SOLICITATION NOTICE
47 -- Purchase and Delivery of Dredge Discharge Hose Assembly to be delivered to Fountain City, WI - Package #1
- Notice Date
- 1/25/2012
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 326220
— Rubber and Plastics Hoses and Belting Manufacturing
- Contracting Office
- Department of the Army, U.S. Army Corps of Engineers, USACE District, St. Paul, Attn: CEMVP-CT, 180 East Fifth Street, St. Paul, Minnesota, 55101-1678, United States
- ZIP Code
- 55101-1678
- Solicitation Number
- W912ES-12-T-0049
- Archive Date
- 2/16/2012
- Point of Contact
- Deborah A Lawrence, Phone: 651-290-5410, Christopher G. Dake, Phone: 6512905415
- E-Mail Address
-
deborah.a.lawrence@usace.army.mil, christopher.dake@us.army.mil
(deborah.a.lawrence@usace.army.mil, christopher.dake@us.army.mil)
- Small Business Set-Aside
- Service-Disabled Veteran-Owned Small Business
- Description
- W912ES-12-T-0049 SF1449 Solicitation/RFQ W912ES-12-T-0049 Combined Synopsis Solicitation SPECIFICATION FOR DREDGE HOSE Scope of work PR&C%20194854 Intended use The hose described herein will be used to conduct dredge slurry from the rigidly fixed dredge discharge pipe of the U.S. Army Corps of Engineers Dredge Goetz to the rigidly fixed pipe of a pontoon string. The hose is intended to provide all of the flexure necessary to connect a swinging hydraulic cutter dredge to a fixed discharge line supported on pontoons. The dredge discharge pipe has an internal diameter of 20 inches. Slurry The hose will carry a water and sand slurry consisting of 0 to 40% medium grain size sand. Line pressure The hose shall be capable of safely withstanding an operating pressure of 200 psi. The safety factor used by the manufacturer in the design of the hose to ensure safe operation at 200 psi shall be specified by the manufacturer. The hose will not be subject to a vacuum. Diameter The hose inside diameter shall be 20 inches. The diameter shall be measured at the inside of the lining. Length The length of the hose shall be 24 feet when measured from inlet flange to outlet flange. Flexure The hose shall be capable of flexing to accommodate 40 degrees of swing to the starboard of centerline and 40 degrees to the port of centerline by the dredge while the pontoon remains stationary. Hose flanges The manufacturer shall supply permanently affixed steel inlet and outlet flanges suitable for the use intended. The flanges shall be vulcanized to the hose. The recommended method of securing the hose flange to the mating flange shall be explained in the manufacturer's proposal. Hose tensile load Hose tensile load caused by the drag of the pontoon string will be less than 10,000 pounds. The majority of the tensile load will be carried by a pivoting hitch that connects the pontoons to the dredge. Lining The manufacturer shall supply a bonded rubber inner hose lining of one-inch thickness. The lining shall be continuous throughout the length of the hose, including the couplings and nipples, if used. Packaging and shipping The hose shall be packed in a manner suitable for transport and shipped FOB the Army Corps of Engineers, Fountain City Service Base, 431 North Shore Dr., Fountain City, WI 54629. Hose Specifications : Quantity 1 20" ID x 24' long 200psi operating pressure Build in steel reinforced flanges on both ends W/extra heavy build ups & extra internal end blocks Wire reinforced 1" thick black gum rubber tube Protective packing for hose protection Flanges : 20 Hole 25" BDC 27.25"O.D. 1 ¼" thick 1 1/16"Hole size Delivery: Please quote this project FOB Destination to Fountain City, WI. Technical point of contact: Keith Graham Facilities Manager US Army Corps of Engineers, St. Paul Dist 431 North Shore Drive Fountain City WI 54629 Hours of operation: 0700-1530 Monday-Friday Closed weekends and federal holidays Delivery Date: 01 March 2012. All quotes must be inclusive of all labor, materials, and freight. No additional costs will be remunerated after award.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/COE/DACA37/W912ES-12-T-0049/listing.html)
- Place of Performance
- Address: Dredge Geotz, U.S. Army Corps of Engineers, St. Paul District, 431 North Shore Drive, Fountain City, Wisconsin, 54629, United States
- Zip Code: 54629
- Zip Code: 54629
- Record
- SN02660779-W 20120127/120125234430-e265b7700a7c33a89fecfd83e7279113 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |