SOURCES SOUGHT
66 -- INDICATOR, DIGITAL DISPLAY
- Notice Date
- 12/18/2013
- Notice Type
- Sources Sought
- NAICS
- 334514
— Totalizing Fluid Meter and Counting Device Manufacturing
- Contracting Office
- Defense Logistics Agency, DLA Acquisition Locations, DLA Land and Maritime - BSM, P O Box 3990, Columbus, Ohio, 43216-5000, United States
- ZIP Code
- 43216-5000
- Solicitation Number
- SPE7LX14R0064
- Archive Date
- 1/7/2014
- Point of Contact
- Shonna A. Gray, Phone: 6146923593, Russell C. Edwards, Phone: 1-614-692-8245
- E-Mail Address
-
shonna.gray@dla.mil, Russell.Edwards@DLA.MIL
(shonna.gray@dla.mil, Russell.Edwards@DLA.MIL)
- Small Business Set-Aside
- N/A
- Description
- NSN: 6625-02-123-8721 INDICATOR, DIGITAL DISPLAY THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA AND ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGH JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OF STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO INTERNATIONAL AGREEMENTS. TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, "MILITARY CRITICAL TECHNICAL DATA AGREEMENT," FORM IS AVAILABLE AT THE WORLD WIDE WEB ADDRESS HTTP://WWW.DLIS.DLA.MIL/JCP OR BY WRITING TO: DLA LOGISTICS INFORMATION SERVICE FEDERAL CENTER 74 WASHINGTON AVE., NORTH BATILE CREEK, MI 49017-3084 TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT, DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 "EXEMPTIONS OF GENERAL APPLICABILITY," AND/OR EAR PART 740 ARE APPLICABLE. NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL DATA ARE REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN APPLICABLE AGREEMENT OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO RECEIVE A COPY OF THE EXPORT CONTROLLED TECHNICAL DATA. NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY PERMITTED BY DODD 5230.25." THE TECHNICAL DATA CITED IN THIS SOLICITATION IS NOT COMPLETE, HOWEVER, THE ITEM PROVIDED MUST MEET THE REQUIREMENTS OF THE CITED TECHNICAL DATA IN ADDITION TO THE REQUIREMENTS OF THE PART NUMBERED ITEM LISTED ON THIS SOLICITATION. ADEQUATE DATA FOR THE EVALUATION OF ALTERNATE OFFERS IS NOT AVAILABLE AT THE PROCUREMENT AGENCY. THE OFFEROR MUST PROVIDE A COMPLETE DATA PACKAGE INCLUDING DATA FOR THE APPROVED AND ALTERNATE PART FOR EVALUATION. DRAWINGS ARE SUBJECT TO EXPORT-CONTROL REGULATIONS AND DISTRIBUTION IS LIMITED TO THOSE CONTRACTORS WITH JCP CERTIFICATION. CERTIFICATION IS MAINTAINED AT THE DLA LOGISTICS INFORMATION SERVICE IN BATTLE CREEK, MI. CMC ELECTRONIQUE INC 90073 P/N 244-419-721-001 MCDONNELL DOUGLAS CORP MCDONNELL 19133 P/N B55M0017-11 PACKAGING: SHALL BE PACKAGED STANDARD COMMERCIAL IN ACCORDANCE WITH ASTM D 3951. Markings Paragraph When ASTM D3951, Commercial Packaging is specified, the following apply: •,,All containers shall meet ASTM D4169, Standard Practice for Performance Testing of Shipping Containers and Systems. •,,All Section D Packaging Clauses take precedence over ASTM D3951. •,,In addition to requirements in MIL-STD-129P, all Labeling and Marking shall have a Method of Preservation of Commercial Pack applied to the MIL-STD-129 identification labels on all shipping containers, including the unit and intermediate levels. The Method of Preservation (M) of Commercial Pack (CP) shall be applied to all labels and marking as "MCP." •,,For all shipments of packaged materiel to the Government, which includes either Depot (DLA-Direct) or DVD (Customer-Direct) shipments, both DoD linear and two-dimensional (2D) bar code markings are required in accordance with MIL-STD-129. See DLAD 52.211-9010 for exceptions to the Military Shipment Label (MSL) requirement. When the MSL is required, the Transportation Control Number (TCN) is not an exception and must always be present. TCN construction is detailed in DTR 4500.9-R (Appendix L). •,,The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) as specified in the contract take precedence over ASTM D3951. •,,Loose-fill cushioning and dunnage materials are prohibited in all shipments to DOD customers. •,,Unitization in accordance with MIL-STD-147, Palletized Unit Loads, is required for all shipments to the DOD activities.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DSCC-BSM/SPE7LX14R0064/listing.html)
- Record
- SN03254225-W 20131220/131218235136-53d6f7f366e084c8e67bbdb0811e92b5 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |