SOLICITATION NOTICE
28 -- SEAL,METALLIC,AIRCR
- Notice Date
- 4/5/2012
- Notice Type
- Presolicitation
- NAICS
- 336412
— Aircraft Engine and Engine Parts Manufacturing
- Contracting Office
- DEPARTMENT OF THE AIR FORCE; BLDG 3001 SUITE 2AH82A; TINKER AFB;OK; 73145
- ZIP Code
- 73145
- Solicitation Number
- FA8121-12-B-0001
- Response Due
- 5/21/2012
- Point of Contact
- Jay Wallar, Phone 405-734-4637, Fax 000-000-0000, Emaildonald.wallar@tinker.af.mil
- E-Mail Address
-
Jay Wallar
(donald.wallar@tinker.af.mil)
- Small Business Set-Aside
- N/A
- Description
- Synopsis - F100-229 #1 Carbon Seal, Metallic FA8121-12-B-0001 1. ESTIMATED SOLICITATION ISSUE DATE: 20 April 2012 ESTIMATED SOLICITATION CLOSING/RESPONSE DATE: 21 May 2012 SEALED BIDS TO BE OPEN AT 3:00PM CST ANTICIPATED AWARD DATE: 27 July 2012 2. PR#: FD2030-12-36149 3. TYPE BUY: Repair (Remanufacture), Firm Fixed Price. This will be aRequirements contract with a two year basic period and three-one yearoptions. 4. RMC: R1/C 5. ITEM: L/I 0001- #1 Carbon Seal, Metallic, USAF L/I 0002- #1 Carbon Seal, Metallic, FMS L/I 0003- Data and Reports, not separately priced L/I 0004- Over and Above, to be negotiated. 6. NSN: L/I 0001 NSN 2840-01-319-9945NZ L/I 0002 NSN 2840-01-316-9945NZ 7. P/N: L/I 0001: 4054085-01 or 4084085-01D L/I 0002: 4054085-01 or 4084085-01D 8. DESCRIPTION: LI 0001 Diameter 5.5" Width 1.5" Item Material:Carbon LI 0002 Diameter 5.5" Width 1.5"Item Material: Carbon ITEM FUNCTION: LI 0001 SEALS OIL ON THE F100PW229 AIRCRAFT ENGINE. LI 0002 SEALS OIL ON THE F100PW229AIRCRAFT ENGINE. 9. QUANTITY/DELIVERY: Best Estimated Quantity (BEQ) and delivery arebelow:LI 0001 - Basic BEQ 48 ea, Option 1 - BEQ 24 ea, Option 2 - BEQ15 ea, Option 3 BEQ 15ea, Delivery: 3 ea/ per month. LI 0002 - Basic BEQ 8 ea, Option 1 - BEQ 4 ea, Option 2 - 4 ea,Option 3 BEQ 4 ea, Delivery 1 Per month ARO 10. APPLICATION: F100-PW-229 Engine 11. DESTINATION: LI 0001 SW3211, Tinker AFB, OK 73145-9013. Mark For:Acct 09-Serviceable stock. LI 0002 TBD 12. QUALIFICATION REQUIREMENTS: Sources must be qualified prior to being considered for award. To be eligible for contract award, theofferor must be an approved source IAW FAR 52.209-1, Qualification Requirements. TheGovernment is not required to delay contract award to review pending Source Approval Requests(SARs). Therefore, offerors are encouraged to submit SARs as soon as possible. Ifthe Government has not completed review of a SAR when the contract is awarded, the SARwill be retained and the source will be reviewed as a possible source for future awards. 13. EXPORT CONTROL: Data is export controlled. Thesolicitation/procurement data list is approved for release only to U.S. DoD contractorswho are registered and certified with the Defense Logistics Information Service (DLIS).Submission of DD Form 2345, Military Critical Technical Data Agreement, with your request forthe solicitation is required as specified in the International Traffic in Arms Regulation (ITAR),22 CFR Sections 121 through 128. Foreign contractors cannot participate as primecontractors. The technical data will not be available until the solicitation is posted. 14. UID: If unit price exceeds $5,000.00 then UID requirements willapply. 15. ADDITIONAL INFORMATION: Electronic procedures and Request forWritten Proposal will be used for this solicitation through FedBizOpps athttps://www.fbo.gov/index. All responsible sources solicited may submit a bid, proposal, orquotation, which shall be considered by the agency.. Based upon market research, the Government is not using thepolicies contained in Part12, Acquisition of Commercial Items, in its solicitation forthe described supplies or services. However, interested persons may identify to thecontracting officer their interest and capability to satisfy the Government's requirementwith a commercial item within 15 days of this notice. OMBUDSMAN NOTE: An Ombudsman has been appointed to hear concernsfrom offerors or potential offerors during the proposal developmentphase of this acquisition. The purpose of the Ombudsman is not to diminish the authority ofthe program director or contracting officer, but to communicate contractor concerns,issues, disagreements, and recommendations to the appropriate government personnel. Whenrequested, the Ombudsman will maintain strict confidentiality as to the sourceof the concern. The Ombudsman does not participate in the evaluation of proposals orin the source selection process. Interested parties are invited to call the Ombudsmanat (405) 736-3273. DO NOT CALL THIS NUMBER FOR SOLICITATION. 16. BUYER NAME, TELEPHONE, EMAIL ADDRESS: Donald Wallar, (405)734-4637, Donald.wallar@tinker.af.mil
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFMC/OCALCCC/FA8121-12-B-0001/listing.html)
- Record
- SN02715388-W 20120407/120406000015-50d910001acd95212278ae93668c47f1 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |