Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY - FEDBIZOPPS ISSUE OF JULY 20, 2013 FBO #4256
SOLICITATION NOTICE

56 -- Aluminum-CLad Wood Casement Windows

Notice Date
7/18/2013
 
Notice Type
Combined Synopsis/Solicitation
 
Contracting Office
24290 Doane Mountain Road, Keystone, SD 57751
 
ZIP Code
57751
 
Solicitation Number
P13PS101765
 
Response Due
7/29/2013
 
Archive Date
1/25/2014
 
Point of Contact
Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
 
E-Mail Address
Clientservices@fedbid.com;
 
Small Business Set-Aside
Total Small Business
 
Description
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is P13PS101765 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-68. The associated North American Industrial Classification System (NAICS) code for this procurement is 332321 with a small business size standard of 500.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2013-07-29 11:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Hot Springs, SD 57747 The DOI NPS MWR NEKOTA MABO requires the following items, Meet or Exceed, to the following: LI 001: Custom sized window units of the exact size. Dimensions shown represent the overall (outside) size of the window frame. 27-1/4 inches wide x 57 inches high - Hinge RH See Specifications - Attachment 1., 4, EA; LI 002: Custom sized window units of the exact size. Dimensions shown represent the overall (outside) size of the window frame. 27-1/4 inches wide x 57 inches high - Hinge LH See Specifications - Attachment 1., 3, EA; LI 003: Custom sized window units of the exact size. Dimensions shown represent the overall (outside) size of the window frame. 35 inches wide x 53 inches high - Hinge LH See Specifications - Attachment 1., 3, EA; LI 004: Custom sized window unit of the exact size. Dimensions shown represent the overall (outside) size of the window frame. 35 inches wide x 53 inches high - Hinge RH See Specifications - Attachment 1., 1, EA; LI 005: Custom sized window units of the exact size. Dimensions shown represent the overall (outside) size of the window frame. 19 inches wide x 53 inches high - Hinge RH See Specifications - Attachment 1., 2, EA; LI 006: Custom sized window units of the exact size. Dimensions shown represent the overall (outside) size of the window frame. 19 inches wide x 53 inches high - Hinge LH See Specifications - Attachment 1., 2, EA; LI 007: Custom sized window units of the exact size. Dimensions shown represent the overall (outside) size of the window frame. 37 inches wide x 49 inches high - Hinge RH See Specifications - Attachment 1., 3, EA; LI 008: Custom sized window unit of the exact size. Dimensions shown represent the overall (outside) size of the window frame. 37 inches wide x 49 inches high - Hinge LH See Specifications - Attachment 1., 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, DOI NPS MWR NEKOTA MABO intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. DOI NPS MWR NEKOTA MABO is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. The U.S. Department of Interior, National Park Service, Wind Cave National Park, Hot Springs, SD, has a requirement for the purchase and delivery, including unloading, of Custom Aluminum-Clad Wood Casement Windows. This solicitation is being issued as a request for quotes (RFQ), solicitation number P13PS101765. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.219-6, 52.219-13, 52.219-28, 52.222-3, 52.222-19, 52.222-21, 52.222-26, 52.222-36, 52.223-18, 52.225-1, 52.225-13, 52.232-33. FAR 52.225-18 Place of Manufacture. FAR 52.252-1 Solicitation Provisions Incorporated by Reference. FAR 52.252-2 Clauses Incorporated by Reference. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. All offerors must submit a completed Buy American Act Certificate with offer. See Attachment 2. This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. Payment requests must be submitted electronically through the U. S. Department of the Treasury?s Invoice Processing Platform System (IPP). "Payment request" means any request for contract financing payment or invoice payment by the Contractor. To constitute a proper invoice, the payment request must comply with the requirements identified in the applicable Prompt Payment clause included in the contract, or the clause 52.212-4 Contract Terms and Conditions - Commercial Items included in commercial item contracts. The IPP website address is: https://www.ipp.gov. Under this contract, the following documents are required to be submitted as an attachment to the IPP invoice [CO to edit and include the documentation required under this contract]: NONE REQUIRED The Contractor must use the IPP website to register, access, and use IPP for submitting requests for payment. The Contractor Government Business Point of Contact (as listed in CCR) will receive enrollment instructions via email from the Federal Reserve Bank of Boston (FRBB) within 3 - 5 business days of the contract award date. Contractor assistance with enrollment can be obtained by contacting the IPP Production Helpdesk via email ippgroup@bos.frb.org or phone (866) 973-3131. If the Contractor is unable to comply with the requirement to use IPP for submitting invoices for payment, the Contractor must submit a waiver request in writing to the Contracting Officer with its proposal or quotation. Delivery is required within 60 days or less after receipt of order (ARO). The Government intends to award without discussions and the Government reserves the right not to make an award at all. The Government anticipates award of a commercial item, firm, fixed-price contract resulting from this solicitation to the responsible offer whose offer conforming to the solicitation is the best value to the Government.
 
Web Link
FBO.gov Permalink
(https://www.fbo.gov/spg/DOI/NPS/APC-IS/P13PS101765/listing.html)
 
Place of Performance
Address: Hot Springs, SD 57747
Zip Code: 57747-6027
 
Record
SN03120340-W 20130720/130719000329-8324a81033f890e16cdac6f36ae02444 (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.