SOLICITATION NOTICE
84 -- Tactical Equipment
- Notice Date
- 4/16/2012
- Notice Type
- Combined Synopsis/Solicitation
- Contracting Office
- 45055 Underwood Lane, Sterling, VA 20116
- ZIP Code
- 20116
- Solicitation Number
- FY12-GM-118
- Response Due
- 4/19/2012
- Archive Date
- 10/16/2012
- Point of Contact
- Name: Gregory Mendoza, Title: ATA Program/ US Department of State, Phone: 5712269752, Fax:
- E-Mail Address
-
mendozaga@state.gov;
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is FY12-GM-118 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-57. The associated North American Industrial Classification System (NAICS) code for this procurement is 316991 with a small business size standard of 500.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2012-04-19 16:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Multiple shipping information. The Department of State requires the following items, Meet or Exceed, to the following: LI 001, Level III (Stand Alone)Steel Plates, 10" x 12", Velocity Systems, Phalanx Model Number VS-PSR-1012, 48, EA; LI 002, Point Blank Level IIIA Tac One Concelable Vest with Front and Back Pockets to hold 10"x12" Level III Steel Plates, Size: Medium, 16, EA; LI 003, Point Blank Level IIIA Tac One Concelable Vest with Front and Back Pockets to hold 10"x12" Level III Steel Plates, Size: Large, 6, EA; LI 004, Point Blank Level IIIA Tac One Concelable Vest with Front and Back Pockets to hold 10"x12" Level III Steel Plates, Size: Extra Large, 2, EA; LI 005, Mask, Gas, Full Face, Size: Small, 3, EA; LI 006, Mask, Gas, Full Face, Size: Medium, 18, EA; LI 007, Mask, Gas, Full Face, Size:Large, 3, EA; LI 008, Training Canisters for Gas Mask, 30, EA; LI 009, Pouch, Gas, Mask, Color- Black, 24, EA; LI 010, Pouch, Diversionary, Double, Color-Black, 24, EA; LI 011, Stream Light JR. Flashlight with Pouch, 24, EA; LI 012, Hell Storm Elbow Pads, 24, PR; LI 013, Hell Storm Knee Pads, 24, PR; LI 014, Blackhawk A.C.E. Goggle, Coyote Tan, 30, PR; LI 015, Handcuff Peerless, Black, 24, PR; LI 016, Handcuff Case, Color-Black, 24, EA; LI 017, CZ Gear Bag, Dimensions-33.5"x16"x15", 24, EA; LI 018, Cuffs, Flex, Double Loop, Training, 10 per pack, 60, PG; LI 019, Blackhawk, Omega, Elite Tactical Vest #1, 24, EA; LI 020, Ballistic Duty Belt, Size: Small, 3, EA; LI 021, Ballistic Duty Belt, Size: Medium, 18, EA; LI 022, Ballistic Duty Belt, Size: Large, 3, EA; LI 023, Mich Helmet IIIA, Wendy Padding System w/Foam inserts 1-5, Size: Small, 3, EA; LI 024, Mich Helmet IIIA, Wendy Padding System w/Foam inserts 1-5, Size: Medium, 18, EA; LI 025, Mich Helmet IIIA, Wendy Padding System w/Foam inserts 1-5, Size: Large, 3, EA; LI 026, GPS, Garmin, 3, EA; LI 027, Mirror Star, Signal, 2"x3", 24, EA; LI 028, Hydration System, Blackhawk Torrent Extreme II, 100 oz, 36, EA; LI 029, Light Weight Tactical Mirror 6" Collapsible, 24, EA; LI 030, Hood, Nomes, Size: Small, Color-Black, 3, EA; LI 031, Hood, Nomes, Size: Medium, Color-Black, 18, EA; LI 032, Hood, Nomes, Size: Large, Color-Black, 3, EA; LI 033, Chemlight, Green 12 Hour, 2, CS; LI 034, Chemlight, Red 12 hour, 2, CS; LI 035, Chemlight, Blue 8 Hour, 2, EA; LI 036, Tactical Search Mirror 5\40\Fixed Length: Features Brackets for either 2 or 3 D Cell Flashlights. Reflects off mirror and an adjustable Convex Mirror, 3, EA; LI 037, Team Wendy ZAP Balistic Helmet Replacement Pad Kit, 24, KT; LI 038, MICH Chin Strap Assembly, 24, EA; LI 039, Cuff Cutter, 24, EA; LI 040, Gloves, Blackhawk Aviator OPS, Coyote Tan, Size: Medium, 12, PR; LI 041, Gloves, Blackhawk Aviator OPS, Coyote Tan, Size: Large, 12, EA; LI 042, Gloves, Blackhawk Aviator OPS, Coyote Tan, Size: Extra Large, 12, EA; LI 043, Binoculars, 10x50 Stiener Police Model, 6, EA; LI 044, Laser Range Finder, 3, EA; LI 045, Trophy Spotting Scope, 15-45x, with case and Tripod, 3, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, Department of State intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. Department of State is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. If Seller is bidding Cisco brand equipment, Seller certifies that it is a Cisco Authorized Channel as of the date of the submission of its Bid, and that it has the certification/specialization level required by Cisco to support both the product sale and product pricing, in accordance with applicable Cisco certification/specialization requirements.Unless otherwise specified, Seller warrants that the products are new and in their original box(es). The Seller confirms to have sourced all Cisco products submitted in this Bid from Cisco or through Cisco Authorized Channels only, in accordance with all applicable laws and Cisco?s current applicable policies at the time of purchase. If software is provided or included, Seller shall, upon request, provide Buyer with a copy of the End User License Agreement. Seller certifies that all Cisco software is licensed originally to Buyer as the original licensee authorized to use the Cisco Software. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 60 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. Offeror must be registered in the Central Contractor Registration (CCR) database before an award can be made to them. If the offeror is not registered in the CCR, it may do so through the CCR website at http://www.ccr.gov. Delivery must be made within 60 days or less after receipt of order (ARO). The offeror must provide within its offer the number of days - not to exceed 60 - required to make delivery after it receives a purchase order from the buyer. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. Award will be made to the responsible Seller whose offer conforming to the solicitation will be most advantageous to the Buyer on the basis of price, technical capability, delivery, and past performance. The Buyer will review the bids and make a selection on FedBid. Selected Seller means the Seller that submits the Selected Bid. Selected Bid means a Bid submitted by a Seller in response to an IFB, which Bid meets or exceeds the Buyer?s requirements and is accepted by the Buyer pursuant to the terms of the Bid. Participating sellers will note that there may be a 4 to 6 week delay from the time that the Selected Seller receives notification from FedBid to the time that the Selected Seller receives the award document from the Department of State. FedBid will invoice the Selected Seller after the Buyer has accepted a Seller?s bid. The FedBid invoice will include system-generated competition-specific information for identification and referencing purposes. The Selected Seller is responsible for remitting any FedBid fee once they have received payment from the Department of State. The official award document from the Department of State will contain information on how the Selected Seller invoices the Buyer. The official award document from the Department of State will provide the delivery timeline information and the award date on the document is when the official delivery time clock begins. Sellers cannot: combine order shipments, perform drop shipments. A requisition number or credit card number MUST be identified with the shipment and All shipments MUST include the Packing List. For the line items designated as [Brand Name or Equal], the Buyer is allowing Sellers to submit bids for alternate products as long as the bid specification 'Brand Name or Equal' the requested specification. Sellers MUST enter exactly what they are bidding (including make, model, and description) into the blank description field in order for the bid to be considered.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/State/FedBid.com/FedBid1/FY12-GM-118/listing.html)
- Place of Performance
- Address: Multiple shipping information.
- Zip Code: Multiple
- Zip Code: Multiple
- Record
- SN02723416-W 20120418/120416235528-82647049e4308d56df9d2e65522a1132 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |