SOURCES SOUGHT
66 -- Circuit Board Tester (for PCBs) - Sources Sought Notice
- Notice Date
- 8/15/2013
- Notice Type
- Sources Sought
- NAICS
- 334519
— Other Measuring and Controlling Device Manufacturing
- Contracting Office
- Department of the Navy, United States Marine Corps, Marine Corps Base Camp Lejeune - RCO, PO Box 8368, MCB Camp Lejeune, North Carolina, 28547-8368
- ZIP Code
- 28547-8368
- Solicitation Number
- M67001-13-Q-0208
- Archive Date
- 9/3/2013
- Point of Contact
- Monica L. Curley, Phone: 9104512073
- E-Mail Address
-
monica.curley@usmc.mil
(monica.curley@usmc.mil)
- Small Business Set-Aside
- N/A
- Description
- Sources Sought Notice document SOURCES SOUGHT NOTICE PRE-DEPLOYMENT TRAINING In accordance with Federal Acquisition Regulation (FAR) 52.215-3, "Request for Information or Solicitation for Planning Purposes" This Sources Sought Notice is for information and planning purposes only at this time and shall not be construed as a solicitation or as an obligation on the part of the Government. This is a Request for Information (RFI) for sources sought that can provide circuit (PC board) board testers. Pursuant to Federal Acquisition Regulation (FAR) 15.201(e), responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Interested vendors please provide the following information: Business Name:________________________________________ Point of Contact: _______________________________________ Phone Number: _______________________________________ Cage Code: _________________ NAICS: ________________ Interested vendors please provide responses to the following questions: 1. Product description, brochures, and literature for the circuit board testers? ___________________________________________________________ 2. Manufacturer and manufacturer part number. ___________________________________________________________ ___________________________________________________________ Please submit responses to the Contracting Specialist listed below. Ms. Monica Curley Email: monica.curley@usmc.mil (910) 451-2073 APPLICABLE DIRECTIVES Federal Acquisition Regulation (FAR) Department of Defense Federal Acquisition Regulation Supplement (DFARS) STATEMENT OF WORK 1. INTRODUCTION. This notice is to determine interested parties that can provide the required circuit board testing equipment identified in Paragraph 3 below, to include delivery and installation to Camp Lejeune, North Carolina. 2. BACKGROUND. ELMACO requires a quantity of three (3) circuit board testers, identified in Paragraph 3 below, in order to significantly enhance its capability to perform Intermediate Maintenance to Micro and Micro-Miniature (2M) Printed Circuit Board (PCB) level. The circuit board testers shall have the ability to reverse engineer PCBs, making it possible for any Government technician train on the equipment to create test routines, schematics, and node lists for any PCB in the requiring activity's inventory. ELMACO currently supports the Huntron Gold Disc Certification Program. ELMACO intends on augmenting the Huntron program with the circuit board testing equipment identified below. 3. SCOPE. The Contractor shall provide all equipment and services identified in the table below, to include delivery and installation to Camp Lejeune, North Carolina. Installation does not include any electrical work. It is the Government's responsibility to provide electricity at the installation site. SCHEDULE OF ITEMS: The manufacturer names and part numbers are provided below only to assist potential interested sources in understanding the Government's requirement. The Government is not soliciting or suggesting a particular name brand, and will consider other brands that fulfill the Government's need. ITEM NAME: Circuit Board Tester (Printed Circuit Board Tester) QTY (3) ITEM DESCRIPTION: Brand Name or Equal to Diagnosys PinPoint II R, Part No: P2R-14. PinPoint II 14 Slot Chassis to include variable PSU and SG/SW. The chassis unit shall include driver channels and edge card digital channels that support functional and in circuit tests. The unit shall contain two power supplies: one to power the system and the other one to power the test routines. Each item shall include the following configuration/options: -Controller Card (Diagnosys P/N: P2C). The controller card dictates the options for programming the hardware necessary for the schematic capture process, and the processing power to carry out PinPoint II functions rapidly. QTY of (1) per Circuit Board Tester. -Driver Card (Diagnosys P/N: P2D). The driver card works with the TestVue software to provide the capability to test a variety of circuit cards for faults. The driver card is also programmable for flexibility. QTY of (3) per Circuit Board Tester. -Multiplexer Piggy-Back Board for P2D Driver Card (Diagnosys P/N: P2PMX). The multiplexer provides the ability to switch between analog and digital circuitry. Shall be added onto the PD2 card prior to shipping to the Government. QTY of (3) per Circuit Board Tester. - Vectorless Test Card (Diagnosys P/N: P2-VTC). Includes VI-ASA, shorts locator and LCR. The vectorless card provides a range of powerful and flexible capabilities to enhance the fault-finding abilities of the system. This card can test passive components by isolating circuitry. QTY of (1) per Circuit Board Tester. -Analog Controller Card (Diagnosys P/N: P2A). Includes P2A-OSC. The analog controller card allows for testing of analog circuit boards and can be used as a part of an integrated test sequence or as an individual analog instrument. The card includes a frequency counter, digital multi meter, oscilloscope and arbitrary wave form generator. QTY of (1) per Circuit Board Tester. -Arb Module for P2A (Diagnosys P/N: P2A-ARB). The arbitrary waveform/function generator includes four (4) independent channels, a waveform generator, a waveform source, current limits and analogue input capabilities. QTY of (1) per Circuit Board Tester. - 4 x 96Matrix Card (Diagnosys P/N: P2RM). The matrix card is the functional switch for the system that allows the unit to communicate with itself in an organized manner. QTY of (2) per Circuit Board Tester. -Dip Clip Set (Diagnosys P/N: DIP-48). 8, 14, 16, 20, 24, (0.3) & 24, 40, 48 (0.6). The dip clip set for the system provides the standard integrated chip connectors for testing components for faults. QTY of (1) per Circuit Board Tester. -SOIC Clip Set (Diagnosys P/N: SMT-68). 8, 14, 16, 20, 24, 28 (SOIC) & 20, 28, 32, 44, 52, 68 (PLCC). The SOIC and PLCC set for the system provides the standard integrated chip connectors for testing components for faults. QTY of (1) per Circuit Board Tester. -Testing Connectors (Diagnosys P/N: 41-0470). 8_32 pin 100 Thou Und 0.3 and 0.4. Set of standard connectors for testing. QTY of (1) per Circuit Board Tester. -Testing Connectors (Diagnosys P/N: 41-0510). 24_48 pin 100 Thou Und 0.6 and 0.9. Set of standard connectors for testing. QTY of (1) per Circuit Board Tester. ITEM NAME: One Year Extended Support QTY (1) ITEM DESCRIPTION: Twelve months of extended support for a quantity of three (3) Circuit Board Tester (Printed Circuit Board Tester) identified above. ITEM NAME: On-Site Training QTY (1) ITEM DESCRIPTION: One (1) consecutive week of on-site training at Government's location for Government personnel to be trained on the above circuit board testing equipment. The contractor shall provide all management, supervision, tools, materials, equipment, and labor to provide requested training.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DON/USMC/M67001/M67001-13-Q-0208/listing.html)
- Place of Performance
- Address: CAMP LEJEUNE, North Carolina, 28542, United States
- Zip Code: 28542
- Zip Code: 28542
- Record
- SN03151497-W 20130817/130816000635-802b944066c68f23e916c831a6e3f347 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |