SOLICITATION NOTICE
66 -- Manual Wedge Wire Bonder
- Notice Date
- 6/26/2013
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 333242
— Semiconductor Machinery Manufacturing
- Contracting Office
- Department of Commerce, National Institute of Standards and Technology (NIST), Acquisition Management Division, 100 Bureau Drive, Building 301, Room B129, Mail Stop 1640, Gaithersburg, Maryland, 20899-1640, United States
- ZIP Code
- 20899-1640
- Solicitation Number
- SB1341-13-RQ-0553
- Archive Date
- 7/25/2013
- Point of Contact
- Paula Wilkison, Phone: 301-975-8448, Patrick Staines, Phone: (301)975-6335
- E-Mail Address
-
paula.wilkison@nist.gov, patrick.staines@nist.gov
(paula.wilkison@nist.gov, patrick.staines@nist.gov)
- Small Business Set-Aside
- N/A
- Description
- THIS IS A COMBINED SYNOPSIS/SOLICITATION FOR COMMERCIAL ITEMS PREPARED IN ACCORDANCE WITH THE FORMAT IN FAR SUBPART 12.6-STREAMLINED PROCEDURES FOR EVALUATION AND SOLICITATION FOR COMMERCIAL ITEMS-AS SUPPLEMENTED WITH ADDITIONAL INFORMATION INCLUDED IN THIS NOTICE. THIS ANNOUNCEMENT CONSTITUTES THE ONLY SOLICITATION; QUOTATIONS ARE BEING REQUESTED, AND A SEPARATE WRITTEN SOLICITATION DOCUMENT WILL NOT BE ISSUED. THE SOLICITATION IS BEING ISSUED USING SIMPLIFIED ACQUISITION PROCEDURES UNDER THE AUTHORITY OF FAR 13.5 TEST PROGRAM FOR CERTAIN COMMERCIAL ITEMS. This solicitation is a Request for Quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-67, effective June 21, 2013. 1352.215-72 INQUIRIES (APR 2010) Offerors must submit all questions concerning this solicitation in writing to the Contracting Officer. Questions should be received no later than ten calendar days after the issuance date of this solicitation. Any responses to questions will be made in writing, without identification of the questioner, and will be included in an amendment to the solicitation. Even if provided in other form, only the question responses included in the amendment to the solicitation will govern performance of the contract. (end of provision) The associated North American Industrial Classification System (NAICS) code for this procurement is 333242 with a small business size standard of 500 employees. This requirement is unrestricted and all interested Contractors may submit a quotation. All offerors shall provide a quotation for the following line item: Line Item 0001: One (1) Manual Wedge Wire Bonder Introduction The contractor shall furnish the necessary personnel, material, equipment, and services to fabricate and deliver one Manual Wedge Wire Bonder. Background The Center for Nanoscale Science and Technology (CNST) at the National Institute for Standards and Technology (NIST) has a requirement for a Manual Wedge Wire Bonder to support nanofabrication in the Center for Nanoscale Science and Technology (CNST), NIST's nanotechnology user facility. The system will be sited and used in the CNST NanoFab as a shared resource accessible to researchers from industry, academia, NIST, and other government agencies. The tool shall be capable of attaching very fine conducting wires to microchips, electronic packages, and circuit boards. The wire is held in a capillary tube terminated by wedge-shaped tip which, through pressure and ultra-sonic energy, welds the wire in the desired locations. Minimum Requirements The system shall meet or exceed the technical specifications identified below. All items must be new. Prototypes, demonstration models, used or refurbished instruments will not be considered for award. Line Item 0001: One (1) Manual Wedge Wire Bonder, which shall meet or exceed the specifications identified below. 1. SYSTEM CONFIGURATION: The system shall be: a. Manually operated; b. A table-top model; c. Equipped with a single lever Z-manipulator; d. Equipped with electrostatic discharge (ESD) protection; e. Configured for wedge bonding on first and second bond; f. Capable of stitch bonding after second bond; 2. SYSTEM CAPABILITIES: a. The bonder head shall be able to switch between 45 degrees and 90 degrees wire feed; b. The bonder shall be capable of deep access where the bonding head shall travel in a vertical motion within a 0.5" range; c. The wedge shall be equipped with a radiant tool heater; d. The bonder shall accept wire with diameters from 20 micrometers through 50 micrometers; e. The wire spools shall be 12.5 mm (0.5 inch) in diameter; f. The bonder shall be capable of accepting both aluminum (Al-1 percent Si) and gold wire; g. The bonder shall be equipped with a 60 +/- 5 kHz, 1/2 wave transducer. 3. WORKHOLDER: a. The workholder shall be equipped with the following: i. An adjustable height platform with a minimum of 18 mm (0.75") vertical travel. This travel may be achieved on the workholder itself or via the tool main platform; ii. A heater with temperature controller capable of heating and controlling the workholder to 125 degrees C or hotter; iii. Shall be able to hold substrates up to 50 mm x 50 mm (2 inch x 2 inch); iv. Substrate capture via mechanical clamping and vacuum. 4. WIRE BOND CAPABILITIES a. The system shall have the following capabilities: i. Bond force adjustable from 10 g to 250 g; ii. Z-travel minimum range: 12.5 mm (0.5 inch). 5. MICROSCOPE a. The microscope shall be equipped with a stereo-zoom with a magnification of at least 50 X; b. The microscope shall be equipped with an LED ring illuminator. Express Warranty The contractor shall provide its standard commercial warranty. Delivery FOB Destination delivery terms are required, and shall take place in accordance with the Contractor's commercial schedule. The contractor shall deliver line item 0001 to NIST, Building 301, Shipping and Receiving, Gaithersburg, MD 20899-1640. PROVISIONS AND CLAUSES: The following provisions and clauses apply to this acquisition and are hereby incorporated by reference. All FAR clauses may be viewed at http://acquisition.gov/comp/far/index.html. Provisions 52.212-1, Instructions to Offerors-Commercial Items 52.212-3 Offeror Representations and Certifications-Commercial Items 52.225-18, Place of Manufacture; Offerors shall complete annual representations and certifications on-line at www.sam.gov in accordance with FAR 52.212-3 Offerors Representations and Certifications- Commercial Items. If paragraph (j) of the provision is applicable, a written submission is required. Representation by Corporations Regarding an Unpaid Delinquent Tax Liability or a Felony Conviction Under Any Federal Law (Class Deviation) (March 2012) (1) In accordance with Sections 543 and 544 of Public Law 112-55 Commerce, Justice, Science, and Related Agencies Appropriations Act 2012, Title V (General Provisions) none of the funds made available by that Act may be used to enter into a contract with any corporation that- (a) Was convicted of a felony criminal violation under any Federal law within the preceding 24 months, unless the agency has considered suspension or debarment of the corporation and made a determination that this further action is not necessary to protect the interests of the Government. (b) Has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, unless the agency has considered suspension or debarment of the corporation and made a determination that this further action is not necessary to protect the interests of the Government. (2) The Offeror represents that, as of the date of this offer - (a) It is [ ] is not [ ] a corporation that was convicted of a felony criminal violation under a Federal law within the preceding 24 months. (b) It is [ ] is not [ ] a corporation that has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreements with the authority responsible for collecting the tax liability. (End of provision) Clauses 52.212-4 Contract Terms and Conditions-Commercial Items 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items-Commercial Items including subparagraphs: 52.204-10, Reporting Executive Compensation; 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment; 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations; 52.219-28, Post Award Small Business Program Re-representation; 52.222-3, Convict Labor; 52.222-19, Child Labor - Cooperation With Authorities And Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.223-18, Contractor Policy to Ban Text Messaging While Driving; 52.225-3, Buy American Act - Free Trade Agreements; 52.225-13, Restriction on Certain Foreign Purchases; 52.225-25, Prohibition on Contracting with Entities Engaging in Sanctioned Activities Relating to Iran; 52.232-33, Payment by Electronic Funds Transfer 52.247-34, FOB Destination 1352.201-70, Contracting Officer's Authority 1352.201-72. Contracting Officer's Representative (COR) 1352.209-73, Compliance With the Laws 1352.209-74, Organizational conflict of interest 1352.246-70, Place of Acceptance (APR 2010) (a) The Contracting Officer or the duly authorized representative will accept supplies and services to be provided under this contract. (b) The place of acceptance will be: NIST, 100 Bureau Drive, Gaithersburg, Maryland, 20899 INSTRUCTIONS: System for Award Management Registration In accordance with FAR 52.204-99 (September 2012) (DEVIATION), the awardee must be registered in the System for Award Management (www.sam.gov) prior to award. Refusal to register shall forfeit award. Due Date for Quotations Offerors shall submit their quotations so that NIST receives them not later than 3:00 p.m. Eastern Time on July 10, 2013. FAX quotations shall not be accepted. E-mail quotations shall be accepted at paula.wilkison@nist.gov. Please reference the RFQ number in the subject line of email communications. Offerors' quotations shall not be deemed received by the Government until the quotation is entered in the e-mail inbox set forth above. Quotations shall be sent to the National Institute of Standards and Technology, Acquisition Management Division, Attn: Paula Wilkison, 100 Bureau Drive, Mail Stop 1640, Gaithersburg, MD 20899-1640. All offerors should ensure the RFQ number is visible on the outermost packaging. Because of heightened security, FED-EX, UPS, or similar delivery methods are the preferred method of delivery of quotes. If quotes are hand delivered, delivery shall be made on the actual due date through Gate A, and a 48 hour (excluding weekends and holidays) prior notice shall be provided to Paula Wilkison, Contract Specialist on 301-975-8448. Addendum to FAR 52.212-1, Quotation Preparation Instructions 1) Price Quotation: The offeror shall submit an original and one copy of the completed price schedule. If the quotation is submitted electronically, additional copies are not required. The pricing quotation shall be separate from any other portion of the quotation. The offeror shall propose a firm-fixed-price, FOB Destination, for each CLIN. Price quotations shall remain valid for a period of 90 days from the date quotations are due. 2) Technical Quotation: The offeror shall submit an original and one copy of the technical quotation. If the quotation is submitted electronically, additional copies are not required. The technical quotation shall address the following: Technical Capability: The offeror shall submit a technical description or product literature for the equipment it is proposing, which clearly identifies the manufacturer, make and model. The offeror must demonstrate that its proposed equipment meets or exceeds each minimum requirement described in the statement of work by providing a citation to the relevant section of its technical description or product literature. If applicable, evidence that the Offeror is authorized by the original equipment manufacturer to provide the item(s) in the quotation should be included. 3) Experience: The offeror shall demonstrate the extent to which it has recently manufactured, distributed, and installed similar equipment. The vendor shall describe the size of the user base of similar systems and number of systems sold in the past three years. The vendor shall have at least one similar system installed in a multi-user facility. 4) Past Performance: The offeror shall provide past performance information regarding relevant contracts over the past five (5) years with Federal, state, or local governments, or commercial customers. If the offeror intends to subcontract with another firm(s) for part of this requirement, that firm's past performance information shall also be provided. If the offeror has no relevant past performance, it may include a statement to that effect in its quotation. The government reserves the right to consider data obtained from sources other than those described by the offeror in its quotation. It is recommended that approximately 3-5 contracts be referenced. The description of each contract/order described in this section shall not exceed one half page in length. For each contract/order, the offeror shall provide the following information: 1. Contract number; 2. Description and relevance to solicitation requirements including dollar value; 3. Period of Performance - indicate by month and year the state and completion (or "ongoing") dates for the contract; 4. Reference Contact - If a non-Government contract, identify the name and address of the client with current telephone number and email address of a point of contact of the client responsible for the contract; 5. Contracting Office - If a Government contract (Federal or state), identify the Procuring Contracting Officer (PCO), administrative Contracting Officer (ACO), and Contracting Officer's Representative (COR), and their names, current telephone numbers and email addresses. 6. Problems Encountered - include information regarding information regarding any problems encountered on the contracts described above and corrective actions taken to resolve those problems. Acceptance of Terms and Conditions (Addendum to FAR 52.212-1 (b) (11)): This is an open-market solicitation for equipment as defined herein. The Government intends to award a Purchase Order as a result of this solicitation that will include the clauses set forth herein. The quotation should include one of the following statements: "The terms and conditions in the solicitation are acceptable to be included in the award document without modification, deletion, or addition." OR "The terms and conditions in the solicitation are acceptable to be included in the award document with the exception, deletion, or addition of the following: Offeror shall list exception(s) and rationale for the exception(s) Note: This procurement is not being conducted under the GSA Federal Supply Schedule (FSS) program or another Government-Wide Area Contract (GWAC). If an offeror submits a quotation based upon an FSS or GWAC contract, the Government will accept the quoted price. However, the terms and conditions stated herein will be included in any resultant Purchase Order, not the terms and conditions of the offeror's FSS or GWAC contract, and the statement required above shall be included in the quotation. QUOTATION EVALUATION: Evaluation Factors Award shall be made to the offeror whose quotation offers the best value to the Government price and other factors considered. The Government will evaluate quotations based on the following evaluation criteria: 1) Technical Capability 2) Experience, 3) Past Performance, and 4) Price. All non-price factors, when combined, are approximately equal to price. Technical Capability: All items must be new. Prototypes, demonstration models, used or refurbished instruments will not be considered for award. Evaluation of technical capability shall be based on the information provided in the quotation. NIST will evaluate whether the offeror has demonstrated that its proposed equipment meets or exceeds all minimum requirements. Quotations that do not demonstrate the proposed equipment meets all requirements will not be considered further for award. If an offeror does not indicate whether its proposed equipment meets a certain minimum requirement, NIST will determine that it does not. NIST will give preference to offerors who demonstrate that their proposed equipment exceeds NIST's requirements. Experience: NIST will evaluate the extent of the offeror's experience providing similar equipment. The Offeror shall demonstrate the extent to which it has recently manufactured and distributed similar equipment. Past Performance: The Government will evaluate the Offeror's past performance information and, if appropriate, its proposed subcontractors' past performance to determine its relevance to the current requirement and the extent to which it demonstrates that the offeror has successfully completed relevant contracts in the past five years. In assessing the offeror's past performance information, NIST will evaluate, as appropriate, successful performance of contract requirements, quality and timeliness of delivery of goods and services, cost management, communications between contracting parties, proactive management and customer satisfaction.. Evaluation of this factor will be based on information contained in the technical portion of the quotation and information provided by references. The Government will evaluate past performance information by contacting appropriate references, including NIST references, if applicable. The Government may also consider other available information in evaluating the Offeror's past performance. The Government will assign a neutral rating if the offeror has no relevant past performance information. Price: The Government will evaluate price for reasonableness. 1352.233-70 AGENCY PROTESTS (APR 2010) (a) An agency protest may be filed with either (1) the Contracting Officer, or (2) at a level above the Contracting Officer, with the agency Protest Decision Authority. See 64 Fed. Reg. 16,651 (April 6, 1999). (b) Agency protests filed with the Contracting Officer shall be sent to the following address: NIST/ACQUISITION MANAGEMENT DIVISION ATTN: PATRICK STAINES, CONTRACTING OFFICER 100 Bureau Drive, MS 1640 Gaithersburg, MD 20899 (c) Agency protests filed with the Protest Decision Authority shall be sent to the following address: NIST/ACQUISITION MANAGEMENT DIVISION ATTN: HEAD OF THE CONTRACTING OFFICE (HCO) 100 Bureau Drive, MS 1640 Gaithersburg, MD 20899 (d) A complete copy of all agency protest, including all attachments, shall be served upon the Contract Law Division of the Office of the General Counsel within one day of filing a protest with either the Contracting Officer or the Protest Decision Authority. (e) Service upon the Contract law Division shall be made as follows: U.S. Department of Commerce Office of the General Counsel Chief, Contract Law Division Room 5893 Herbert C. Hoover Building 14th Street and Constitution Avenue, N.W. Washington, D.C. 20230 FAX: (202) 482-5858 1352.233-71 GAO AND COURT OF FEDERAL CLAIMS PROTESTS (APR 2010) (a) A protest may be filed with either the Government Accountability Office (GAO) or the Court of Federal Claims unless an agency protest has been filed. (b) A complete copy of all GAO or Court of Federal Claims protests, including all attachments, shall be served upon (i) the Contracting Officer, and (ii) the Contract Law Division of the Office of the General Counsel, within one day of filing a protest with either GAO or the Court of Federal Claims. (c) Service upon the Contract Law Division shall be made as follows: U.S. Department of Commerce Office of the General Counsel Chief, Contract Law Division Room 5893 Herbert C. Hoover Building 14th Street and Constitution Avenue, N.W. Washington, D.C. 20230 FAX: (202) 482-5858 (End of clause)
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOC/NIST/AcAsD/SB1341-13-RQ-0553/listing.html)
- Place of Performance
- Address: TBD, United States
- Record
- SN03100795-W 20130628/130626235854-696b7790693e1f8f58f5b16e72cae81a (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |