FBODaily.com | FedBizOpps: PRESOL | 58 | AUDIO VISUAL PRESENTATION EQUIP - JA FOR NO SET ASIDE

FBO DAILY - FEDBIZOPPS ISSUE OF FEBRUARY 06, 2013 FBO #4092
SOLICITATION NOTICE

58 -- AUDIO VISUAL PRESENTATION EQUIP - JA FOR NO SET ASIDE

Notice Date: 2/4/2013
Notice Type: Combined Synopsis/Solicitation
NAICS: 334220 — Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing
Contracting Office: Other Defense Agencies, Defense Media Activity, DMA Acquisition and Procurement CA, 23755 Z Street, Riverside, California, 92518-2031, United States
ZIP Code: 92518-2031
Solicitation Number: HQ002823197000
Point of Contact: Claudio T. Casupang, Phone: 9514132381, Susan M. Madrid, Phone: 951-413-2371
E-Mail Address: claudio.casupang@dma.mil, susan.madrid@dma.mil
(claudio.casupang@dma.mil, susan.madrid@dma.mil)
Small Business Set-Aside: N/A
Description: BID SHEET HQ002823197000 HQ002823197000 BID SHEET SYNOPSIS/SOLICITATION: HQ002823197000 All equipment shall be NEW and include manufacturer warrranty information. Remanufactured/ refurbished equipment is not acceptable. NOTE: Please provide MANUFACTURING LOCATION of items in bid response, as well as DESCRIPTIVE LITERATURE if offer includes " OR EQUAL" product(s). Quotes are "ALL OR NONE"; quotes must be valid for 30 calendar days after submission. Delivery to be completed in ONE shipment, unless otherwise specified by Contracting Officer at time of award. SET ASIDE: NO SET ASIDE USED NAICS 334220/ SIZE STADARD 750 EMPLOYEES DPAS RATING DO-A7 OPENING DATE: 4 FEB 2013 CLOSING DATE 19 FEB 2013 2:00 PM (PST) INQUIRIES: All inquiries concerning any phase of this project shall be made to CLAUDIO CASUPANG, CONTRACT SPECIALIST, (951) 413- 2381 at the AFN-BC, DMA Contracting, 23755 Z Street, Riverside, CA 92518. ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT 0001 5 Each FSC: 7025 Name: DISPLAY BOARD Part Number: SBID8070I-SMP FFP Description: INTERACTIVE; SIZE: 70-IN DIAGONAL; WITH SMART MEETING PRO; ASPECT RATIO: 16:9; RECOGNIZE FINGER, PEN OR ERASER TOUCH; SUPPORTS MULTI-TOUCH GESTURES; DISPLAY SPECIFICATIONS: 0.807-MM PIXEL PITCH, 1300:1 CONTRAST RATIO, 430-CD/M2 MAXIMUM BRIGHTNESS, 31.5-KHZ TO 91.1-KHZ HORIZONTAL FREQUENCY, 50.0-HZ TO 85.0-HZ VERTICAL FREQUENCY; 1920 1080 AT 60-HZ OPTIMUM RESOLUTION; VESA 400-MM 400-MM MOUNTING HOLES; AUDIO INPUT: USB, RCA L/R, STEREO 3.5-MM MINI JACK; 2-EA 15-W SPEAKERS; C/W: USB CABLE, VGA CABLE, INFRARED REMOTE CONTROL, SMART NOTEBOOK SOFTWARE; DESIGNED TO WITHSTAND ELECTROSTATIC SHOCK; PWR RQMT: 100-240VAC, 50-60HZ. FOB: Destination NSN: 7025-01-P65-1432 MILSTRIP: M5400422720006 PURCHASE REQUEST NUMBER: HQ002823197000 PROJECT: 317 LI: 114 NET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT 0002 10 Each FSC: 5965 Name: SPEAKER Part Number: 42-103-03 FFP Description: FULL RANGE CEILING; COLOR: WHITE; 4-IN DEEP LOW PROFILE METAL BACK CAN FOR PLENUM ENVIRONMENTS; 3-IN FULL RANGE DRIVER WITH A TUNED PORT; 8-OHM DIRECT OR 70/100-VOLT OPERATION ON A 6-POSITION BEHIND-THE- GRILLE SELECTOR(W/ INCLUDED TRANSFORMER); FREQUENCY RESPONSE: 75-HZ TO 17-KHZ; 16-WATTS CONTINUOUS PINK NOISE, 32-WATTS CONTINUOUS PROGRAM; LOCKING ARMS FOR QUICK CEILING INSTALLATION; C/W: C-RING & V-RAIL KIT; C/W: 2-EA SPEAKERS/HARDWARE; 5-YR PARTS AND LABOR WARRANTY. FOB: Destination NSN: 5965-01-P65-1440 MILSTRIP: M5400422720007 PURCHASE REQUEST NUMBER: HQ002823197001 PROJECT: 317 LI: 115 NET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT 0003 5 Each FSC: 5820 Name: DISC PLAYER Part Number: DBP-2012UDCIP FFP Description: UNIVERSAL BLURAY ; RACK MOUNTABLE(4RU); PLAYS BLU- RAY, SACD, CD & DVD DISCS; 3D VIDEO PLAYBACK; INTERLACED TO PROGRESSIVE SCALING; DEEP COLOR AND X.V. COLOR SUPPORT; MUSIC & VIDEO FILE SUPPORT; HDMI CONTROL; NTSC/PAL; FULL HD 1080P/24 VIDEO OUTPUT; DOLBY DIGITAL/DTS COMPATIBILITY: DOLBY DIGITAL PLUS, DOLBY TRUEHD, DTS, DTS-HD MASTER AUDIO; BUILT IN DOLBY DECODER; AUDIO D/A CONVERTER: 192KHZ/32BIT; LPCM: YES; AUDIO SIGNAL TO NOISE RATIO: 125DB; DYNAMIC RANGE: 110DB; AUDIO TOTAL HARMONIC DISTORTION: 0.0008%; CRESTRON THIRD PARTY CONTROL SUPPORT VIA RS-232C; C/W: 1EA REMOTE CONTROL(RC- 1151), 2EA X R6/AA BATTERIES, AUDIO & VIDEO CABLE(4.9FT/1.5M), AC POWER CORD (6.6FT/2.0M), SERVICE STATION LIST, OWNER'S MANUAL 4RU RACK KIT, 1YR MANUFACTURERS WARRANTY; PWR RQMNT: 120VAC, 60HZ FOB: Destination NSN: 5820-01-P65-1037 MILSTRIP: M5400422720008 PURCHASE REQUEST NUMBER: HQ002823197002 PROJECT: 317 LI: 116 NET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT 0004 5 Each FSC: 5975 Name: RACK Part Number: PTRK-2726MDK FFP Description: 27 SPACE, 26-IN DEEP PORTATABLE ROLLING RACK W/PLEXI FRONT DOORS AND MARBLED-GRAPHITE LAMINATED TOP; 18- GAUGE STEEL (PANELS); 16-GAUGE STEEL (DOORS); 11-GAUGE STEEL (RACK RAILS); WOOD WITH GRAPHITE LAMINATE (TOP); PLEXI (FRONT DOOR); BLACK TEXTURED POWDER COAT (RACK COMPONENT); BLACK MARBLE (TOP); CABINET-24.5-IN USEABLE DEPTH; MOBILITY-CASTERS; 52.42 X 22.59 X 27.91-IN; 57.45-IN HEIGHT W/CASTERS; WEITHT CAPACITY-500LBS. FOB: Destination NSN: 5975-01-P65-1477 MILSTRIP: M5400422720009 PURCHASE REQUEST NUMBER: HQ002823197003 PROJECT: 317 LI: 117 NET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT 0005 10 Each FSC: 6150 Name: POWER STRIP Part Number: PD-920RC-20 FFP Description: 9 NEMA 5-20R OUTLETS (1 FRONT, 8 REAR), SINGLE 20AMP; RACKMOUNT (1RU); CIRCUIT BREAKER AND POWER SWITCH LOCATED IN FRONT; NEMA 5-20P POWER TYPE CORD; BLACK TEXTURED POWDER COAT FINISH; 20FT POWER CORD; PWR RQMNTS: 120V, 50/60HZ. FOB: Destination NSN: 6150-01-P65-1480 MILSTRIP: M5400422720010 PURCHASE REQUEST NUMBER: HQ002823197004 PROJECT: 317 LI: 118 NET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT 0006 5 Kit FSC: 5975 Name: RACK RAIL KIT Part Number: PTRK-RR27 FFP Description: REAR RACK RAIL KIT; C/O PAIR OF 11-GAUGE STEEL RACK RAILS FOR USE W/PTRK SERIES RACKS; FEATURES TAPPED 10-32 HOLES WITH UNIVERSAL EIA SPACING AND NUMBERED RACK SPACES; THREADS ARE COATED WITH A SPECIAL NON- CLOGGING E-COATING; THIS MODEL DESIGNED TO WORK IN 27U RACKS. FOB: Destination NSN: 5975-01-P65-1483 MILSTRIP: M5400422720011 PURCHASE REQUEST NUMBER: HQ002823197005 PROJECT: 317 LI: 119 NET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT 0007 3 Each FSC: 5340 Name: MOUNT Part Number: XTMU FFP Description: FUSION UNIVERSAL MICRO-ADJUSTABLE TILT WALL MOUNT (55-75-IN DISPLAYS); DEPTH FROM MOUNTING SOURCE: 1.99-IN; MAX EQUIPMENT SIZE: 55-75-IN; ADJUSTMENTS: PLUS OR MINUS 5-IN, TILT 12-IN; HOLE PATTERN: MAX HEIGHT 26-IN; MOUNTING: MIN WALL STUD SPACING 24-IN (MUST SPAN 3 STUDS ON 16-IN ON-CENTER WALL); WEIGHT CAPACITY: 250LBS. Suggested Source of Supply: 34LX0 3F604 2Y053 FOB: Destination NSN: 5340-01-P65-1465 MILSTRIP: M5400422720013 PURCHASE REQUEST NUMBER: HQ002823197006 PROJECT: 317 LI: 120 NET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT 0008 3 Each FSC: 5820 Name: MIXER Part Number: 910-151-881 FFP Description: PROFESSIONAL CONFERENCING SYSTEM; CONVERGE PRO 880T; 8 CHANNEL AEC MICROPHONE MIXER WITH BUILT-IN TELEPHONE HYBRID INTERFACE AND 10WPOWER AMPLIFIER; FULL BANDWITH (20HZ TO 22KHZ)ECHO CANCELLATION; PUSH-TO-TALK MICROPHONE CMPATIBILITY; INTEGRATED ETHERNET AND USB CONNECTIONS; SNMP AND HTML REMOTE MANAGEMENT; EVENT SCHEDULER; SIMPLIFIED CONFIGURATIONSOFTWARE; SCALABLE LINK MULTIPLE CONVERGE/CONVERGEPRO UNITS (CONVERGE PRO 880, 880T, 840T, 8I,TH20 AND CONVERGE SR 1212) FOR EXTENSIVEMICROPHONE CONVERGE AND UP TO 16 PHONE LINES;ENHANCE EXPANSION BUS, FEATURING 12 MIX-MINUSAUDIO BUSES FOR ROUTING BETWEEN UNITS; EIGHTMIC GATING GROUPS (FOUR INTERNAL AND FOUR GLOBAL); 32 PRESETS CAN BE EXECUTED ON-THE-FLY WITHOUT DISTURBING OTHER ONGOING PRESET OPERATIONS 255 MACROS FOR CUSTOMIZED AUDIO CONTROL/CONFIGURATION WITH SINGLE COMMAND EXECUTION; MATRIX MIXING PARAMETERS: 37X38 MIXING MATRIX 12 ANALOG IN/OUT, 12 EXPANSION BUT IN/OUT, 8 ASSIGNABLE PROCESSING BLOCKS IN/OUT 1 10W SPEAKER AMPLIFIER, 1 TELCO INPUT/1TELCO OUTPUT; PWR RQMTS: 100-240VAC, 50/60HZ. FOB: Destination NSN: 5820-01-P65-1469 MILSTRIP: M5400422720016 PURCHASE REQUEST NUMBER: HQ002823197007 PROJECT: 317 LI: 121 NET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT 0009 4 Each FSC: 7730 Name: TELEVISION/MO Part Number: LC-80LE844U FFP Description: AQUOS SMART 3D 80-IN LED FLAT PANEL TV; ASPECT RATIO 6:9; COLOR BLACK; RESOLUTION 1920X1080; VIEWING ANGLE (H X V) 176-IN H X 176-IN V; ATSC, NTSC; HDTV COMPATIBILITY 1080P; SURROUND SOUND; POWER 20W; ORIENTATION FULLY INTEGRATED; INPUTS/OUTPUTS: 2 X USB 2.0 AUDIO/VIDEO IN; 4 X HDMI AUDIO/VIDEO IN; 1 X CA COMPONENT AUDIO/VIDEO IN; 2 X RCA COMPONENT AUDIO/VIDEO IN; 2 X RCA STEREO (L/R) AUDIO IN; 1 X RS 232C CONTROL IN; 1 X VGA VIDEO IN; 1 X ETHERNET LAN IN; 1 X DIGITAL COAXIAL AUDIO OUT; BUILT-IN WI-FI; REMOTE CONTROL; WALL MOUNTABLE; FFEATURES WEB BROWSER; 3D COMPATIBLE; PWR RQMNTS: 120VAC, 60HZ. FOB: Destination NSN: 7730-01-P65-1497 MILSTRIP: M5400422720033 PURCHASE REQUEST NUMBER: HQ002823197008 PROJECT: 317 LI: 122 NET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT 0010 3 Each FSC: 5820 Name: CAMERA SYSTEM Part Number: 999-6957-000 99-69 FFP Description: WALLVIEW CCU HD-20 PTZ CAMERA SYSTEM WITH QUICK CONNECT CCU; 20X OPTICAL ZOOM LENS W/HILD GLASS, F/1.6 WIDE TO F/3.5 TELE, 11 ELEMENTS IN 9 GROUPS; FOCAL LENGTH 4.7-94MM; HORIZONTAL VIEWING ANGLE 2.9-55.2 DEGREES (16:9 ASPECT RATIO); PAN PLUS/MINUS 70 DEGREES; TILT 30 TO PLUS 90 DEGREES; RS-220 INPUT TO CONTROL SYSTEMS; COMPONENT HD AND COMPOSITE SD OUTPUTS; RESOLUTIONS 1080I50/60, 720P50/60, 1080P30/25; HD VIDEO OUTPUTS YPBPR ON DB-15 HDMI; DVI/HDMI SR INTERFACE; POWER CONNECTOR RJ-R5 JACK; HD VIDEO YPBPR ON RJ-45 JACK; POWER CONNECTOR 5.5MM OD, 2.5MM ID; POWER RJ-45 SUPPLIES 36V TO EZIM CCU SLOT CARD ON CAMERA; RS-232 IN RJ-45 ACCEPTS BI-DIRECTIONAL RS-232 CONTROLLER INFORMATION; VIDEO RJ-45 TRANSPORTS HSDS (DIFF) VIDEO FROM CAMERA EZIM CCU SLOT CARD; 16 POSITION ROTARY SWITHCH USED TO SET HD VIDEO RESULUTION OUTPUT; 10 POSITION DIP SWITCH SETTING TO IR SELECT, BAUD RATE 9600, IMAGE FLIP, CAT-5E CABLE DISTANCE UP TO 500FT; PWR RQMNTS: 36VDC, 2.78A FOB: Destination NSN: 5820-01-P65-1474 MILSTRIP: M5400422720034 PURCHASE REQUEST NUMBER: HQ002823197009 PROJECT: 317 LI: 123 NET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT 0011 3 Each FSC: 5820 Name: CAMERA CONSOL Part Number: 999-5625-000 FFP Description: PRODUCTION VIEW HD MV CAMERA CONTROL CONSOLE; COMPATIBLE W/CAMERAS: VADDIO CLEARVIEW HD SERIES PTZ, VADDIO WALLVIEW CCU AND PRO SERIES, VADDIO CEILINGVIEW 70 PTZ SERIES, VADDIO HIDEAWAY SERIES, VADDIO CEILINGVIEW DOCUMENT, VADDIO MODEL SERIES AND PTZCAM SERIES, SONY EVI AND SONY BRC SERIES, PANASONIC AW-GE 100, CANON VC-C50I AND VC-C50IR; 6X2 SEAMLESSSWITCHER (OR TWO 6X1 IN DUAL MODE); PTZ JOYSTICK AND CCU CONTROL KNOB; 12 PRESETS FOR EACH OF 6 PTZ CAMERAS; SIGNAL SYSTEM NTSC AND PAL; MULTIVIEW CAPABILITIES; RGBHV, HD AND SD VIDEO MIXING; SIGNAL FORMATS UP TO 1080P60; LOWER-THIRD GRAPHICS INSERTION; VGA, COMPONENT, COMPOSITE, S-VIDEO INPUT; DV-1 INPUT FOR RGB, DVI-D AND HDMI, COMPONENT/COMPOSITE/S-VIDEO AND DVI-D OUTS; 8 LINE BACKLIT LCD DISPLAY: INPUT RESOLUTIONS: 720X400 (NTSC), 720X576 (PAL, COMPUTER UP TO 1920X1200 AT 60MZ; PWR RQMTS: 18C, 2.78A. FOB: Destination NSN: 5820-01-P65-1476 MILSTRIP: M5400422720035 PURCHASE REQUEST NUMBER: HQ002823197010 PROJECT: 317 LI: 124 NET AMT GRAND TOTAL OF QUOTE __________________ INSPECTION AND ACCEPTANCE TERMS Supplies/services will be inspected/accepted at: CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY 0001 Destination Government Destination Government 0002 Destination Government Destination Government 0003 Destination Government Destination Government 0004 Destination Government Destination Government 0005 Destination Government Destination Government 0006 Destination Government Destination Government 0007 Destination Government Destination Government 0008 Destination Government Destination Government 0009 Destination Government Destination Government 0010 Destination Government Destination Government 0011 Destination Government Destination Government DELIVERY INFORMATION CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS UIC 0001 30 dys. ADC 5 M54004 SUPPLY OFFICER SCOTT FIDLER MYER/HENDERSON HALL 1555 SOUTHGATE RD BLDG 28 ARLINGTON VA 22214-5000 (703) 693-9527 FOB: Destination M54004 0002 30 dys. ADC 10 (SAME AS PREVIOUS LOCATION) FOB: Destination M54004 0003 30 dys. ADC 5 (SAME AS PREVIOUS LOCATION) FOB: Destination M54004 0004 30 dys. ADC 5 (SAME AS PREVIOUS LOCATION) FOB: Destination M54004 0005 30 dys. ADC 10 (SAME AS PREVIOUS LOCATION) FOB: Destination M54004 0006 30 dys. ADC 5 (SAME AS PREVIOUS LOCATION) FOB: Destination M54004 0007 30 dys. ADC 3 (SAME AS PREVIOUS LOCATION) FOB: Destination M54004 0008 30 dys. ADC 3 (SAME AS PREVIOUS LOCATION) FOB: Destination M54004 0009 30 dys. ADC 4 (SAME AS PREVIOUS LOCATION) FOB: Destination M54004 0010 30 dys. ADC 3 (SAME AS PREVIOUS LOCATION) FOB: Destination M54004 0011 30 dys. ADC 3 (SAME AS PREVIOUS LOCATION) FOB: Destination M54004 CLAUSES INCORPORATED BY REFERENCE 52.203-13 Contractor Code of Business Ethics and Conduct APR 2010 52.204-99 (Dev) System for Award Management Registration (Deviation) AUG 2012 52.212-1 Instructions to Offerors--Commercial Items FEB 2012 52.212-4 Contract Terms and Conditions--Commercial Items FEB 2012 52.222-50 Combating Trafficking in Persons FEB 2009 52.232-23 Assignment Of Claims JAN 1986 52.232-33 Payment by Electronic Funds Transfer--Central Contractor Registration OCT 2003 52.233-1 Disputes JUL 2002 52.233-3 Protest After Award AUG 1996 52.246-1 Contractor Inspection Requirements APR 1984 52.247-34 F.O.B. Destination NOV 1991 52.253-1 Computer Generated Forms JAN 1991 252.204-7004 Alt A Central Contractor Registration Alternate A SEP 2007 252.212-7001 (Dev) Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items (Deviation) DEC 2010 252.225-7002 Qualifying Country Sources As Subcontractors JUN 2012 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports JUN 2012 252.243-7002 Requests for Equitable Adjustment MAR 1998 CLAUSES INCORPORATED BY FULL TEXT 52.0100-4094 MARKING INSTRUCTIONS FOR ALL ITEMS TO INCLUDE DROP SHIP AND DIRECT SHIPMENT (DMA)(OCT 2008) The Contractor shall attach two (2) copies of a detailed packing list with each box or container with unlike items where the full description of the contents is not authorized or cannot be shown. Include one (1) copy of the packing list inside the box or container and attach one (1) copy of the packing list on the outside of the box or container. The outside of the box or container must also include the complete shipping address as provided in the schedule and the Contract/Purchase/Delivery Order number located on Page 1 of this document. The packing list shall contain the following information: (a) Contract number/Purchase Order number or Delivery Order number (b) Package number and set number (if any) of the container. (c) A list of the contents which shows the quantity by item, item description, part number, type and size, unit of issue if other than each. NOTE! The government WILL NOT ACCEPT items shipped without a packing list especially when the content of the package is unidentifiable; rejected items will be returned at the contractor's expense. INCOMPLETE DELIVERIES Incomplete delivery refers to the incomplete shipment of a unit of issue of an individual contract line item (CLIN). Such Incomplete, or fragmented delivery of any part of a CLIN is not authorized and will not be accepted. Each item (CLIN), including all components and sub-items, is to be delivered complete. Where sub-line items are reflected as component parts of an item, all sub-line items must be delivered simultaneously to form the complete item. (End of Local Instruction) 52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL ITEMS (APR 2012) An offeror shall complete only paragraph (b) of this provision if the offeror has completed the annual representations and certifications electronically via https://www.acquisition.gov. If an offeror has not completed the annual representations and certifications electronically at the ORCA website, the offeror shall complete only paragraphs (c) through (o) of this provision. (a) Definitions. As used in this provision -- "Economically disadvantaged women-owned small business (EDWOSB) Concern" means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program. "Forced or indentured child labor" means all work or service- (1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or (2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties. Inverted domestic corporation, as used in this section, means a foreign incorporated entity which is treated as an inverted domestic corporation under 6 U.S.C. 395(b), i.e., a corporation that used to be incorporated in the United States, or used to be a partnership in the United States, but now is incorporated in a foreign country, or is a subsidiary whose parent corporation is incorporated in a foreign country, that meets the criteria specified in 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c). An inverted domestic corporation as herein defined does not meet the definition of an inverted domestic corporation as defined by the Internal Revenue Code at 26 U.S.C. 7874. Manufactured end product means any end product in Federal Supply Classes (FSC) 1000-9999, except-- (1) FSC 5510, Lumber and Related Basic Wood Materials; (2) Federal Supply Group (FSG) 87, Agricultural Supplies; (3) FSG 88, Live Animals; (4) FSG 89, Food and Related Consumables; (5) FSC 9410, Crude Grades of Plant Materials; (6) FSC 9430, Miscellaneous Crude Animal Products, Inedible; (7) FSC 9440, Miscellaneous Crude Agricultural and Forestry Products; (8) FSC 9610, Ores; (9) FSC 9620, Minerals, Natural and Synthetic; and (10) FSC 9630, Additive Metal Materials. Place of manufacture means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture. Restricted business operations means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate-- (1) Are conducted under contract directly and exclusively with the regional government of southern Sudan; (2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization; (3) Consist of providing goods or services to marginalized populations of Sudan; (4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization; (5) Consist of providing goods or services that are used only to promote health or education; or (6) Have been voluntarily suspended. Sensitive technology-- (1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically-- (i) To restrict the free flow of unbiased information in Iran; or (ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and (2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)). Service-disabled veteran-owned small business concern-- (1) Means a small business concern-- (i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and (ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran. (2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16). "Small business concern" means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and size standards in this solicitation. Subsidiary means an entity in which more than 50 percent of the entity is owned-- (1) Directly by a parent corporation; or (2) Through another subsidiary of a parent corporation. Veteran-owned small business concern means a small business concern-- (1) Not less than 51 percent of which is owned by one or more veterans (as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and (2) The management and daily business operations of which are controlled by one or more veterans. "Women-owned business concern" means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and whose management and daily business operations are controlled by one or more women. "Women-owned small business concern" means a small business concern-- (1) That is at least 51 percent owned by one or more women or, in the case of any publicly owned business, at least 51 percent of its stock is owned by one or more women; or (2) Whose management and daily business operations are controlled by one or more women. Women-owned small business (WOSB) concern eligible under the WOSB Program (in accordance with 13 CFR part 127)", means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States. (b) (1) Annual Representations and Certifications. Any changes provided by the offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications posted electronically on the Online Representations and Certifications Application (ORCA) website. (2) The offeror has completed the annual representations and certifications electronically via the ORCA website accessed through https://www.acquisition.gov. After reviewing the ORCA database information, the offeror verifies by submission of this offer that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications--Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ----------. [Offeror to identify the applicable paragraphs at (c) through (o) of this provision that the offeror has completed for the purposes of this solicitation only, if any.) These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer. Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on ORCA.] (c) Offerors must complete the following representations when the resulting contract will be performed in the United States or its outlying areas. Check all that apply. (1) Small business concern. The offeror represents as part of its offer that it ( ) is, ( ) is not a small business concern. (2) Veteran-owned small business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents as part of its offer that it ( ) is, ( ) is not a veteran-owned small business concern. (3) Service-disabled veteran-owned small business concern. (Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.) The offeror represents as part of its offer that it ( ) is, ( ) is not a service-disabled veteran-owned small business concern. (4) Small disadvantaged business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents, for general statistical purposes, that it ( ) is, ( ) is not a small disadvantaged business concern as defined in 13 CFR 124.1002. (5) Women-owned small business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents that it ( ) is, ( ) is not a women-owned small business concern. Note to paragraphs (c)(8) and (9): Complete paragraphs (c)(8) and (c)(9) only if this solicitation is expected to exceed the simplified acquisition threshold. (6) WOSB concern eligible under the WOSB Program. [Complete only if the offeror represented itself as a women-owned small business concern in paragraph (c)(5) of this provision.] The offeror represents that-- (i) It [ ] is, [ ] is not a WOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and (ii) It [ballot] is, [ballot] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(6)(i) of this provision is accurate for each WOSB concern eligible under the WOSB Program participating in the joint venture. [The offeror shall enter the name or names of the WOSB concern eligible under the WOSB Program and other small businesses that are participating in the joint venture: ----------.] Each WOSB concern eligible under the WOSB Program participating in the joint venture shall submit a separate signed copy of the WOSB representation. (7) Economically disadvantaged women-owned small business (EDWOSB) concern. [Complete only if the offeror represented itself as a WOSB concern eligible under the WOSB Program in (c)(6) of this provision.] The offeror represents that-- (i) It [ballot] is, [ballot] is not an EDWOSB concern, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and (ii) It [ballot] is, [ballot] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(7)(i) of this provision is accurate for each EDWOSB concern participating in the joint venture. [The offeror shall enter the name or names of the EDWOSB concern and other small businesses that are participating in the joint venture: ----------.] Each EDWOSB concern participating in the joint venture shall submit a separate signed copy of the EDWOSB representation. (8) Women-owned business concern (other than small business concern). (Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents that it ( ) is, a women-owned business concern. (9) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price: _____________________________________________ (10) (Complete only if the solicitation contains the clause at FAR 52.219-23, Notice of Price Evaluation Adjustment for Small Disadvantaged Business Concerns or FAR 52.219-25, Small Disadvantaged Business Participation Program-Disadvantaged Status and Reporting, and the offeror desires a benefit based on its disadvantaged status.) (i) General. The offeror represents that either-- (A) It ( ) is, ( ) is not certified by the Small Business Administration as a small disadvantaged business concern and identified, on the date of this representation, as a certified small disadvantaged business concern in the CCR Dynamic Small Business Search database maintained by the Small Business Administration, and that no material change in disadvantaged ownership and control has occurred since its certification, and, where the concern is owned by one or more individuals claiming disadvantaged status, the net worth of each individual upon whom the certification is based does not exceed $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); or (B) It ( ) has, ( ) has not submitted a completed application to the Small Business Administration or a Private Certifier to be certified as a small disadvantaged business concern in accordance with 13 CFR 124, Subpart B, and a decision on that application is pending, and that no material change in disadvantaged ownership and control has occurred since its application was submitted. (ii) Joint Ventures under the Price Evaluation Adjustment for Small Disadvantaged Business Concerns. The offeror represents, as part of its offer, that it is a joint venture that complies with the requirements in 13 CFR 124.1002(f) and that therepresentation in paragraph (c)(10)(i) of this provision is accurate for the small disadvantaged business concern that is participating in the joint venture. (The offeror shall enter the name of the small disadvantaged business concern that is participating in the joint venture: ____________.) (11) HUBZone small business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents, as part of its offer, that-- (i) It [ ] is, [ ] is not a HUBZone small business concern listed, on the date of this representation, on the List of Qualified HUBZone Small Business Concerns maintained by the Small Business Administration, and no material changes in ownership and control, principal office, or HUBZone employee percentage have occurred since it was certified in accordance with 13 CFR Part 126; and (ii) It [ ] is, [ ] is not a HUBZone joint venture that complies with the requirements of 13 CFR Part 126, and the representation in paragraph (c)(11)(i) of this provision is accurate for each HUBZone small business concern participating in the HUBZone joint venture. [The offeror shall enter the names of each of the HUBZone small business concerns participating in the HUBZone joint venture: _______.] Each HUBZone small business concern participating in the HUBZone joint venture shall submit a separate signed copy of the HUBZone representation. (d) Certifications and representations required to implement provisions of Executive Order 11246-- (1) Previous Contracts and Compliance. The offeror represents that-- (i) It ( ) has, ( ) has not, participated in a previous contract or subcontract subject either to the Equal Opportunity clause of this solicitation, the and (ii) It ( ) has, ( ) has not, filed all required compliance reports. (2) Affirmative Action Compliance. The offeror represents that-- (i) It ( ) has developed and has on file, ( ) has not developed and does not have on file, at each establishment, affirmative action programs required by rules and regulations of the Secretary of Labor (41 CFR Subparts 60-1 and 60-2), or (ii) It ( ) has not previously had contracts subject to the written affirmative action programs requirement of the rules and regulations of the Secretary of Labor. (e) Certification Regarding Payments to Influence Federal Transactions (31 U.S.C. 1352). (Applies only if the contract is expected to exceed $150,000.) By submission of its offer, the offeror certifies to the best of its knowledge and belief that no Federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of Congress or an employee of a Member of Congress on his or her behalf in connection with the award of any resultant contract. If any registrants under the Lobbying Disclosure Act of 1995 have made a lobbying contact on behalf of the offeror with respect to this contract, the offeror shall complete and submit, with its offer, OMB Standard Form LLL, Disclosure of Lobbying Activities, to provide the name of the registrants. The offeror need not report regularly employed officers or employees of the offeror to whom payments of reasonable compensation were made. (f) Buy American Act Certificate. (Applies only if the clause at Federal Acquisition Regulation (FAR) 52.225-1, Buy American Act --Supplies, is included in this solicitation.) (1) The offeror certifies that each end product, except those listed in paragraph (f)(2) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of "domestic end product." The terms "commercially available off-the-shelf (COTS) item," "component," "domestic end product," "end product," "foreign end product," and "United States" are defined in the clause of this solicitation entitled "Buy American Act--Supplies." (2) Foreign End Products: Line Item No. Country of Origin ______________ _________________ ______________ _________________ ______________ _________________ (List as necessary) (3) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. (g)(1) Buy American Act-Free Trade Agreements-Israeli Trade Act Certificate. (Applies only if the clause at FAR 52.225-3, Buy American Act-Free Trade Agreements-Israeli Trade Act, is included in this solicitation.) (i) The offeror certifies that each end product, except those listed in paragraph (g)(1)(ii) or (g)(1)(iii) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The terms "Bahrainian, Moroccan, Omani, or Peruvian end product," "commercially available off-the-shelf (COTS) item," "component," "domestic end product," "end product," "foreign end product," "Free Trade Agreement country," "Free Trade Agreement country end product," "Israeli end product," and "United States" are defined in the clause of this solicitation entitled "Buy American Act-Free Trade Agreements-Israeli Trade Act." (ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Moroccan, Omani, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled ``Buy American Act--Free Trade Agreements--Israeli Trade Act'': Free Trade Agreement Country End Products (Other than Bahrainian, Moroccan, Omani, or Peruvian End Products) or Israeli End Products: Line Item No. Country of Origin ______________ _________________ ______________ _________________ ______________ _________________ [List as necessary] (iii) The offeror shall list those supplies that are foreign end products (other than those listed in paragraph (g)(1)(ii) of this provision) as defined in the clause of this solicitation entitled "Buy American Act-Free Trade Agreements-Israeli Trade Act." The offeror shall list as other foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of "domestic end product." Other Foreign End Products: Line Item No. Country of Origin ______________ _________________ ______________ _________________ ______________ _________________ [List as necessary] (iv) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. (2) Buy American Act-Free Trade Agreements-Israeli Trade Act Certificate, Alternate I (Jan 2004). If Alternate I to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision: (g)(1)(ii) The offeror certifies that the following supplies are Canadian end products as defined in the clause of this solicitation entitled "Buy American Act-Free Trade Agreements-Israeli Trade Act": Canadian End Products: Line Item No. _______________________________________ _______________________________________ _______________________________________ [List as necessary] (3) Buy American Act-Free Trade Agreements-Israeli Trade Act Certificate, Alternate II (Jan 2004). If Alternate II to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision: (g)(1)(ii) The offeror certifies that the following supplies are Canadian end products or Israeli end products as defined in the clause of this solicitation entitled "Buy American Act-Free Trade Agreements-Israeli Trade Act": Canadian or Israeli End Products: Line Item No. Country of Origin ______________ _________________ ______________ _________________ ______________ _________________ [List as necessary] (4) Buy American Act--Free Trade Agreements--Israeli Trade Act Certificate, Alternate III. If Alternate III to the clause at 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision: (g)(1)(ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Korean, Moroccan, Omani, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled ``Buy American Act--Free Trade Agreements--Israeli Trade Act'': Free Trade Agreement Country End Products (Other than Bahrainian, Korean, Moroccan, Omani, or Peruvian End Products) or Israeli End Products: Line Item No. Country of Origin ______________ _________________ ______________ _________________ ______________ _________________ [List as necessary] (5) Trade Agreements Certificate. (Applies only if the clause at FAR 52.225-5, Trade Agreements, is included in this solicitation.) (i) The offeror certifies that each end product, except those listed in paragraph (g)(5)(ii) of this provision, is a U.S.-made or designated country end product, as defined in the clause of this solicitation entitled "Trade Agreements." (ii) The offeror shall list as other end products those end products that are not U.S.-made or designated country end products. Other End Products: Line Item No. Country of Origin ______________ _________________ ______________ _________________ ______________ _________________ (List as necessary) (iii) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. For line items covered by the WTO GPA, the Government will evaluate offers of U.S.-made or designated country end products without regard to the restrictions of the Buy American Act. The Government will consider for award only offers of U.S.-made or designated country end products unless the Contracting Officer determines that there are no offers for such products or that the offers for such products are insufficient to fulfill the requirements of the solicitation. (h) Certification Regarding Responsibility Matters (Executive Order 12689). (Applies only if the contract value is expected to exceed the simplified acquisition threshold.) The offeror certifies, to the best of its knowledge and belief, that -- (1) The offeror and/or any of its principals ( ) are, ( ) are not presently debarred, suspended, proposed for debarment, or declared ineligible for the award of contracts by any Federal agency, (2) ( ) Have, ( ) have not, within a three-year period preceding this offer, been convicted of or had a civil judgment rendered against them for: commission of fraud or a criminal offense in connection with obtaining, attempting to obtain, or performing a Federal, state or local government contract or subcontract; violation of Federal or state antitrust statutes relating to the submission of offers; or commission of embezzlement, theft, forgery, bribery, falsification or destruction of records, making false statements, tax evasion, violating Federal criminal tax laws, or receiving stolen property; and (3) ( ) are, ( ) are not presently indicted for, or otherwise criminally or civilly charged by a Government entity with, commission of any of these offenses enumerated in paragraph (h)(2) of this clause; and (4) ( ) Have, ( ) have not, within a three-year period preceding this offer, been notified of any delinquent Federal taxes in an amount that exceeds $3,000 for which the liability remains unsatisfied. (i) Taxes are considered delinquent if both of the following criteria apply: (A) The tax liability is finally determined. The liability is finally determined if it has been assessed. A liability is not finally determined if there is a pending administrative or judicial challenge. In the case of a judicial challenge to the liability, the liability is not finally determined until all judicial appeal rights have been exhausted. (B) The taxpayer is delinquent in making payment. A taxpayer is delinquent if the taxpayer has failed to pay the tax liability when full payment was due and required. A taxpayer is not delinquent in cases where enforced collection action is precluded. (ii) Examples. (A) The taxpayer has received a statutory notice of deficiency, under I.R.C. Sec. 6212, which entitles the taxpayer to seek Tax Court review of a proposed tax deficiency. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek Tax Court review, this will not be a final tax liability until the taxpayer has exercised all judicial appeal rights. (B) The IRS has filed a notice of Federal tax lien with respect to an assessed tax liability, and the taxpayer has been issued a notice under I.R.C. Sec. 6320 entitling the taxpayer to request a hearing with the IRS Office of Appeals contesting the lien filing, and to further appeal to the Tax Court if the IRS determines to sustain the lien filing. In the course of the hearing, the taxpayer is entitled to contest the underlying tax liability because the taxpayer has had no prior opportunity to contest the liability. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek tax court review, this will not be a final tax liability until the taxpayer has exercised all judicial appeal rights. (C) The taxpayer has entered into an installment agreement pursuant to I.R.C. Sec. 6159. The taxpayer is making timely payments and is in full compliance with the agreement terms. The taxpayer is not delinquent because the taxpayer is not currently required to make full payment. (D) The taxpayer has filed for bankruptcy protection. The taxpayer is not delinquent because enforced collection action is stayed under 11 U.S.C. 362 (the Bankruptcy Code). (i) Certification Regarding Knowledge of Child Labor for Listed End Products (Executive Order 13126). [The Contracting Officer must list in paragraph (i)(1) any end products being acquired under this solicitation that are included in the List of Products Requiring Contractor Certification as to Forced or Indentured Child Labor, unless excluded at 22.1503(b).] (1) Listed end products. Listed End Product Listed Countriesof Origin (2) Certification. [If the Contracting Officer has identified end products and countries of origin in paragraph (i)(1) of this provision, then the offeror must certify to either (i)(2)(i) or (i)(2)(ii) by checking the appropriate block.] [ ] (i) The offeror will not supply any end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product. [ ] (ii) The offeror may supply an end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product. The offeror certifies that it has made a good faith effort to determine whether forced or indentured child labor was used to mine, produce, or manufacture any such end product furnished under this contract. On the basis of those efforts, the offeror certifies that it is not aware of any such use of child labor. (j) Place of manufacture. (Does not apply unless the solicitation is predominantly for the acquisition of manufactured end products.) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly- (1) ( ) In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or (2) ( ) Outside the United States. (j) Place of manufacture. (Does not apply unless the solicitation is predominantly for the acquisition of manufactured end products.) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly-- (1) ( ) In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or (2) ( ) Outside the United States. (k) Certificates regarding exemptions from the application of the Service Contract Act. (Certification by the offeror as to its compliance with respect to the contract also constitutes its certification as to compliance by its subcontractor if it subcontracts out the exempt services.) [The contracting officer is to check a box to indicate if paragraph (k)(1) or (k)(2) applies.] [ ] (1) Maintenance, calibration, or repair of certain equipment as described in FAR 22.1003-4(c)(1). The offeror ( ) does ( ) does not certify that- (i) The items of equipment to be serviced under this contract are used regularly for other than Governmental purposes and are sold or traded by the offeror (or subcontractor in the case of an exempt subcontract) in substantial quantities to the general public in the course of normal business operations; (ii) The services will be furnished at prices which are, or are based on, established catalog or market prices (see FAR 22.1003-4(c)(2)(ii)) for the maintenance, calibration, or repair of such equipment; and (iii) The compensation (wage and fringe benefits) plan for all service employees performing work under the contract will be the same as that used for these employees and equivalent employees servicing the same equipment of commercial customers. [ ] (2) Certain services as described in FAR 22.1003-4(d)(1). The offeror ( ) does ( ) does not certify that- (i) The services under the contract are offered and sold regularly to non-Governmental customers, and are provided by the offeror (or subcontractor in the case of an exempt subcontract) to the general public in substantial quantities in the course of normal business operations; (ii) The contract services will be furnished at prices that are, or are based on, established catalog or market prices (see FAR 22.1003-4(d)(2)(iii)); (iii) Each service employee who will perform the services under the contract will spend only a small portion of his or her time (a monthly average of less than 20 percent of the available hours on an annualized basis, or less than 20 percent of available hours during the contract period if the contract period is less than a month) servicing the Government contract; and (iv) The compensation (wage and fringe benefits) plan for all service employees performing work under the contract is the same as that used for these employees and equivalent employees servicing commercial customers. (3) If paragraph (k)(1) or (k)(2) of this clause applies- (i) If the offeror does not certify to the conditions in paragraph (k)(1) or (k)(2) and the Contracting Officer did not attach a Service Contract Act wage determination to the solicitation, the offeror shall notify the Contracting Officer as soon as possible; and (ii) The Contracting Officer may not make an award to the offeror if the offeror fails to execute the certification in paragraph (k)(1) or (k)(2) of this clause or to contact the Contracting Officer as required in paragraph (k)(3)(i) of this clause. (l) Taxpayer Identification Number (TIN) (26 U.S.C. 6109, 31 U.S.C. 7701). (Not applicable if the offeror is required to provide this information to a central contractor registration database to be eligible for award.) (1) All offerors must submit the information required in paragraphs (l)(3) through (l)(5) of this provision to comply with debt collection requirements of 31 U.S.C. 7701(c) and 3325(d), reporting requirements of 26 U.S.C. 6041, 6041A, and 6050M, and implementing regulations issued by the Internal Revenue Service (IRS). (2) The TIN may be used by the Government to collect and report on any delinquent amounts arising out of the offeror's relationship with the Government (31 U.S.C. 7701(c)(3)). If the resulting contract is subject to the payment reporting requirements described in FAR 4.904, the TIN provided hereunder may be matched with IRS records to verify the accuracy of the offeror's TIN. (3) Taxpayer Identification Number (TIN). ( ) TIN: --------------------. ( ) TIN has been applied for. ( ) TIN is not required because: ( ) Offeror is a nonresident alien, foreign corporation, or foreign partnership that does not have income effectively connected with the conduct of a trade or business in the United States and does not have an office or place of business or a fiscal paying agent in the United States; ( ) Offeror is an agency or instrumentality of a foreign government; ( ) Offeror is an agency or instrumentality of the Federal Government. (4) Type of organization. ( ) Sole proprietorship; ( ) Partnership; ( ) Corporate entity (not tax-exempt); ( ) Corporate entity (tax-exempt); ( ) Government entity (Federal, State, or local); ( ) Foreign government; ( ) International organization per 26 CFR 1.6049-4; ( ) Other ----------. (5) Common parent. ( ) Offeror is not owned or controlled by a common parent; ( ) Name and TIN of common parent: Name --------------------. TIN --------------------. (m) Restricted business operations in Sudan. By submission of its offer, the offeror certifies that the offeror does not conduct any restricted business operations in Sudan. (n) Prohibition on Contracting with Inverted Domestic Corporations- (1) Relation to Internal Revenue Code. An inverted domestic corporation as herein defined does not meet the definition of an inverted domestic corporation as defined by the Internal Revenue Code 25 U.S.C. 7874. (2) Representation. By submission of its offer, the offeror represents that-- (i) It is not an inverted domestic corporation; and (ii) It is not a subsidiary of an inverted domestic corporation. (o) Sanctioned activities relating to Iran. (1) The offeror shall email questions concerning sensitive technology to the Department of State at CISADA106@state.gov. (2) Representation and Certification. Unless a waiver is granted or an exception applies as provided in paragraph (o)(3) of this provision, by submission of its offer, the offeror-- (i) Represents, to the best of its knowledge and belief, that the offeror does not export any sensitive technology to the government of Iran or any entities or individuals owned or controlled by, or acting on behalf or at the direction of, the government of Iran; and (ii) Certifies that the offeror, or any person owned or controlled by the offeror, does not engage in any activities for which sanctions may be imposed under section 5 of the Iran Sanctions Act. (3) The representation and certification requirements of paragraph (o)(2) of this provision do not apply if-- (i) This solicitation includes a trade agreements certification (e.g., 52.212-3(g) or a comparable agency provision); and (ii) The offeror has certified that all the offered products to be supplied are designated country end products. (End of provision) 52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--COMMERCIAL ITEMS (AUG 2012) (a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (1) 52.222-50, Combating Trafficking in Persons (FEB 2009) (22 U.S.C. 7104(g)). ___ Alternate I (Aug 2007) of 52.222-50 (22 U.S.C. 7104(g)). (2) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553). (3) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Pub. L. 108-77, 108-78). (b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.) ___ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C. 253g and 10 U.S.C. 2402). __XX__ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Apr 2010) (Pub. L. 110-252, Title VI, Chapter 1 (41 U.S.C. 251 note)). ____ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (June 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.) ___ (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Aug 2012) (Pub. L. 109-282) (31 U.S.C. 6101 note). ___ (5) 52.204-11, American Recovery and Reinvestment Act-Reporting Requirements (Jul 2010) (Pub. L. 111-5). ___ (6) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Dec 2010) (31 U.S.C. 6101 note). ____ (7) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Feb 2012) (41 U.S.C. 2313). ____ (8) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (MAY 2012) (section 738 of Division C of Pub. L. 112-74, section 740 of Division C of Pub. L. 111-117, section 743 of Division D of Pub. L. 111-8, and section 745 of Division D of Pub. L. 110-161). ____ (9) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (NOV 2011) (15 U.S.C. 657a). ____ (10) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Jan 2011) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a). ____ (11) [Reserved] ____ (12)(i) 52.219-6, Notice of Total Small Business Set-Aside (NOV 2011) (15 U.S.C. 644). ____ (ii) Alternate I (NOV 2011). ____ (iii) Alternate II (NOV 2011). ____ (13)(i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644). ____ (ii) Alternate I (Oct 1995) of 52.219-7. ____ (iii) Alternate II (Mar 2004) of 52.219-7. ____ (14) 52.219-8, Utilization of Small Business Concerns (Jan 2011) (15 U.S.C. 637(d)(2) and (3)). ____ (15)(i) 52.219-9, Small Business Subcontracting Plan (Jan 2011) (15 U.S.C. 637(d)(4)). ____ (ii) Alternate I (Oct 2001) of 52.219-9. ____ (iii) Alternate II (Oct 2001) of 52.219-9. ____ (iv) Alternate III (Jul 2010) of 52.219-9. ____ (16) 52.219-13, Notice of Set-Aside of Orders (NOV 2011) (15 U.S.C. 644(r)). ____ (17) 52.219-14, Limitations on Subcontracting (NOV 2011) (15 U.S.C. 637(a)(14)). ____ (18) 52.219-16, Liquidated Damages-Subcon-tracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)). ____ (19)(i) 52.219-23, Notice of Price Evaluation Adjustment for Small Disadvantaged Business Concerns (Oct 2008) (10 U.S.C. 2323) (if the offeror elects to waive the adjustment, it shall so indicate in its offer). ____ (ii) Alternate I (June 2003) of 52.219-23. ____ (20) 52.219-25, Small Disadvantaged Business Participation Program-Disadvantaged Status and Reporting (Dec 2010) (Pub. L. 103-355, section 7102, and 10 U.S.C. 2323). ____ (21) 52.219-26, Small Disadvantaged Business Participation Program- Incentive Subcontracting (Oct 2000) (Pub. L. 103-355, section 7102, and 10 U.S.C. 2323). ____ (22) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (NOV 2011) (15 U.S.C. 657f). ____ (23) 52.219-28, Post Award Small Business Program Rerepresentation (Apr 2012) (15 U.S.C. 632(a)(2)). ____ (24) 52.219-29, Notice of Set-Aside for Economically Disadvantaged Women-Owned Small Business (EDWOSB) Concerns (APR 2012) (15 U.S.C. 637(m)). ____ (25) 52.219-30, Notice of Set-Aside for Women-Owned Small Business (WOSB) Concerns Eligible Under the WOSB Program (APR 2012) (15 U.S.C. 637(m)). __XX__ (26) 52.222-3, Convict Labor (June 2003) (E.O. 11755). _XX___ (27) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (MAR 2012) (E.O. 3126). _ XX ___ (28) 52.222-21, Prohibition of Segregated Facilities (Feb 1999). _ XX ___ (29) 52.222-26, Equal Opportunity (Mar 2007) (E.O. 11246). __ XX __ (30) 52.222-35, Equal Opportunity for Veterans (Sep 2010)(38 U.S.C. 4212). _ XX ___ (31) 52.222-36, Affirmative Action for Workers with Disabilities (Oct 2010) (29 U.S.C. 793). ____ (32) 52.222-37, Employment Reports on Veterans (Sep 2010) (38 U.S.C. 4212). ____ (33) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). ____ (34) 52.222-54, Employment Eligibility Verification (Jul 2012). (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.) ____ (35)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.) ____ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.) ____ (36) 52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (42 U.S.C. 8259b). ____ (37)(i) 52.223-16, IEEE 1680 Standard for the Environmental Assessment of Personal Computer Products (Dec 2007) (E.O. 13423). ____ (ii) Alternate I (Dec 2007) of 52.223-16. ____ (38) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011) (E.O. 13513). ____ (39) 52.225-1, Buy American Act-Supplies (Feb 2009) (41 U.S.C. 10a-10d). ____(40)(i) 52.225-3, Buy American Act--Free Trade Agreements--Israeli Trade Act (MAY 2012) (41 U.S.C. chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, and 112-42). ____ (ii) Alternate I (Mar 2012) of 52.225-3. ____ (iii) Alternate II (Mar 2012) of 52.225-3. ____ (iv) Alternate III (Mar 2012) of 52.225-3. ____ (41) 52.225-5, Trade Agreements (MAY 2012) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note). ____ (42) 52.225-13, Restrictions on Certain Foreign Purchases (June 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury). ____ (43) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150 ____ (44) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150). ____ (45) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C. 255(f), 10 U.S.C. 2307(f)). ____ (46) 52.232-30, Installment Payments for Commercial Items (Oct 1995) (41 U.S.C. 255(f), 10 U.S.C. 2307(f)). ____ (47) 52.232-33, Payment by Electronic Funds Transfer-Central Contractor Registration (Oct 2003) (31 U.S.C. 3332). ____ (48) 52.232-34, Payment by Electronic Funds Transfer-Other than Central Contractor Registration (May 1999) (31 U.S.C. 3332). ____ (49) 52.232-36, Payment by Third Party (Feb 2010) (31 U.S.C. 3332). ____ (50) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a). ____ (51)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631). ____ (ii) Alternate I (Apr 2003) of 52.247-64. (c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.) _____ (1) 52.222-41, Service Contract Act of 1965 (Nov 2007) (41 U.S.C. 351, et seq.). _____ (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 1989) (29 U.S.C. 206 and 41 U.S.C. 351, et seq.). _____ (3) 52.222-43, Fair Labor Standards Act and Service Contract Act-Price Adjustment (Multiple Year and Option Contracts) (Sep 2009) (29 U.S.C. 206 and 41 U.S.C. 351, et seq.). _____ (4) 52.222-44, Fair Labor Standards Act and Service Contract Act-Price Adjustment (Sep 2009) (29 U.S.C. 206 and 41 U.S.C. 351, et seq.). _____ (5) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (Nov 2007) (41 351, et seq.). _____ (6) 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain Services-Requirements (Feb 2009) (41 U.S.C. 351, et seq.). _____ (7) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Mar 2009) (Pub. L. 110-247). _____ (8) 52.237-11, Accepting and Dispensing of $1 Coin (Sept 2008) (31 U.S.C. 5112(p)(1)). (d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records--Negotiation. (1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract. (2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved. (3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law. (e) (1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1)in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause- (i) 52.203-13, Contractor Code of Business Ethics and Conduct (APR 2010) (Pub. L. 110-252, Title VI, Chapter 1 (41 U.S.C. 251 note). (ii) 52.219-8, Utilization of Small Business Concerns (DEC 2010) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $650,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities. (iii) Reserved. (iv) 52.222-26, Equal Opportunity (MAR 2007) (E.O. 11246). (v) 52.222-35, Equal Opportunity for Veterans (SEP 2010) (38 U.S.C. 4212). (vi) 52.222-36, Affirmative Action for Workers with Disabilities (OCT 1998) (29 U.S.C. 793). (vii) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (DEC 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40. (viii) 52.222-41, Service Contract Act of 1965 (Nov 2007) (41 U.S.C. 351, et seq.). (ix) 52.222-50, Combating Trafficking in Persons (FEB 2009) (22 U.S.C. 7104(g)). Alternate I (AUG 2007) of 52.222-50 (22 U.S.C. 7104(g)). (x) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (Nov 2007) (41 U.S.C. 351, et seq.). (xi) 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain Services--Requirements (FEB 2009) (41 U.S.C. 351, et seq.). (xii) 52.222-54, Employment Eligibility Verification (JUL 2012). (xiii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (MAR 2009) (Pub. L. 110-247). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6. (xiv) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (FEB 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64. (2) While not required, the contractor May include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations. (End of clause) 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): http://farsite.hill.af.mil/ (End of clause) 52.252-6 AUTHORIZED DEVIATIONS IN CLAUSES (APR 1984) (a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause. (b) The use in this solicitation or contract of any DoD FAR Supplement (48 CFR Chapter 2) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation. (End of clause) 252.212-7001 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS APPLICABLE TO DEFENSE ACQUISITIONS OF COMMERCIAL ITEMS (JUN 2012) (a) The Contractor agrees to comply with the following Federal Acquisition Regulation (FAR) clause which, if checked, is included in this contract by reference to implement a provision of law applicable to acquisitions of commercial items or components. _XX___ 52.203-3, Gratuities (APR 1984) (10 U.S.C. 2207). (b) The Contractor agrees to comply with any clause that is checked on the following list of Defense FAR Supplement clauses which, if checked, is included in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items or components. (1) ____ 252.203-7000, Requirements Relating to Compensation of Former DoD Officials (SEP 2011) (Section 847 of Pub. L. 110-181). (2) ____ 252.203-7003, Agency Office of the Inspector General (APR 2012)(section 6101 of Pub. L. 110-252, 41 U.S.C. 3509). (3) ____ 252.205-7000, Provision of Information to Cooperative Agreement Holders (DEC 1991) (10 U.S.C. 2416). (4) ____ 252.219-7003, Small Business Subcontracting Plan (DoD Contracts) (JUN 2012) (15 U.S.C. 637). (5) ____ 252.219-7004, Small Business Subcontracting Plan (Test Program) (JAN 2011) (15 U.S.C. 637 note). (6)(i) ____ 252.225-7001, Buy American and Balance of Payments Program (JUN 2012) (41 U.S.C. chapter 83, E.O. 10582). (ii) ____ Alternate I (OCT 2011) of 252.225-7001. (7) ____ 252.225-7008, Restriction on Acquisition of Specialty Metals (JUL 2009) (10 U.S.C. 2533b). (8) ____ 252.225-7009, Restriction on Acquisition of Certain Articles Containing Specialty Metals (JUN 2012) (10 U.S.C. 2533b). (9) ____ 252.225-7012, Preference for Certain Domestic Commodities (JUN 2012) (10 U.S.C. 2533a). (10) ____ 252.225-7015, Restriction on Acquisition of Hand or Measuring Tools (JUN 2005) (10 U.S.C. 2533a). (11) ____ 252.225-7016, Restriction on Acquisition of Ball and Roller Bearings (JUN 2011) (Section 8065 of Pub. L. 107-117 and the same restriction in subsequent DoD appropriations acts). 12) ____ 252.225-7017, Photovoltaic Devices (JUN 2012) (Section 846 of Pub. L. 111-383). 13)(i) ____ 252.225-7021, Trade Agreements (JUN 2012) (19 U.S.C. 2501-2518 and 19 U.S.C. 3301 note). (ii) ____ Alternate I (OCT 2011) of 252.225-7021. (iii) ____ Alternate II (OCT 2011) of 252.225-7021. (14) ____ 252.225-7027, Restriction on Contingent Fees for Foreign Military Sales (APR 2003) (22 U.S.C. 2779). (15) ____ 252.225-7028, Exclusionary Policies and Practices of Foreign Governments (APR 2003) (22 U.S.C. 2755). (16)(i) ____ 252.225-7036, Buy American Act-Free Trade Agreements-Balance of Payments Program (JUN 2012) (41 U.S.C. chapter 83 and 19 U.S.C. 3301 note). (ii) ____ Alternate I (JUN 2012) of 252.225-7036. (iii) ____ Alternate II (JUN 2012) of 252.225-7036. (iv) ____ Alternate III (JUN 2012) of 252.225-7036. (v) ____ Alternate IV (JUN 2012) of 252.225-7036. (vi) ____Alternate V (JUN 2012) of 252.225-7036. (17) ____ 252.225-7038, Restriction on Acquisition of Air Circuit Breakers (JUN 2005) (10 U.S.C. 2534(a)(3)). (18) ____ 252.225-7039, Contractors Performing Private Security Functions (JUN 2012) (Section 862 of Pub. L. 110-181, as amended by section 853 of Pub. L. 110-417 and sections 831 and 832 of Pub. L. 111-383). (19) ____ 252.226-7001, Utilization of Indian Organizations, Indian-Owned Economic Enterprises, and Native Hawaiian Small Business Concerns (SEP 2004) (Section 8021 of Pub. L. 107-248 and similar sections in subsequent DoD appropriations acts). (20) ____ 252.227-7013, Rights in Technical Data--Noncommercial Items (FEB 2012), if applicable (see 227.7103-6(a)). (21) ____ 252.227-7015, Technical Data-Commercial Items (DEC 2011) (10 U.S.C. 2320). (22) ____ 252.227-7037, Validation of Restrictive Markings on Technical Data (JUN 2012), if applicable (see 227.7102-4(c)))(10 U.S.C. 2321). (23) ____ 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports (MAR 2008) (10 U.S.C. 2227). (24) ____ 252.237-7010, Prohibition on Interrogation of Detainees by Contractor Personnel (NOV 2010) (Section 1038 of Pub. L. 111-84) (25) ____ 252.237-7019, Training for Contractor Personnel Interacting with Detainees (SEP 2006) (Section 1092 of Pub. L. 108-375). (26) __XX__ 252.243-7002, Requests for Equitable Adjustment (MAR 1998) (10 U.S.C. 2410). (27) ____ 252.246-7004, Safety of Facilities, Infrastructure, and Equipment For Military Operations (OCT 2010) (Section 807 of Pub. L. 111-84). (28) ____ 252.247-7003, Pass-Through of Motor Carrier Fuel Surcharge Adjustment to the Cost Bearer (SEP 2010) (Section 884 of Pub. L. 110-417). (29)(i) _ ___ 252.247-7023, Transportation of Supplies by Sea (MAY 2002) (10 U.S.C. 2631). (ii) ____ Alternate I (MAR 2000) of 252.247-7023. (iii) ____ Alternate II (MAR 2000) of 252.247-7023. (iv) ____ Alternate III (MAY 2002) of 252.247-7023. (30) ____ 252.247-7024, Notification of Transportation of Supplies by Sea (MAR (2000) (10 U.S.C. 2631). (31) ____ 252.247-7027, Riding Gang Member Requirements (OCT 2011) (Section 3504 of Pub. L. 110-417). c) In addition to the clauses listed in paragraph (e) of the Contract Terms and Conditions Required to Implement Statutes or Executive Orders--Commercial Items clause of this contract (FAR 52.212-5), the Contractor shall include the terms of the following clauses, if applicable, in subcontracts for commercial items or commercial components, awarded at any tier under this contract: (1) 252.225-7039, Contractors Performing Private Security Functions (JUN 2012) (Section 862 of Pub. L. 110-181, as amended by section 853 of Pub. L. 110-417 and sections 831 and 832 of Pub. L. 111-383). 2) 252.227-7013, Rights in Technical Data--Noncommercial Items (FEB 2012), if applicable (see 227.7103-6(a)). (3) 252.227-7015, Technical Data--Commercial Items (DEC 2011), if applicable (see 227.7102-4(a)). (4) 252.227-7037, Validation of Restrictive Markings on Technical Data (JUN 2012), if applicable (see 227.7102-4(c)). (5) 252.237-7010, Prohibition on Interrogation of Detainees by Contractor Personnel (NOV 2010) (Section 1038 of Pub. L. 111-84). (6) 252.237-7019, Training for Contractor Personnel Interacting with Detainees (SEP 2006) (Section 1092 of Pub. L. 108-375). (7) 252.247-7003, Pass-Through of Motor Carrier Fuel Surcharge Adjustment to the Cost Bearer (SEP 2010) (Section 884 of Pub. L. 110-417). (8) 252.247-7023, Transportation of Supplies by Sea (MAY 2002) (10 U.S.C. 2631). (9) 252.247-7024, Notification of Transportation of Supplies by Sea (MAR 2000) (10 U.S.C. 2631). (End of clause) WAWF EXPEDITE ELECTRONIC PAYMENT (a) This contract action for commercial items of supply incorporates DFARS 252.232-7003, Electronic Submission of Payment Requests. For the Department of Defense, the MANDATORY method of electronic submission of payment requests is by Wide Area Workflow (WAWF.) This means that paper invoices are not permitted and will not be processed for payment. (b) Definitions Important to the WAWF Process Acceptor: The organization or person designated in block 15 of the SF 1449 (cover page of the purchase request) who accepts the products or services tendered. The acceptor has a unique DoDAAC (Department of Defense Activity Address Code) shown in the upper right had box of block 15 that must be used to notify the acceptor that an electronic invoice is pending. DoDAAC: As stated above, an acronym for Department of Defense Activity Address Code. This code unique to each organization in the Department of Defense. Knowledge of what DoDAAC codes must be input into WAWF electronic invoices is crucial to the payment process as it alerts the acceptor that an invoice is pending for acceptance and alerts the payment office that a completed action is ready to process for payment. Payment Office: The location of the Defense Finance and Accounting Service (DFAS) office shown in block 18a of the SF 1449 that will process your electronic invoices. The payment office also has a unique DoDAAC. (c) Options within WAWF include a "combo" for supply items, a 2-in-1 invoice for service contracts and a "stand-alone" invoice. It is recommended that the use of, stand-alone invoices be avoided. The matching of "stand-alone" invoices by DFAS offices requires invoices and receiving reports be separately or individually submitted by the vendor and the receiving activity and can routinely cause lengthy delays and possible rejection because they do not appear together and therefore must be individually matched and then verified. The use of the "combo" or "2-in-1" does not present this problem and avoids the attendant delays associated with matching. Detailed instructions on how to create an invoice, as well as other topical issues, can be found at the WAWF training website at http://www.wawftraining.com. (d) A key, important, and imperative step for vendors to take is to e-mail notification to the acceptor identified in the contract in block 15 by clicking on the "Send More E-Mail Notifications" link in WAWF upon submission of the electronic invoice instrument (combo or 2-in1). This step provides notice to the acceptor of your pending invoice Self registration for the use of WAWF can be accomplished at https://wawf.eb.mil/index.html. For assistance in registering contact: 1-866-618-5988 COMMERCIAL: 801-605-7095 CSCASSIG@CSD.DISA.MIL Helpful training on the use of WAWF for the submission of invoices is available on line at http://www.wawftraining.com. (e) Questions concerning payments: (1) DFAS Indianapolis at 1-888-332-7366. You will need to have the delivery/purchase/contract number ready when calling about payments. (2) Payment and receipt information can be accessed at the DFAS website https://myinvoice.csd.disa.mil/. You will need to have the delivery/purchase/contract number or invoice number to inquire about the payment. (3) DMA POCs: ACCEPTOR/WAWF/INVOICES: Scott Fidler -- (703) 693-9527 - scott.fidler@usmc.mil CONTRACT SPECIALIST: Claudio Casupang - (951)413-2381 - claudio.casupang@dma.mil CONTRACTING OFFICER: Susan Madrid - (951)413-2371 - susan.madrid@dma.mil APPROVED FOR POSTING ON FBO ____________________________ SUSAN MADRID CONTRACTING OFFICER
Web Link: FBO.gov Permalink
(https://www.fbo.gov/notices/fd1135b9b44a2e16d316bc23ded64ff9)
Place of Performance: Address: M54004 SUPPLY OFFICER, SCOTT FIDLER, MYER/HENDERSON HALL, 1555 SOUTHGATE RD BLDG 28, ARLINGTON, Virginia, 22214-5000, United States; Zip Code: 22214-5000
Record: SN02978497-W 20130206/130204233731-fd1135b9b44a2e16d316bc23ded64ff9 (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

58 -- AUDIO VISUAL PRESENTATION EQUIP - JA FOR NO SET ASIDE