRIXMIDFACE OBLIQUE L-PL 3X4 HOLES-LEFT/0.7MM THICK 5 EA 36 04.503.356 TI MATRIXMIDFACE OBLIQUE L-PL 3X4 HOLES-RIGHT/0.7MM THK 5 EA 37 04.503.357 TI MATRIXMIDFACE T-PLATE 3X4 HOLES/0.7MM THICK 5 EA 38 04.503.364 TI MATRIXMIDFACE OBLIQUE L-PL 4X6 HOLES-LEFT/0.7MM THK 5 EA 39 04.503.365 TI MATRIXMIDFACE OBLIQUE L-PL 4X6 HOLES-RIGHT/0.7MM THK 5 EA 40 04.503.373 TI MATRIXMIDFACE ORBITAL RIM PLATE/12 HOLES/0.7MM THK 5 EA 41 04.503.377 TI MATRIXMIDFACE Y-PLATE 1X3 HOLES/0.7MM THICK 5 EA 42 04.503.378TI MATRIXMIDFACE DOUBLE Y-PL 6 HOLES/0.7MM THICK 5 EA 43 04.503.390 TI MATRIXMIDFACE BOX PLATE 4 HOLES/5MMX10MM/0.7MM THICK 5 EA 44 04.503.391 TI MATRIXMIDFACE BOX PLATE 4 HOLES/10MMX10MM/0.7MM THICK 5 EA 45 04.503.392 TI MATRIXMIDFACE X-PLATE 4 HOLES/0.7MM THICK 5 EA 46 04.503.393 TI MATRIXMIDFACE STRUT PLATE 18 HOLES/0.7MM THICK 5 EA 47 04.503.730 TI MATRIXMANDIBLE 20H PLATE 2.0MM THICK 5 EA 48 04.503.737 TI MATRIXMANDIBLE 12 HOLE RECON PLATE 2.5MM THICK 5EA This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-056. The following FAR and VAAR provisions and clauses are incorporated into this solicitation document by reference: 52.212-1, Instructions to Offerors-Commercial; 52.212-4, Contract Terms and Conditions-Commercial Items; 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders (of which 52.222-3, 52.222-19, 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.223-18, 52.225-1, 52.225-13, and 52.232-34 are applicable); and VAAR 852.246-70, Guarantee. Additionally, please include a completed copy of provision 52.212-3, Offeror Representations and Certifications-Commercial Items, with your offer. 52.212-2, Evaluation - Commercial Items, and VAAR 852.211-73, Brand Name or Equal, are also incorporated into this solicitation. The offered items must meet all requirements set forth in the product specifications/salient characteristics section to be considered a responsive offer. The offeror must meet the requirements of the solicitation and have the lowest cumulative price for all items. If an "equal" item is offered, the offeror must submit descriptive literature that conclusively establishes product equivalency and technical acceptability and compatibility at time of quote submission. Also, if the offeror is not the manufacturer of the quoted items, the offeror shall submit written evidence at time of quote that clearly verifies that the firm is an authorized distributor and/or reseller of the quoted products and an authorized installer/maintenance provider to ensure proprietary equipment, licensing, and warranties are not voided. The Government intends to issue a firm fixed price contract. Offerors shall submit quotes on solicitation VA248-14-Q-1371. Quotes must be submitted electronically via email to Bruce.parrish@va.gov. The Subject Line of your email shall state: RFQ VA248-14-Q-1371 Quote Submission" The offered items must be for New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid must be valid for 30 calendar days after close of solicitation. Registration with the System for Award Management (SAM), pursuant to applicable regulations and guidelines is required prior to award. Registration information can be found at www.sam.gov.
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/spg/VA/BPVAMC/VAMCCO80220/VA24814Q1371/listing.html)
 

Document(s)

Attachment
 

File Name: VA248-14-Q-1371 VA248-14-Q-1371.docx (https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=1473734&FileName=VA248-14-Q-1371-000.docx)

Link: https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=1473734&FileName=VA248-14-Q-1371-000.docx

 

File Name: VA248-14-Q-1371 VA248-14-Q-1371.pdf (https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=1473735&FileName=VA248-14-Q-1371-001.pdf)

Link: https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=1473735&FileName=VA248-14-Q-1371-001.pdf

 

Note: If links are broken, refer to Point of Contact above or contact the FBO Help Desk at 877-472-3779.
 

Record

SN03415393-W 20140705/140704001222-df7345e3336d0e169daa963f5bad1b7b (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |