SOLICITATION NOTICE
13 -- CARTRIDGE,AIRCRAFT FIRE EXTINGUI
- Notice Date
- 11/1/2012
- Notice Type
- Presolicitation
- NAICS
- 325920
— Explosives Manufacturing
- Contracting Office
- DEPARTMENT OF THE AIR FORCE; OO ALC GHGK MUNITIONS;6033 ELM LNBLDG 1247; HILL AIR FORCE BASE; UT; 84056
- ZIP Code
- 84056
- Solicitation Number
- FA8213-12-Q-3035
- Response Due
- 11/14/2012
- Archive Date
- 2/12/2013
- Point of Contact
- Roger Bell, Phone 801-777-7358, Fax 801-777-5840, Emailroger.bell@hill.af.mil
- E-Mail Address
-
Roger Bell
(roger.bell@hill.af.mil)
- Small Business Set-Aside
- N/A
- Description
- PR Number(s): FD20201277053 Item: 0001 NSN: 1377001720428ES CARTRIDGE,AIRCRAFT FIRE EXTINGUI P/N: 200790N/C, P/N: 895408-1, P/N: 114PS203-7, Description: CARTRIDGE,AIRCRAFT FIRE EXTINGUI|2.250 INCHES NOMINAL|1.000 INCHES NOMINAL|EXWT|2.00 INCHES SHIPPING CONTAINER|4.00 INCHES SHIPPING CONTAINER|2.00 INCHES SHIPPING CONTAINER|1377-TY60|UN0323|EX1988090737|0.000000 STORAGE POUNDS AND 0.000900 TRANSPORTATION POUNDS|TWO SQUIBS;CLOSED END TYPE;6.18 GRAINS BURNING CHARGE|0.2 SHIPPING CONTAINER POUNDS|1.4|1.4 DEPARTMENT OF DEFENSE HAZARD CLASS DIVISION|1|CARTRIDGES, POWER DEVICE|1.4S Quantity: 26.0000 EA Destn: FMS COUNTRIES. PR Number(s): FD20201277053 Item: 0002 NSN: 1377001720428ES CARTRIDGE,AIRCRAFT FIRE EXTINGUI P/N: 200790N/C, P/N: 895408-1, P/N: 114PS203-7, Description: CARTRIDGE,AIRCRAFT FIRE EXTINGUI|2.250 INCHES NOMINAL|1.000 INCHES NOMINAL|EXWT|2.00 INCHES SHIPPING CONTAINER|4.00 INCHES SHIPPING CONTAINER|2.00 INCHES SHIPPING CONTAINER|1377-TY60|UN0323|EX1988090737|0.000000 STORAGE POUNDS AND 0.000900 TRANSPORTATION POUNDS|TWO SQUIBS;CLOSED END TYPE;6.18 GRAINS BURNING CHARGE|0.2 SHIPPING CONTAINER POUNDS|1.4|1.4 DEPARTMENT OF DEFENSE HAZARD CLASS DIVISION|1|CARTRIDGES, POWER DEVICE|1.4S Quantity: 10.0000 EA Destn: FMS COUNTRIES. PR Number(s): FD20201277053 Item: 0003 DATA IAW DD 1423-1 ATTACHED HERE TO Description: A001 Supp. Description: Each respective CDRL shall be attached electronically in WAWF using DODAAC FA8213 when invoicing for this CLIN. Failure to do so will result in delay of Government acceptance and/or rejection of invoicing. Quantity: 1.0000 LO Destn: FA8213,HILL AIR FORCE BASE,UT,84056-5825. Delivery: *ARO IAW DD FORM 1423-1, 1.00 MM PR Number(s): FD20201277053 Item: 0004 DATA IAW DD 1423-1 ATTACHED HERE TO Description: A002 TEST/INSPECTION REPORT, A003 FAILURE ANALYSIS AND CORRECTIVE REPORT, A004 LOT ACCEPTANCE TEST PLAN Supp. Description: Each respective CDRL shall be attached electronically in WAWF using DODAAC FA8213 when invoicing for this CLIN. Failure to do so will result in delay of Government acceptance and/or rejection of invoicing. Quantity: 1.0000 LO Destn: FA8213,HILL AIR FORCE BASE,UT,84056-5825. Delivery: *ARO IAW DD FORM 1423-1, 1.00 MM PR Number(s): FD20201277053 Item: 0005 Description: FIRST ARTICLE REQUIREMENT Supp. Description: The requirement of this CLIN applies to all subsequent CLINs : 0.0000 Plus 0003 additional items Duration of Contract Period: 29 March 2013 Electronic procedure will be used for this solicitation. One or more of the items under this acquisition is subject to Free Trade Agreements. Interested parties may obtain copies of Military and Federal Specifications and Standards, Qualified Product Lists, Military Handbooks, and other standardization documents from the DoD Single Stock Point (DODSSP), in Philadelphia, PA. Most documents are available in Adobe PDF format from the ASSIST database via the Internet at http://assist.daps.dla.mil/. One or more of the items under this acquisition may be subject to an Agreement on Government Procurement approved and implemented in the United States by the Trade Agreements Act of 1979. All offers shall be in the English language and in U.S. dollars. All interested suppliers may submit an offer. First article test required. Award will be made only if the offeror, the product/service, or the manufacturer meets qualification requirements at the time of award in accordance with FAR clause 52.209-1. The solicitation identifies the office where additional information can be obtained concerning qualification requirements are cited in each individual solicitation. This part required engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from the approved source(s). The approved source(s) retain data rights, manufacturing knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than the current source(s).
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFMC/OOALC/FA8213-12-Q-3035/listing.html)
- Record
- SN02923080-W 20121103/121101234728-3a202cc95e9be3e9445c377cb0c7d497 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |