SOLICITATION NOTICE
C -- INDEFINITE DELIVERY TYPE (IDT) CONTRACT FOR MISCELLANEOUS DESIGN SERVICES PRIMARILY WITHIN THE 3 DISTRICTS (MEMPHIS, VICKSBURG AND NEW ORLEANS) THAT COMPRISE THE LOWER PORTION OF THE MISSISSIPPI VALLEY DIVISION OF THE U.S. ARMY CORPS OF ENGINEERS; BUT MAY
- Notice Date
- 11/1/2012
- Notice Type
- Presolicitation
- NAICS
- 541330
— Engineering Services
- Contracting Office
- Department of the Army, U.S. Army Corps of Engineers, USACE District, Vicksburg, Attn: CEMVK-CT, 4155 Clay Street, Vicksburg, Mississippi, 39183-3435, United States
- ZIP Code
- 39183-3435
- Solicitation Number
- W912EE-13-O-0002
- Archive Date
- 12/19/2012
- Point of Contact
- Jason M. Carlock, Phone: 6016315793
- E-Mail Address
-
jason.m.carlock@usace.army.mil
(jason.m.carlock@usace.army.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- 1. CONTRACT INFORMATION: SF 330s are due by Close of Business on 04 December 2012. This announcement is set aside for small businesses. The services to be procured under this announcement are classified in North American Industry Classification System Code 541330. This contract is being procured in accordance with the Brooks A-E Act as implemented in FAR Subpart 36.6. Multiple contracts will be awarded as a result of this announcement. Contracts may be awarded by Memphis and/or Vicksburg Districts. Work will be accomplished under separate Indefinite Delivery Type Contracts NTE $3,000,000 with a performance period of three (3) years for each contract. Work will be issued by negotiated firm-fixed price task orders. Allocation of task orders will be based on the following factors: specialized knowledge or expertise which would enhance execution, past experience or knowledge of the locality, availability of appropriate staff, performance on previous task orders, magnitude of task order relative to remaining contract capacity, equitable workload distribution. 2. PROJECT INFORMATION: A-E service capabilities are required for various civil works projects and support for other agencies. Work may be comprised of civil, structural, hydraulic, hydrologic, geotechnical, environmental, sanitary, electrical, mechanical, surveying, mapping, CAD and architectural design. Work may include, but is not limited to engineering support for feasibility studies, preparation of design reports, value engineering, preparation of conceptual and contract drawings, computer aided drafting, cost estimating, preparation of contract specifications, performing design analyses and preparing design-build request for proposals. Work shall be accomplished in English and/or metric units as directed. Professional design experience in civil, structural, geotechnical, hydraulic, hydrologic, sanitary, mechanical and electrical engineering and surveying and mapping, CAD, architecture, and cost estimating is required. Capability and experience is required for design of flood damage reduction projects including channels, levees, weirs, grade control structures, drainage structures (pipes and culverts), gated structures, floodwalls and pump stations; and other projects including channel stabilization, site development, multipurpose buildings and recreational facilities. Firms must employ qualified registered professional personnel in the following key disciplines: civil, structural, geotechnical, hydraulic, sanitary, mechanical and electrical engineering, surveying, soil sampling and laboratory testing and architecture and demonstrate experience in presenting project details and/or study results using Bentley's MicroStation software to develop drawings to present project details and/or study results. Three-dimensional models may be required. Development of Building Information Models (BIM) may also be required. 3. SELECTION CRITERIA: Selection criteria will be based on the following considerations and are listed in descending order of importance (first by major criterion and then by each sub-criterion). Criteria A through F are primary. Criteria G is secondary and will only be used as a "tie-breaker," if necessary, in ranking the most highly qualified firms. A. Specialized Experience and Technical Competence: List no more than 10 projects that best illustrate current qualifications, relevant project experience and technical competence of the firm and consultants in the work described in paragraph 2 above. B. Professional qualifications: The firm must indicate professional registration and work experience of key personnel with regard to the 10 key projects. The firm should emphasize professional registration, advanced degrees, and specific work experience of key personnel. The selected firm should also indicate adequate management personnel with required qualifications and experience to assure prompt response to assignments. C. Capacity: Consideration will be given to firms that indicate the capacity to perform multiple projects simultaneously and to complete work in a timely manner. D. Knowledge of locality: Consideration will be given to firms that indicate experience and knowledge of the geographic area encompassed in the Memphis, Vicksburg and New Orleans Districts and its terrain features, area working conditions, location of major land forms, and river basins, etc. E. Past Performance: Consideration will be given to ratings and verifiable past performance on previous DoD contracts. Consideration will also be given to firms that have above-average performance on the type of work described in paragraph 2 above. F. Geographic proximity to Memphis, Tennessee, Vicksburg, Mississippi and New Orleans, Louisiana. G. DoD contract awards in the past 12 months. The greater the awards the lesser the consideration. In the final selection process, the most highly qualified firms will be interviewed. The contract will be awarded on or about May 2013. 5. SUBMISSION REQUIREMENTS: Interested firms having the capabilities for this work must submit one paper copy and one electronic copy (in PDF format submitted on a CD) of SF 330 along with a copy of part II of each sub-consultant's SF 330 to U.S. Army Corps of Engineers District, Vicksburg ATTN: A-E Technical Services Section (CEMVK-EC-TE), 4155 Clay Street, Vicksburg, Mississippi 39183, no later than close of business (COB) 4:00 PM Central on 04 December 2012. Include both the solicitation number and the company's DUNS number on all submittals. Note the following restrictions on submittal - Resumes of key persons, specialists and individual consultants (Section E) anticipated for this contract will be limited to a maximum of 20 typed pages. Pages in excess of the maximum of 20 will be discarded and not used in the evaluations. Additional information (Section H) will be limited to a maximum of 20 pages. All telephone calls should be directed to Ms. Michelle Moore, (601) 631-5139 or email Michelle.Moore@usace.army.mil. *** APPOINTMENTS WILL NOT BE SCHEDULED FOR THE PURPOSE OF DISCUSSING THIS ANNOUNCEMENT *** This is not a Request for Proposal. A fee proposal will be requested at a later date. **** NOTE: Contractors must be registered with the appropriate SBA Office.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/COE/DACA38/W912EE-13-O-0002/listing.html)
- Place of Performance
- Address: PRIMARILY WITHIN THE 3 DISTRICTS (MEMPHIS, VICKSBURG AND NEW ORLEANS) THAT COMPRISE THE LOWER PORTION OF THE MISSISSIPPI VALLEY DIVISION OF THE U.S. ARMY CORPS OF ENGINEERS; BUT MAY ALSO BE USED ANYWHERE WITHIN THE GEOGRPAHICAL BOUNDARIES OR OTHER MISSIONS OF THE 6 DISTRICTS INCLUDED IN THE MISSISSIPPI VALLEY DIVISION., United States
- Record
- SN02923092-W 20121103/121101234735-af60a6ab3c7b6430c82bb79eb27f705c (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |