SOURCES SOUGHT
48 -- SPECIALTY VALVES
- Notice Date
- 10/11/2012
- Notice Type
- Sources Sought
- NAICS
- 332911
— Industrial Valve Manufacturing
- Contracting Office
- Department of Energy, Bechtel National, Inc. (DOE Contractor), Bechtel National Inc., 2435 Stevens Center Place, Richland, Washington, 99352
- ZIP Code
- 99352
- Solicitation Number
- 24590-QL-MRA-PV18-00001
- Point of Contact
- Winifred Renz, Phone: 5093712338
- E-Mail Address
-
werenz@bechtel.com
(werenz@bechtel.com)
- Small Business Set-Aside
- N/A
- Description
- Request for Interest Form (LBL) Valves, AMR Specialty Document Number: 24590-QL-MRA-PV18-00001 Important to Safety? Yes Quality Level: Q Quality Surveillance: Level 2 Commodity Code: PV18 NAICS Code: 332911 Submit Interest By: October 24, 2012 PROJECT DESCRIPTION AND LOCATION The Hanford Tank Waste Treatment and Immobilization Plant (WTP) is a complex of radioactive waste treatment processing facilities designed and constructed by Bechtel for the Department of Energy (DOE). The facility will process the Hanford Site tank waste and put the waste into a stable glass form. The processed waste will be shipped to other sites for depository. The Project site is located at 200 East Area of the Hanford Site near Richland, Washington, along the Columbia River. The site elevation varies from 662 to 684 feet above mean sea level. Sand and silt exist as surface materials. Ambient temperature is (-) 23 degrees F minimum to 113 degrees F maximum, with relative humidity of 5% minimum to 100% maximum. The project design life is 40 years. SCOPE OF WORK Provide Commercial Grade Dedication Engineering and Equipment Environmental and Seismic Qualification for commercial ammonia equipment to be used on the WTP site (NQA-1) SEISMIC TEST UNITS AND CONFIGURATION WILL BE REQUIRED. ASME B31.3 qualification of listed/unlisted components required EQUIPMENT AND MATERIALS REQUIRED Anderson Greenwood 2" safety selector valves, QTY 2 Anderson Greenwood 2" x 3" Pressure Safety Valves, QTY 4 Hex Valve HB502U4131462 root valves for instruments, QTY 4 Drain Valves, QTY 4 CODES ASME B31.3-96, ASME Section III, VIII (UV stamp, N stamp) STANDARDS IEEE 382-96 (seismic testing) QA REQUIREMENTS Potential bidders should provide, in electronic format, some documentation that describes their company's Quality Assurance program. A summary, or table of contents of the program or similar evidence will be satisfactory. This information is to be uploaded directly into the Bechtel Supplier Registration web site: https://supplier.bechtel.com. T he successful bidder must be registered with Bechtel and shall have and maintain a documented quality assurance program that complies with the applicable WTP requirements including, but not limited to, 10 CFR 830, DOE Order 414.1, ASME NQA-1. The bidder's Quality Assurance Program must meet the specific requirements of the Material Requisition. The bidder must have the ability to demonstrate satisfactory implementation of their Quality Assurance Program to be considered for an award. In order to expedite the qualification process, potential bidders are encouraged to provide a copy of their Quality Assurance Program (include the "Package Ref." - Document Number) to the buyer noted below, if a copy was not previously submitted and evaluated. The preferred method is to submit in electronic format via e-mail to: bjkalous@bechtel.com -or- Hard copy (include the "Package Ref." - Document Number) may be submitted to: Bechtel National, Incorporated Attn: Bethany Kalous MS10-E 2435 Stevens Center Place Richland, WA 99354 COMMERCIAL\TECHNICAL REQUIREMENTS Bechtel Procurement is responsible for collection, evaluation, and internal publication of Supplier/Subcontractor information through our project's pre-qualification program. In addition to the information requested above, if not previously registered, Bechtel requires you to register your company at the Supplier and Contractor Portal at: https://supplier.bechtel.com and to upload pre-qualifications with that registration as noted below. Prior to being considered on any Bidders List you must go to the Qualification Process on this web site (www.hanfordvitplant.com) to complete the required forms for this opportunity. All information provided shall be strictly confidential. QUESTIONNAIRE Potential offeror shall submit their interest in this opportunity via e-mail using the " Submit Interest " link provided on the "Business Opportunities" listing (www.hanfordvitplant.com), which provides an outlined email including, but not limited to the bulleted items below, and is appropriately addressed to our central mailbox and to the buyer. Each interest email should include: •§ Dun and Bradstreet #: •§ Company Name: •§ Company Address: •§ Contact Phone #: •§ Contact Fax #: •§ Contact Person: •§ E-mail Address: CONTACT Bechtel National, Inc. 2435 Stevens Center Place Richland, WA 99354 Attn: Bethany Kalous Mailstop: MS10-E Email: bjkalous@bechtel.com
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOE/BNI/BNI/24590-QL-MRA-PV18-00001/listing.html)
- Place of Performance
- Address: Supplier's place of business, United States
- Record
- SN02912201-W 20121013/121011234036-8fd02593f82ffb31a9d210e3fdaa085a (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |