MODIFICATION
62 -- Tactical Flashlight - LED, AA powered, multiple output modes
- Notice Date
- 7/13/2012
- Notice Type
- Modification/Amendment
- Contracting Office
- Mission & Installation Contracting Command (MICC), Fort Stewart, GA 31314
- ZIP Code
- 31314
- Solicitation Number
- PRC2119BCO0001
- Response Due
- 7/11/2012
- Archive Date
- 1/7/2013
- Point of Contact
- Name: Client Services, Title: Sourcing Agent, Phone: 1.877.9FEDBID, Fax: 703.442.7822
- E-Mail Address
-
clientservices@fedbid.com;
- Small Business Set-Aside
- Total Small Business
- Description
- CANCELLATION NOTICE:This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is PRC2119BCO0001 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-58. The associated North American Industrial Classification System (NAICS) code for this procurement is 335129 with a small business size standard of 500.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2012-07-11 14:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Hunter AAF, GA 31409 The MCC Bragg - ICO Stewart requires the following items, Brand Name or Equal, to the following: LI 001, Fenix Tactical Flashlights (LD22) or equivalent LED bulb with a 50,000 hour lifespan must use 2x 1.5V AA batteries (can be Ni-MH or Alkaline) Multiple output modes/Runtime; Turbo - 190 lumens - 2 hours 26 min High - 92 lumens - 5 hours 59 min Mid - 42 lumens - 15 hours Low - 3 lumens - 110 hours Strobe - 190 lumens SOS - 92 lumens Length - 6.14", 156mm Body Diameter -.85", 21.5mm Head Diameter -.85", 21.5mm Weight - 2.1oz, 60gm (excluding batteries) Digitally regulated output for constant brightness Reverse polarity protection for improper battery installation Anti-roll, slip-resistant body design Push-button tail cap switch with momentary-on function Made of durable aircraft-grade aluminum Premium Type III hard-anodized anti-abrasive finish Toughened ultra-clear glass lens with anti-reflective coating, 80, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MCC Bragg - ICO Stewart intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MCC Bragg - ICO Stewart is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. The selected Offeror must comply with the following commercial item terms and conditions. FAR 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, will apply: 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of a FAR clause may be accessed electronically at http://www.acqnet.gov/far. DFAR 252.211-7003, Item Identification and Valuation Reference: http://farsite.af.mil CCR Requirement - Company must be registered on Central Contractor Registration (CCR) before an award could be made to them. If company is not registered in CCR, they may do so by going to CCR web site at http://www.ccr.gov. Sellers must present their representations and certifications, upon request, through the Online Representations and Certifications Application (ORCA) at http:orca.bpn.gov. New equipment ONLY, NO remanufactured or used products. No "GREY" market items. Bid MUST be good for 30 calendar days after submission FOB Destination CONUS (CONtinental U.S.) Shipping charges shall be included in the purchase cost of the products. Sellers shall deliver the products on the own conveyance to the location listed on the purchase order. No partial shipments unless otherwise specified at time of order. In accordance with DFARS 252.232-7003, ?Electronic Submission of Payment Requests and Receiving Reports?, the contractor shall submit their payment request electronically using the Wide Area Workflow (WAWF). The WAWF website is located at https://wawf.eb.mil. There is no charge to use WAWF. Contractors must register to use WAWF at this website and ensure an electronic business point of contact (POC) is designated in the Central Contractor Registration site at http://www.ccr.gov within ten (10) calendar days after award of this contract. Contractor training is available at the website Home Page, under ?about WAWF?. Contractors may contact the WAWF Customer Support for assistance toll free at 866-618-5988; commercial: 801-605-7095; Fax commercial: 801-605-7453 or CSCASSIG@CSD.DISA.MIL As prescribed in 32.705-1(a), insert the following clause: AVAILABILITY OF FUNDS (APR 1984) Funds are not presently available for this contract. The Government?s obligation under this contract is contingent upon the availability of appropriated funds from which payment for contract purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are made available to the Contracting Officer for this contract and until the Contractor receives notice of such availability, to be confirmed in writing by the Contracting Officer. (End of clause) As prescribed in 32.1110(d), insert the following clause: PAYMENT BY THIRD PARTY (FEB 2010) (a) General. (1) Except as provided in paragraph (a)(2) of this clause, the Contractor agrees to accept payments due under this contract, through payment by a third party in lieu of payment directly from the Government, in accordance with the terms of this clause. The third party and, if applicable, the particular Governmentwide commercial purchase card to be used are identified elsewhere in this contract. (2) The Governmentwide commercial purchase card is not authorized as a method of payment during any period the Central Contractor Registration (CCR) indicates that the Contractor has delinquent debt that is subject to collection under the Treasury Offset Program (TOP). Information on TOP is available at http://fms.treas.gov/debt/index.html. If the CCR subsequently indicates that the Contractor no longer has delinquent debt, the Contractor may request the Contracting Officer to authorize payment by Governmentwide commercial purchase card. (b) Contractor payment request. (1) Except as provided in paragraph (b)(2) of this clause, the Contractor shall make payment requests through a charge to the Government account with the third party, at the time and for the amount due in accordance with those clauses of this contract that authorize the Contractor to submit invoices, contract financing requests, other payment requests, or as provided in other clauses providing for payment to the Contractor. (2) When the Contracting Officer has notified the Contractor that the Governmentwide commercial purchase card is no longer an authorized method of payment, the Contractor shall make such payment requests in accordance with instructions provided by the Contracting Officer during the period when the purchase card is not authorized. (c) Payment. The Contractor and the third party shall agree that payments due under this contract shall be made upon submittal of payment requests to the third party in accordance with the terms and conditions of an agreement between the Contractor, the Contractor?s financial agent (if any), and the third party and its agents (if any). No payment shall be due the Contractor until such agreement is made. Payments made or due by the third party under this clause are not payments made by the Government and are not subject to the Prompt Payment Act or any implementation thereof in this contract. (d) Documentation. Documentation of each charge against the Government?s account shall be provided to the Contracting Officer upon request. (e) Assignment of claims. Notwithstanding any other provision of this contract, if any payment is made under this clause, then no payment under this contract shall be assigned under the provisions of the assignment of claims terms of this contract or the Assignment of Claims Act of 1940, as amended, 31 U.S.C. 3727, 41 U.S.C. 15. (f) Other payment terms. The other payment terms of this contract shall govern the content and submission of payment requests. If any clause requires information or documents in or with the payment request, that is not provided in the third party agreement referenced in paragraph (c) of this clause, the Contractor shall obtain instructions from the Contracting Officer before submitting such a payment request. (End of clause) As prescribed in 11.107(a), insert the following provision: BRAND NAME OR EQUAL (AUG 1999) (a) If an item in this solicitation is identified as ?brand name or equal,? the purchase description reflects the characteristics and level of quality that will satisfy the Government?s needs. The salient physical, functional, or performance characteristics that ?equal? products must meet are specified in the solicitation. (b) To be considered for award, offers of ?equal? products, including ?equal? products of the brand name manufacturer, must? (1) Meet the salient physical, functional, or performance characteristic specified in this solicitation; (2) Clearly identify the item by? (i) Brand name, if any; and (ii) Make or model number; (3) Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and (4) Clearly describe any modifications the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modifications. (c) The Contracting Officer will evaluate ?equal? products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer. (d) Unless the offeror clearly indicates in its offer that the product being offered is an ?equal? product, the offeror shall provide the brand name product referenced in the solicitation. (End of provision) To request a questions and answers summary please email clientservices@fedbid.com or submit a request through the "submit a question" feature.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/554926195fa1211d7f276a9728037e94)
- Place of Performance
- Address: Hunter AAF, GA 31409
- Zip Code: 31409
- Zip Code: 31409
- Record
- SN02802791-W 20120715/120713235532-554926195fa1211d7f276a9728037e94 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |