Loren Data's FBO Daily™

fbodaily.com
Home Today's FBO Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY - FEDBIZOPPS ISSUE OF JUNE 07, 2013 FBO #4213
MODIFICATION

J -- Overhead Crane Services

Notice Date
6/5/2013
 
Notice Type
Modification/Amendment
 
NAICS
811310 — Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
 
Contracting Office
MICC Center - Yuma Proving Ground, KO Directorate of Contracting, 301 C Street BLDG 2100 RM 8, Yuma, AZ 85365-9498
 
ZIP Code
85365-9498
 
Solicitation Number
W9124R13T0125
 
Response Due
6/10/2013
 
Archive Date
8/4/2013
 
Point of Contact
LaTasha A. Isaac, 928-328-6162
 
E-Mail Address
MICC Center - Yuma Proving Ground
(latasha.a.isaac.civ@mail.mil)
 
Small Business Set-Aside
Total Small Business
 
Description
Amendment 0002 is being issued to provide answers to industry's questions as followed: 1) How high is each crane? A: I do not have the data on the height of ea of the 63 cranes at YPG. I do know that the highest crane is approximately 30 to 40 ft up to the base and it requires a boom lift to reach it. The remainder of the cranes can be reached with a scissor lift, there are 5 to 6 cranes have ladder access and some of the hoists that can be reached with a regular ladder. 2) Do I have access to each crane? A: There is access to the cranes with reasonable advanced notice for the QAE to arrange for the access. It will require the use of a scissor lift, boom lift and a ladder to access them and escort is required to accompany the technician. 3) Do I need a scissor lift or Boom lift for each crane? Or both? A: It will require a boom lift for one crane and a scissor lift for many of the other cranes. 4) Can we submit the proposal electronically? A: Yes, it is preferred. 5) Annual inspections require a load test, are just when the Gov request it. A: It is not required to perform a load test during an annual inspection. Function tests are required for approximately eight Hoists in the Ammo division consisting of lifting a characteristic load holding it at a appropriate height for one minute, maneuvering it in a manner which will simulate the operation of the lifting device with an inert item equal to or heavier than the heaviest item normally lifted as its characteristic load and lower it to its original position. The inert weight should be no more than 300lbs. Load tests will be performed at the request of the government when major repair are performed on the cranes. 6) What rental equipment needed to get to crane or are you going to provide it. A: YPG will not supply the equipment and it is up to the awarded contractor as to the preference of the equipment it will rent. It will be necessary to reach one crane, to have equipment that will safely reach forty feet, most other cranes 20 plus feet. 7) On the Annual Inspections is Load Testing required as part of the inspection or is this going to be a the government's request. A: It is not required to perform a load test during an annual inspection. Function tests are required for approximately eight Hoists in the Ammo division consisting of lifting a characteristic load holding it at a appropriate height for one minute, maneuvering it in a manner which will simulate the operation of the lifting device with an inert item equal to or heavier than the heaviest item normally lifted as its characteristic load and lower it to its original position. The inert weight should be no more than 300lbs. Load tests will be performed at the request of the government when major repair are performed on the cranes. 8) What are the acceptable means for delivery of the Quotation for this RFQ. A: An acceptable means of delivery would be electronic submissions. 9) Confirmation of Wage determination for service contract: 23530 - Machinery Maintenance Mechanic $ 24.66 23580 - Maintenance and Trades Helper $ 15.06 We will be submitting a bid based on the above classifications and rates. Are these the established rates to use for this contract? A: The wage determination is the minimum paid by contractors and subcontractors to laborers and mechanics in the Yuma, Arizona. The contractor is required to propose the labor categories and rates.
 
Web Link
FBO.gov Permalink
(https://www.fbo.gov/notices/77859a8618b682c09d3d72d187d04719)
 
Place of Performance
Address: MICC Center - Yuma Proving Ground KO Directorate of Contracting, 301 C Street BLDG 2100 RM 8 Yuma AZ
Zip Code: 85365-9498
 
Record
SN03080015-W 20130607/130606000318-77859a8618b682c09d3d72d187d04719 (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  © 1994-2016, Loren Data Corp.