MODIFICATION
Z -- Spillway Gate Painting (6 Main Stem Dams)
- Notice Date
- 1/24/2012
- Notice Type
- Modification/Amendment
- NAICS
- 238320
— Painting and Wall Covering Contractors
- Contracting Office
- USACE District, Omaha, 1616 Capital Ave, Omaha, NE 68102-4901
- ZIP Code
- 68102-4901
- Solicitation Number
- W9128F12SC002
- Response Due
- 2/3/2012
- Archive Date
- 4/3/2012
- Point of Contact
- Rachelle Hairston, 402-995-2045
- E-Mail Address
-
USACE District, Omaha
(rachelle.e.hairston@usace.army.mil)
- Small Business Set-Aside
- N/A
- Description
- Sources Sought Spillway Gate Painting (6 Main Stem Dams): The Omaha District, US Army Corps of Engineers is seeking qualified members of the Small Businesses Community (Small Businesses (SB), Small Disabled Small Business (SDB), Woman Owned Small Businesses (WOSB), Service Disabled Veteran Owned SB (SDVOSB), Historically Underutilized Business Zone (HubZones), and Section 8(a) Participants) or small business-led teams, and small business joint ventures and Other than Small (OTS) concerns that qualify under the North American Industry Classification System (NAICS) Code 238320 - Painting and Wall Covering Contractors. There will be up to six (6) Best Value RFP Design-Build projects advertised through the Omaha District valued from approximately $2 to $7M. Work shall include spot painting OR completely repainting of steel gates at the six main stem dams on the Missouri River. The number, size and type of gates are as follows: Fort Peck, MT (16 - 40' x 25' vertical lift gates), Garrison, ND (28 - 40' x 29' tainter), Oahe, SD (8 - 50' x 23.5' tainter), Big Bend, SD (8 - 40' x 38' tainter), Fort Randall, SD (21 - 40' x 29' tainter) and Gavins Point, SD (14 - 40' x 30' tainter). Work shall include: blast surface of spillway gates to commercial blast, fill pits with weld material, prepare the final surface to SSPC 5 (white metal) and final coat the gates with a vinyl coating system with zinc primer. Work may require the use of scaffolding, snooper crane and harness access. In some cases Government barges may be provided to accommodate a work platform upstream of spillway gates. Contractor shall be responsible for dewatering, if required. Taking gates off-site is prohibited. Work may require torch cutting and grinding of new holes for drainage including a structural analysis for altering the gate. Experience in design/analysis of Hydraulic Steel Structures (HSS) may be required. Inspection of the structural integrity of the structural members of the gates, including the skin, will be required. Analysis and design of replacement members that have been damaged, or severely corroded, may be required. Each project office has one set of spillway stoplogs. Therefore, work shall be sequenced to be performed while the stoplogs are in place. The contractor shall have the option of fabricating temporary stoplog structures and/or working multiple shifts. Contractors shall have the following painting qualifications: QP-1 and QP-2 Contractor Certification - (NACE 1 and NACE 2 certifications can be substituted if contractor has at least 2 Corps of Engineers coating contracts with Satisfactory ratings that involve water tanks, hydraulic structures or bridges located over bodies of water in the last five years - contractor shall have a minimum of six each NACE 1 and NACE 2 certified personnel and one NACE 3 inspector) Coating contractor shall be required to hire an independent third party inspector NACE 3 or QP-3 qualified. In addition to painting, other work may include: sandblasting sections of the gate or the whole gate, lead-based paint removal over/near water, non-destructive testing, cathodic protection installation, wire rope replacement, welding, corrosion repair, concrete spall repair (the spalls that are directly below the gate when in the closed position that have to be repaired with the gate in the open position), gate seal replacement and concrete construction joint and/or waterstop replacement. This work may be subcontracted out to other specialty contractors, as required. Please note: other contractors may be performing work simultaneously in the same general vicinity of the gate work. Contractors will be required to coordinate with other contractors and dam personnel. This announcement is part of our market research, and your responses are sought to identify sources that have the knowledge, skills, and capability to perform the work. Interested contractors, including small businesses and small business-led teams that qualify under NAICS Code 238320 are hereby invited to submit a response to the market survey to demonstrate their technical, managerial and business capability to provide the requested services. THIS SOURCES SOUGHT NOTICE DOES NOT CONSTITUTE A REQUEST FOR A FORMAL PROPOSAL. This notice is provided as information to the marketplace and is an invitation for an expression of interest and demonstration of small business capability to perform the anticipated work. The Government will not pay for the provision of any information, nor will it compensate any respondents for the development of such information. All interested, capable, qualified and responsive contractors are encouraged to reply to this market survey request. Interested Contractors must furnish the following information by 03 February 2012, 2:00PM Central Time: General Information: 1. What is your company name, address, point of contact, phone number, and e-mail address? 2. What is your company CAGE code and DUNS number? 3. What is your business size in relation to the NAICS Code 238320? 4. What is your geographic span? 5. What is your bonding capability? Include individual contract and aggregate limits. Past Performance Information (please limit this to 10 pages excluding certificates): 6. Please provide project information and past performance for up to five (5) past projects completed in the past five (5) years that clearly demonstrates familiarity and experience on projects with similar scopes as described above. For each project, include the following information: a. Size, duration, and complexity of job; b. Information on your role as either a prime contractor or subcontractor; c. Point of contact (POC) at the agency or prime contractor's organization to verify contract information, including name, address, e-mail address, telephone number, and information on the specific tasks you performed on the project. d. Overall past performance rating for each project. 7. Please provide a brief description of your experience either managing a team or acting as a member of a team of businesses working on large, complex projects. Provide POCs (name, address, e-mail address, and telephone number) that can verify this experience. 8. Please provide certificates of personnel that have the following painting qualifications: a. QP-1 Contractor Certification b. QP-2 Contractor Certification - (NACE 1 and NACE 2 certifications can be substituted for QP-1 and QP-2 if contractor submits at least 2 Corps of Engineers coating contracts with Satisfactory ratings that involve water tanks, hydraulic structures or bridges located over bodies of water in the last five years - contractor shall have a minimum of six each NACE 1 and NACE 2 certified personnel and one NACE 3 inspector) c. Independent, third party NACE 3 or QP-3 inspector. Electronic responses should be sent to rachelle.e.hairston@usace.army.mil. Primary POC for this Sources Sought announcement is MSG Hairston, Rachelle (402)995-2045, e-mail: rachelle.e.hairston@usace.army.mil. Secondary POC is Polina Poluektova, (402)995-2091, e-mail: polina.a.poluektova@usace.army.mil. Technical POC is Trish Lambert, (402)995-2032, e-mail: Patricia.E.Lambert@usace.army.mil.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/COE/DACA45/W9128F12SC002/listing.html)
- Place of Performance
- Address: USACE District, Omaha 1616 Capital Ave, Omaha NE
- Zip Code: 68102-4901
- Zip Code: 68102-4901
- Record
- SN02659730-W 20120126/120124234127-3f5a6baee1bf3a74711ca2c071b26d80 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |