PRESOL | 72 | STEEL RAISED ACCESS FLOORING

FBO DAILY ISSUE OF JANUARY 27, 2012 FBO #3716
SOLICITATION NOTICE

72 -- STEEL RAISED ACCESS FLOORING

Notice Date: 1/25/2012
Notice Type: Combined Synopsis/Solicitation
NAICS: 238330 — Flooring Contractors
Contracting Office: Department of Homeland Security, United States Coast Guard (USCG), USCG Base Support Unit Boston, 427 Commercial Street, Boston, Massachusetts, 02209-1027, United States
ZIP Code: 02209-1027
Solicitation Number: HSCG24-12-Q-PBFB25
Archive Date: 2/17/2012
Point of Contact: Jane H McKenzie, Phone: 617-223-3159
E-Mail Address: jane.mckenzie@uscg.mil
(jane.mckenzie@uscg.mil)
Small Business Set-Aside: Total Small Business
Description: This is a combined solicitation/synopsis for commercial items prepared in accordance with the format in FA Subpart 12.6 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation ; quotes are being requested and a written solicitation will not be issued. HSCG24-12-Q-PBFB25 is issued as a Request for Quotations. The incorporated provisions and clauses are those in effect through Federal Acquisition circular 2005-53. This is a Total Small Business Set Aside procurement ; the applicable NAICS is 238330 and the small business size standard is $12.0 Million. USCG BSU Boston has a requirement to purchase raised steel access flooring. *Delivery to USCG BSU Boston, 427 Commercial St., Boston MA 02109. *Delivery date required: no later than 22 FEB 2012 *Contractors submitting quotes shall include delivery costs and tech representative on site per below with quote. SITE VISIT: Site visit shall be conducted: 4:00 PM EST on Thursday 26 Jan 2012 and 10:00 AM EST on MONDAY 30 Jan 2012. Assemble at guard shack, USCG BSU Boston, 427 Commercial St., Boston MA 02109 With photo ID. No parking is available at USCG BSU Boston for Site visit. ***Contractors submitting quotes shall provide an itemized quote to include specific pricing of components items as detailed in scope of work -including the requirement for a company technical representative on site for minimum of 6 hours to assist Government in initial layout and installation procedures. **Quotes are due: 2 FEB 2012 **Quotes may be faxed to: 617-223-3145 * Scope of work to provide 2,220 s/f of 1.6 inch steel access flooring. USCG BSU Boston will install the flooring. DELIVERY LOCATION SCG BSU Boston 427 Commercial Street Boston, MA 02109 Contractor to provide all materials and deliver to USCG Base Boston at the above address, 2,220 s/f of 1.6 inch high steel access flooring, twenty two combination 110V power and voice "in floor" utility boxes with covers and 3 ramps as specified below and as shown on attached plot plan. The "or equal" definition for this requirement is based on the following key performance factors, any product proposed other than the equipment listed shall meet or exceed the following characteristics, if vendor proposes an "or equal" offering, contractor shall submit manufactures data sheet WITH PROPOSAL that shows that proposed equipment meets or exceeds the following key performance factors. Freeaxez 40, 1.6 inch high conforming to Master Format 096933 meets or exceeds all requirements. www.freeexez.com. Vendors are strongly encouraged to visit site to view actual conditions. ***Post award, the successful vendor shall send to the site a technical representative for a minimum of 6 hours total to assist the Government in initial layout and installation procedures. 1.6-INCH LOW-PROFILE ACCESS FLOOR PART 1 - GENERAL 1.1 DESCRIPTION This section includes the following: A. Low-profile access floor system consisting of a series of modular, removable, interchangeable steel base units, corner plates, channel plates, border units and accessories that form an accessible under floor cavity to accommodate electrical, voice and data services. B. System shall be gravity held on a structural subfloor system designed to support all loads required by the IBC or local code requirements, whichever is the more stringent. Existing floor is commercial direct glue carpet and will not be removed. No under sheet fabric or foam is required. C. All flooring system structural components shall be steel. Maximum height from subfloor to top of access flooring system shall not exceed 1.6 inches. D. Floor units shall be removable by one person without the need for tools or special lifting devices. E. Low-profile access floor system is not intended for use as a duct, plenum or air handling space. As such, non-plenum rated cabling is permitted under the low-profile access floor. 1.2 DESIGN CRITERIA A. Provide access flooring systems capable of withstanding uniform and concentrated loads as set forth in Table 1607.1 of the IBC or local code requirements, whichever is the more stringent, as determined by testing manufacturer's products. UL listed. 1.3 PERFORMANCE REQUIREMENTS C. All Base Units / Channel Plates / Corner Plates: 1. Floor assembly: Floor assembly to be rigid, free of vibration, rocking parts, rattles and squeaks. 2. Air Leakage: Air space below the finished floor assembly does not serve as a plenum. As such no limits are placed on air leakage through the joints between base units, channel plates and corner plates and around the perimeter of the floor assembly. 3. Seismic: All load carrying storage units and other heavy equipment shall be anchored directly to the existing structure so as to resist design seismic loads Exposed Metal: Exposed metal shall not be allowed at the wearing surface of the floor. 4. Flame Spread Rating: Flame spread and smoke development rating of low-profile access floor system when tested per ASTM E-84, shall conform to the IBC or local code requirements, whichever is the more stringent, but shall not be less than: a. Class A Rating (Flame Spread < 25, Smoke Development < 75). 5. Combustible Rating: Combustible rating of low-profile access floor system when tested per ASTM E-136, shall conform to the IBC or local code requirements, whichever is the more stringent, but at a minimum shall be classified as: a. Non-Combustible. 6. Corrosion Resistance: Galvanizing thickness rating of metallic outlet boxes and base units, corner plates, channel plates and border units when tested per UL514A, shall conform to the IBC or local code requirements, whichever is the more stringent, but shall not be less than: a. Galvanized Coating - G40 Minimum (Per ASTM A-653) 2.1 COMPONENTS A. FA-40 (1.6") 1. Standard FA-40 Components - ASTM A653 Galvanized Steel a. Base Unit/FA-4001 - 14.6"x14.6"x1.6". All steel, smooth surfaces with integral support legs. b. Corner Plate/FA-4002 - 7.8"x7.8". c. Channel Plate/FA-4003 - 11.7"x5.0". 2. FA-40 Border Components a. Half Unit/FA-4101 b. Half Channel/FA-4102 c. L-type Border/FA-4103 d. End Cover/FA-4104 e. Reinforcing Band/FA-4105 f. Trapezoid Plate/FA-4106 g. L-type Trapezoid/FA-4107 h. Jumbo Plate/FA-4108 3. FA-40 Optional Components a. Slope 1:12 (steel)/FA-4419- (Ramp) b. External-angle slope/FA-4419EX (Ramp) c. Internal-angle slope/FA-4419IN (Ramp) d. Frame (stainless)/FA-4206 (Edge Riser front closure) - Where exposed to view. e. Corner Frame (stainless) - 6-inch /FA-4207 f. Corner Frame (stainless) - 16-inch/FA-4208 g. Frame end cap (stainless)/FA-4209 (Edge Riser end closure) - Where exposed to view. h. Outlet Cover/FA-4212 i. Wiring outlet/FA-4214 (Corner plate with oval grommet) j. Wiring outlet/FA-4215 (Channel plate with oval grommet) 4. Ramps: Manufacturer's standard ramp construction of width and slope indicated (minimum 1:12). 2.2 ELECTRICAL BOXES A. Provide electrical boxes to make floor assembly with openings perform the same as continuous base units, channel plates and/or corner plates. 2.3 TOLERANCE A. Construct base units, channel plates and corner plates to be uniform in face dimensions within the following tolerances: 1. Base units shall be 14.567" x 14.567" ± 0.015" (370 mm by 370 mm ± 0.38mm), 2. Channel plates shall 11.732" x 4.961" ± 0.015" (298 mm by 126 mm ± 0.38mm), 3. Corner plates shall be 7.795" x 7.795" ± 0.015" (198 mm by 198 mm ± 0.38mm). 4. All parts to be square within a tolerance of ± 0.015-inches (± 0.38 mm) and exhibit flatness within a tolerance of ± 0.02-inches (± 0.5 mm). B. Construct base units, channel plates and corner plates from material of uniform thickness within the following tolerances: 1. 0.035" ± 0.002" 2. 0.045" ± 0.002" 3. 0.060" ± 0.002" C. Individual parts to be easily placed and removed, without disturbing adjacent assembly, by one person with no special tools. Company's quote(s) should include: 1. The solicitation number; 2. The time specified in the solicitation for receipt of offers; 3. The name, address, and telephone number of the offeror; 4. A technical description of the items being offered in such detail to evaluate compliance with the requirements in the solicitation. This may include product literature or other documents if necessary; 5. Terms of any express warranty; 6. Price, availability, and any discount terms; 7. Remit to address if different from mailing address; 8. A copy of the representations and certifications at FAR 52.212-3 (see FAR 52.212-3 (j) for those representations and certifications that the offeror shall complete electronically); 9. Acknowledgement of solicitation amendments; 10. Past performance information, when included as an evaluation factor, to include recent and relevant contracts for the same of similar items and references (including contract numbers, points of contact with telephone numbers and other relevant information); 11. If the offer is not submitted on a SF1449, include a statement specifying the extant of agreement with all terms, conditions and provisions included in the solicitation. Offers that fail to furnish the required representations of information, or reject the terms, and conditions of the solicitation may be excluded from consideration; 12. Company Tax Information and DUNS number. All responsible sources may submit a quotation, which if timely received, shall be considered by the agency. The following FAR provisions/clauses apply to this solicitation. Offerors may obtain the full text versions of theses clauses electronically at http://www.arnet.gov/far FAR 52.237-1 Site Visit (APR 1984) Offerors or quoters are urged andexpcted to inspect the site where the services are to be performed and tosatisfy themselves regarding all general and local conditions that may affect the cost of contract performance, to the extent that such information is reasonably obtainable. In no event shall failure to inspect the site constitute grounds for a claim afteraward. Site visit for measurements FAR 52.215-5 Facsimilie Proposals. Facsimilie quotes will be accepted. Fax number: 617-223-3145 FAR 52.212-1 Instructions to Offerors-Commercial Items (JUNE 2008) FAR 52.212-2 Evaluation-Commercial Items (JAN 1999) the evaluation criteria will be technical adherence to specifications, price, delivery time FAR 52.212-3 Offeror Representations and Certifications-Commercial Items (NOV 2011) FAR 52.212-4 Contract Terms and Conditions-Commercial Items (JUNE 2010) The following provisions of FAR 52.212-5 (JAN 2012) are incorporated 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items. As prescribed in 12.301(b)(4), insert the following clause: Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items (Jan 2012) (a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (1) 52.222-50, Combating Trafficking in Persons (Feb 2009) (22 U.S.C. 7104(g)). ___Alternate I (Aug 2007) of 52.222-50 (22 U.S.C. 7104(g)). (2) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553). (3) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Pub. L. 108-77, 108-78). (b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: [Contracting Officer check as appropriate.] _X_ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C. 253g and 10 U.S.C. 2402). _X_ (12)(i) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2011) (15 U.S.C. 644).. _X_ (17) 52.219-14, Limitations on Subcontracting (Nov 2011) (15 U.S.C. 637(a)(14)). _X_ (27) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (Jul 2010) (E.O. 13126). _X_ (31) 52.222-36, Affirmative Action for Workers with Disabilities (Oct 2010) (29 U.S.C. 793). _X_ (39) 52.225-1, Buy American Act-Supplies (Feb 2009) (41 U.S.C. 10a-10d). __ (40)(i) 52.225-3, Buy American Act-Free Trade Agreements-Israeli Trade Act (June 2009) (41 U.S.C. 10a-10d, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, Pub. L. 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, and 110-138). _X_ (42) 52.225-13, Restrictions on Certain Foreign Purchases (June 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury). _X_ (47) 52.232-33, Payment by Electronic Funds Transfer-Central Contractor Registration (Oct 2003) (31 U.S.C. 3332). HSAR 3052.209-70 PROHIBITION ON CONTRACTS WITH CORPORATE EXPATRIATES (Jun 2006). (a) Prohibitions. Homeland Security Act, Section 835 of the Homeland Security Act, 6 U.S.C. 395 would be, treated as a foreign corporation for purposes of the Internal Revenue Code of 1986. held- In the case of an acquisition with respect to a domestic corporation, by former shareholders of the domestic corporation by reason of holding stock in the domestic corporation; or (ii) In the case of an acquisition with respect to a domestic partnership, by former partners of the domestic partnership by reason of holding a capital or profits interest in the domestic partnership; and (3) The expanded affiliated group which after the acquisition includes the entity does not have substantial business activities in the foreign country in which or under the law of which the entity is created or organized when compared to the total business activities of such expanded affiliated group. Person, domestic, and foreign have the meanings given such terms by paragraphs (1), (4), and (5) of section 7701(a) of the Internal Revenue Code of 1986, respectively. (c) Special rules. The following definitions and special rules shall apply when determining whether a foreign incorporated entity should be treated as an inverted domestic corporation. (1) Certain stock disregarded. For the purpose of treating a foreign incorporated entity as an inverted domestic corporation these shall not be taken into account in determining ownership: (i) stock held by members of the expanded affiliated group which includes the foreign incorporated entity; or (ii) stock of such entity which is sold in a public offering related to the acquisition described in subsection (b)(1) of Section 835 of the Homeland Security Act, 6 U.S.C. 395(b)(1). (2) Plan deemed in certain cases. If a foreign incorporated entity acquires directly or indirectly substantially all of the properties of a domestic corporation or partnership during the 4-year period beginning on the date which is after the date of enactment of this Act and which is 2 years before the ownership requirements of subsection (b)(2) are met, such actions shall be treated as pursuant to a plan. (3) Certain transfers disregarded. The transfer of properties or liabilities (including by contribution or distribution) shall be disregarded if such transfers are part of a plan a principal purpose of which is to avoid the purpose of this section. (d) Special rule for related partnerships. For purposes of applying section 835(b) of the Homeland Security Act, 6 U.S.C. 395(b) to the acquisition of a domestic partnership, except as provided in regulations, all domestic partnerships which are under common control (within the meaning of section 482 of the Internal Revenue Code of 1986) shall be treated as a partnership. (e) Treatment of Certain Rights. (1) Certain rights shall be treated as stocks to the extent necessary to reflect the present value of all equitable interests incident to the transaction, as follows: (i) Warrants; (ii) Options; (iii) Contracts to acquire stock; (iv) Convertible debt instruments; (v) Others similar interests. (2) Rights labeled as stocks shall not be treated as stocks whenever it is deemed appropriate to do so to reflect the present value of the transaction or to disregard transactions whose recognition would defeat the purpose of section 835. (f) Disclosure. The offeror under this solicitation represents that {Check one}: __ it is not a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73; __it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria (HSAR) 48 CFR 3009.104-70 through 3009.104-73, but it has submitted a request for waiver pursuant to 3009.104-74, which has not been denied; or __it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria (HSAR) 48 CFR 3009-.104-70 through 3009.104-73, but plans to submit a request for waiver pursuant to 3009.104-74. (g) A copy of the approved waiver, if a waiver has already been granted, or the waiver request, if a waiver has been applied for, shall be attached to the bid or proposal. (End of provision) 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards. As prescribed in 4.1403(a), insert the following clause: Reporting Executive Compensation and First-Tier Subcontract Awards (Jul 2010) (a) Definitions. As used in this clause: "Executive" means officers, managing partners, or any other employees in management positions. "First-tier subcontract" means a subcontract awarded directly by a Contractor to furnish supplies or services (including construction) for performance of a prime contract, but excludes supplier agreements with vendors, such as long-term arrangements for materials or supplies that would normally be applied to a Contractor's general and administrative expenses or indirect cost. "Total compensation" means the cash and noncash dollar value earned by the executive during the Contractor's preceding fiscal year and includes the following (for more information see 17 CFR 229.402(c)(2)): (1) Salary and bonus. (2) Awards of stock, stock options, and stock appreciation rights. Use the dollar amount recognized for financial statement reporting purposes with respect to the fiscal year in accordance with the Statement of Financial Accounting Standards No. 123 (Revised 2004) (FAS 123R), Shared Based Payments. (3) Earnings for services under non-equity incentive plans. This does not include group life, health, hospitalization or medical reimbursement plans that do not discriminate in favor of executives, and are available generally to all salaried employees. (4) Change in pension value. This is the change in present value of defined benefit and actuarial pension plans. (5) Above-market earnings on deferred compensation which is not tax-qualified. (6) Other compensation, if the aggregate value of all such other compensation (e.g., severance, termination payments, value of life insurance paid on behalf of the employee, perquisites or property) for the executive exceeds $10,000. (b) Section 2(d)(2) of the Federal Funding Accountability and Transparency Act of 2006 (Pub. L. 109-282), as amended by section 6202 of the Government Funding Transparency Act of 2008 (Pub. L. 110-252), requires the Contractor to report information on subcontract awards. The law requires all reported information be made public, therefore, the Contractor is responsible for notifying its subcontractors that the required information will be made public. (c)(1) Unless otherwise directed by the contracting officer, by the end of the month following the month of award of a first-tier subcontract with a value of $25,000 or more, (and any modifications to these subcontracts that change previously reported data), the Contractor shall report the following information at http://www.fsrs.gov for each first-tier subcontract. (The Contractor shall follow the instructions at http://www.fsrs.gov to report the data.) (i) Unique identifier (DUNS Number) for the subcontractor receiving the award and for the subcontractor's parent company, if the subcontractor has a parent company. (ii) Name of the subcontractor. (iii) Amount of the subcontract award. (iv) Date of the subcontract award. (v) A description of the products or services (including construction) being provided under the subcontract, including the overall purpose and expected outcomes or results of the subcontract. (vi) Subcontract number (the subcontract number assigned by the Contractor). (vii) Subcontractor's physical address including street address, city, state, and country. Also include the nine-digit zip code and congressional district. (viii) Subcontractor's primary performance location including street address, city, state, and country. Also include the nine-digit zip code and congressional district. (ix) The prime contract number, and order number if applicable. (x) Awarding agency name and code. (xi) Funding agency name and code. (xii) Government contracting office code. (xiii) Treasury account symbol (TAS) as reported in FPDS. (xiv) The applicable North American Industry Classification System code (NAICS). (2) By the end of the month following the month of a contract award, and annually thereafter, the Contractor shall report the names and total compensation of each of the five most highly compensated executives for the Contractor's preceding completed fiscal year at http://www.ccr.gov, if- (i) In the Contractor's preceding fiscal year, the Contractor received- (A) 80 percent or more of its annual gross revenues from Federal contracts (and subcontracts), loans, grants (and subgrants) and cooperative agreements; and (B) $25,000,000 or more in annual gross revenues from Federal contracts (and subcontracts), loans, grants (and subgrants) and cooperative agreements; and (ii) The public does not have access to information about the compensation of the executives through periodic reports filed under section 13(a) or 15(d) of the Securities Exchange Act of 1934 (15 U.S.C. 78m(a), 78o(d)) or section 6104 of the Internal Revenue Code of 1986. (To determine if the public has access to the compensation information, see the U.S. Security and Exchange Commission total compensation filings at http://www.sec.gov/answers/execomp.htm.) (3) Unless otherwise directed by the contracting officer, by the end of the month following the month of a first-tier subcontract with a value of $25,000 or more, and annually thereafter, the Contractor shall report the names and total compensation of each of the five most highly compensated executives for each first-tier subcontractor for the subcontractor's preceding completed fiscal year at http://www.fsrs.gov, if- (i) In the subcontractor's preceding fiscal year, the subcontractor received- (A) 80 percent or more of its annual gross revenues from Federal contracts (and subcontracts), loans, grants (and subgrants) and cooperative agreements; and (B) $25,000,000 or more in annual gross revenues from Federal contracts (and subcontracts), loans, grants (and subgrants) and cooperative agreements; and (ii) The public does not have access to information about the compensation of the executives through periodic reports filed under section 13(a) or 15(d) of the Securities Exchange Act of 1934 (15 U.S.C. 78m(a), 78o(d)) or section 6104 of the Internal Revenue Code of 1986. (To determine if the public has access to the compensation information, see the U.S. Security and Exchange Commission total compensation filings at http://www.sec.gov/answers/execomp.htm.) (d)(1) If the Contractor in the previous tax year had gross income, from all sources, under $300,000, the Contractor is exempt from the requirement to report subcontractor awards. (2) If a subcontractor in the previous tax year had gross income from all sources under $300,000, the Contractor does not need to report awards to that subcontractor. (e) Phase-in of reporting of subcontracts of $25,000 or more. (1) Until September 30, 2010, any newly awarded subcontract must be reported if the prime contract award amount was $20,000,000 or more. (2) From October 1, 2010, until February 28, 2011, any newly awarded subcontract must be reported if the prime contract award amount was $550,000 or more. (3) Starting March 1, 2011, any newly awarded subcontract must be reported if the prime contract award amount was $25,000 or more. (End of clause) NOTICE FOR FILING AGENCY PROTESTS It is the policy of the United States Coast Guard (USCG) to issue solicitations and make contract awards in a fair and timely manner. The Ombudsman Program for Agency Protests (OPAP) was established to investigate agency protest issues and resolve them without expensive and time-consuming litigation. OPAP is an independent reviewing authority that is empowered to grant a prevailing protester essentially the same relief as the General Accountability Office (GAO). Interested parties are encouraged to seek resolution of their concerns within the USCG as an Alternative Dispute Resolution (ADR) forum, rather than filing a protest with the GAO or some external forum. Interested parties may seek resolution of their concerns informally or opt to file a formal agency protest with the contracting officer or Ombudsman. Informal forum with the Ombudsman. Interested parties who believe a specific USCG procurement is unfair or otherwise defective should first direct their concerns to the cognizant contracting officer. If the contracting officer is unable to satisfy the concerns, the interested party is encouraged to contact the USCG Ombudsman for Agency Protests. Under this informal process, the agency is not required to suspend contract award performance. Use of an informal forum does not suspend any time requirement for filing a protest with the agency or other forum. In order to ensure a timely response, interested parties should provide the following information to the Ombudsman: solicitation/contract number, contracting office, contracting officer, and solicitation closing date (if applicable). Formal Agency Protest with the Ombudsman. Prior to submitting a formal agency protest, protesters must first use their best efforts to resolve their concerns with the contracting officer through open and frank discussions. If the protester's concerns are unresolved, an independent review is available by the Ombudsman. The protester may file a formal agency protest to either the contracting officer or as an alternative to that, the Ombudsman under the OPAP program. Contract award or performance will be suspended during the protest period unless contract award or performance is justified, in writing, for urgent and compelling reasons or is determined in writing to be in the best interest of the Government. The agency's goal is to resolve protests in less than 35 calendar days from the date of filing. Protests shall include the information set forth in FAR 33.103. If the protester fails to submit the required information, resolution of the protest may be delayed or the protest may be dismissed. This will not preclude re-filing of the protest to meet the requirement. To be timely, protests must be filed within the period specified in FAR 33.103(e). Formal protests filed under the OPAP program should be submitted to: Department of Homeland Security United States Coast Guard (CG-9131) Ombudsman Program for Agency Protests 1900 Half Street, SW, Room 11-0602 Washington, D. C. 20593-0001 FAX: 202.475.3904 The Ombudsman Hotline telephone number is 202.372.3695
Web Link: FBO.gov Permalink
(https://www.fbo.gov/spg/DHS/USCG/COUSCGISCB/HSCG24-12-Q-PBFB25/listing.html)
Place of Performance: Address: 427 Commercial Street, Boston, Massachusetts, 02109, United States; Zip Code: 02109
Record: SN02660963-W 20120127/120125234649-5a140242a53ad207ae5b2f9ef891cd27 (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

72 -- STEEL RAISED ACCESS FLOORING