MODIFICATION
J -- DRY DOCK REPAIRS FOR USCGC SANIBEL (WPB-1312)
- Notice Date
- 4/13/2012
- Notice Type
- Modification/Amendment
- NAICS
- 336611
— Ship Building and Repairing
- Contracting Office
- Department of Homeland Security, United States Coast Guard (USCG), USCG Surface Forces Logistics Center (SFLC) Procurement Branch 1, 300 East Main Street, Suite 600, Norfolk, Virginia, 23510-9102, United States
- ZIP Code
- 23510-9102
- Solicitation Number
- HSCG80-12-R-P45J94
- Archive Date
- 5/3/2012
- Point of Contact
- Shavonda A. Jamison, Phone: 757-441-7036, Susan A. Kreider, Phone: 7576284644
- E-Mail Address
-
Shavonda.Jamison@uscg.mil, susan.a.kreider@uscg.mil
(Shavonda.Jamison@uscg.mil, susan.a.kreider@uscg.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- This amendment is issue to correct the due date on the Federal Business Opportunity website to reflect the correct due date for proposals. The due date for proposals is corrected to April 18, 2012 at 3:00pm Eastern Standard Time. This due date is reflected on the RFP. If you have any questions, please contact Shavonda Jamison at 757-441-7036 or at shavonda.jamison@uscg.mil. Please note that the RFP will be issued on March 22, 2012 and close on April 18, 2012 at 3:00pm Eastern Standard Time. SYNOPSIS: DRY DOCK REPAIRS USCGC SANIBEL (WPB-1312) The United States Coast Guard Surfaces Forces Logistics Center (SFLC) Norfolk, VA is procuring Dry Dock Repairs Services for the U.S. Coast Guard Cutter (USCGC) SANIBEL (WPB-1312) under REQUEST FOR PROPOSAL (RFP) HSCG80-12-R-P45J94. This requirement is Set-Aside 100% for Small Businesses firms pursuant to the Small Business Act and FAR Part 19.14. All Small Business Concerns may submit offers, which shall be considered by the United States Coast Guard. The applicable North American Industry Classification System (NAICS) Code is 336611 for SHIP BUILDING AND REPAIRING with a Size Standard of 1,000 employees. For the calculation of annual receipts and number of employees see parts 121.104 and 121.106 in SBA's Small Business Size Regulations, http://www.sba.gov/regulations/121/. The RFP will be issued pursuant to FAR 12, Acquisition of Commercial Items and FAR Part 15, Contracting by Negotiation. The Coast Guard intends to award a fixed price contract resulting from this solicitation to a responsive, responsible contractor whose written proposal is considered most advantageous to the Government both in price and other factors considered. The following factors shall be used to evaluate offerors' proposals and are in descending order of importance: 1. Past Performance 2. Price Factors 1-2 will be applied to determine the best value to the Government. Please note Past performance is significantly more important than price. The RFP/solicitation HSCG80-12-R-P45J94 will be issued on or about March 22, 2012 with a closing date for receipt of PROPOSALS on April 18, 2012, 3:00 P.M EST. The RFP will be posted on the Governmentwide Point of Entry (GPE), FEDBIZOPPS, which may be accessed via the Internet at www.fedbizopps.gov or https://www.fbo.gov. Please sign up for the Auto Notification Service to receive an email from Federal Business Opportunity website when an action is taken under this solicitation. No paper copies of the solicitation and/or amendments will be distributed. QUESTIONS AND REQUEST FOR DRAWINGS: All reference documents are available for viewing at 300 East Main Street Suite 600 Norfolk VA 23510-9102. Drawings will be available on CD-ROM. The CD-ROM is available free of charge to contractors upon request no later than four (4) days from the solicitation issuance. The CD-ROM (s) contain WINDOWS compliant raster/vector formats (e.g. *.DWF, etc). The last day to submit questions regarding this solicitation is on or about April 04, 2012 at 3:00pm EST. After this date further requests may not be accepted due to time constraints. PLACE OF PERFORMANCE: Contractor's Facility GEOGRAPHIC RESTRICTION: This vessel is geographically restricted to 540 Nautical miles one way, or 1080 Nautical mile round trip from the cutter's homeport of Woods Hole, MA. SCOPE OF WORK: The scope of the acquisition is for the dry docking and repairs of the USCGC SANIBEL (WPB-1312). This work will include, but is not limited to the following items: WORK ITEM 1: Hull Plating, U/W Body, Inspect WORK ITEM 2: Hull Plating (U/W Body), Ultrasonic Testing WORK ITEM 3: Aluminum Hull and Structural Repairs - 1/4" Plate WORK ITEM 4: Aluminum Hull and Structural Repairs - 3/16" Plate WORK ITEM 5: Aluminum Hull and Structural Repairs - 5/16" Plate WORK ITEM 6: Hull and Structural Plating Repairs -Crack (Aluminum) WORK ITEM 7: Hull and Structural Plating Repairs - Crack (Steel) WORK ITEM 8: Hull and Structural Plating Repairs - Eroded Weld (Aluminum)WORK ITEM 9: Steel Hull and Structural Plating Repairs (5-Pound) WORK ITEM 10: Steel Hull and Structural Plating Repairs ( 7.0 Pound, 7.5-Pound or 7.65-Pound) WORK ITEM 11: Steel Hull and Structural Plating Repair s, Corrugated Plate (4.0-Pound) WORK ITEM 12: Hull and Structural Plating Repairs (6.0-Pound or 5.63-Pound)WORK ITEM 13: Appendages (U/W), Leak Test WORK ITEM 14: Appendages (U/W) - Internal, Preserve WORK ITEM 15: Tanks ( Fuel Service), Clean and Inspect WORK ITEM 16: Voids (Non-Accessible), Leak Test WORK ITEM 17: Tanks ( Fuel Stowage and Overflow), Clean and Inspect WORK ITEM 18: Voids (Non-Accessible), Preserve Internal Surfaces WORK ITEM 19: Tanks (Potable Water), Clean and Inspect WORK ITEM 20: 30-Tanks (Dirty Oil and Waste), Clean and Inspect WORK ITEM 21: Propulsion System, Alignment Check WORK ITEM 22: Propulsion Shafting, Remove, Inspect, and Reinstall WORK ITEM 23: Mechanical Shaft Seal Assemblies, Overhaul WORK ITEM 24: Propulsion Shafting Bearings (External), Renew WORK ITEM 25: Prop ulsion Shaft Stern Tube Bearings, Renew WORK ITEM 26: Propellers ; Remove, Inspect, and Reinstall WORK ITEM 27: Exhaust System, MDE, Inspect WORK ITEM 28: SW Heat Exchangers, Clean, Inspect and Hydro WORK ITEM 29: Fathometer Transducer, Renew WORK ITEM 30: Speed Doppler, Renew, Doppler Valve, Overhaul WORK ITEM 31: Sea Strainers (All Sizes), Renew WORK ITEM 32: Sea Strainers - Duplex (All Sizes), Overhaul WORK ITEM 33: Steering Gear (General), Overhaul WORK ITEM 34: Rudder Assembly, Remove, Inspect and Reinstall WORK ITEM 35: Fin Stabilizers (General), Overhaul WORK ITEM 36: Tanks, (Grey Water) Clean and Inspect WORK ITEM 37: Tanks, ( Sewage Holding ) Clean and Inspect WORK ITEM 38: Grey Water Piping, Clean and Flush WORK ITEM 39: Sewage Piping, Clean and Flush (D) WORK ITEM 40: Forward Peak Compartment, Preserve WORK ITEM 41: CPO Stateroom, Preserve WORK ITEM 42: Aft Steering Compartment, Preserve and Insulate WORK ITEM 43: Forward Void, Preserve WORK ITEM 44: Tanks ( Sewage Holding ), Preserve " 100% " (O) WORK ITEM 45: Tanks ( Aft Grey Water ), Preserve " 100% " WORK ITEM 46: Tanks (Dirty Oil ), Preserve " 100% " WORK ITEM 47: Tanks (Potable Water), Preserve " 100% " WORK ITEM 48: Bilge Surfaces, Preserve WORK ITEM 49: Battery Space, Preserve and Insulate WORK ITEM 50: U/W Body, Preserve "100%" WORK ITEM 51: U/W Body, Preserve "Partial - Condition A " WORK ITEM 52: U/W Body, Preserve "Partial - Condition B" WORK ITEM 53: U/W Body, Preserve "Partial - Condition C " WORK ITEM 54: Stern Tube Interior Surfaces, Preserve 100% WORK ITEM 55: Hull Plating Freeboard, Preserve " 100% " WORK ITEM 56: Hull Pl ating, Freeboard; Preserve (Partial ) WORK ITEM 57: Superstructure, Preserve "100%" WORK ITEM 58: Superstructure, Preserve " Partial " WORK ITEM 59: Cathodic Protection System, Inspect and Maintain WORK ITEM 60: CAPAC Anode Assembly Renew WORK ITEM 61: Drydocking WORK ITEM 62: Temporary Services, Provide WORK ITEM 63: Data Service, Provide WORK ITEM 64: Deck Covering (Wet/Dry), Seal WORK ITEM 65: Hull Plating ( Freeboard), Ultrasonic Testing WORK ITEM 66: Pilothouse Deck (Aluminum), Inspect WORK ITEM 67: Rudder(s), Preserve ( "100%" ) WORK ITEM 68: Electro-Hydraulic Crane, Renew WORK ITEM 69: Tank ( Oily Water ), Preserve 100% WORK ITEM 70: Watertight Doors and Scuttles (Internal, DC Deck and Below), Renew WORK ITEM 71: Sea Valves and Waster Pieces, Overhaul or Renew WORK ITEM 72: Deck Covering (Carpeting), Renew All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualification procedures. PERIOD OF PERFORMANCE: The period of performance is anticipated to be for FIFTY-NINE (59) calendar days with a start date on or about August 1, 2012 and an end date on or about September 28, 2012. CCR: Interested parties should register in the Central Contractor Registration (CCR) as prescribed in FAR Clause 52.232-33. The CCR can be obtained by accessing the internet at www.ccr.gov or by calling 1-888-227-2423. All parties are encouraged to continually monitor the Federal Business Opportunity website for any amendments to the solicitation. All questions concerning this requirement shall be submitted in writing to Shavonda Jamison at Shavonda.Jamison@uscg.mil.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DHS/USCG/COUSCGMLCA/HSCG80-12-R-P45J94/listing.html)
- Place of Performance
- Address: Contractor's Facility within 540 Nautical miles one way or 1080 Nautical miles round trip from Woods Hole MA, United States
- Record
- SN02722471-W 20120415/120413235856-bbe1d649fe4302efb6d5f95802c9452e (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |