SOLICITATION NOTICE
10 -- STEEL LOCK ACCELERATOR STOP
- Notice Date
- 12/15/2011
- Notice Type
- Presolicitation
- NAICS
- 332994
— Small Arms Manufacturing
- Contracting Office
- Defense Logistics Agency, DLA Acquisition Locations, DLA Land and Maritime, P O Box 3990, Columbus, Ohio, 43218-3990, United States
- ZIP Code
- 43218-3990
- Solicitation Number
- SPM7L412R0004
- Archive Date
- 2/17/2012
- Point of Contact
- Michele Beasley, Phone: 6146927572
- E-Mail Address
-
michele.beasley@dla.mil
(michele.beasley@dla.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- NSN# 1005-00-716-1300 QTY: 4129 W/100% OPTION OPEN/CLOSE 1/3/2012 - 2/2/2012 ITEM DESCRIPTION FOR PR: 0043281971 LOCK, ACCELERATOR STOP. STEEL. ************************************************** ENGINEERING EXCEPTIONS: The Following Engineering Exceptions Apply To This Procurement Action(s): QA THE CONTRACTOR SHALL USE MIL-STD-1916, DOD PREFERED METHODS OF ACCEPTANCE OF PRODUCT. THE VERIFICATION LEVEL (VL) SHALL BE VL III IN LIEU OF AQL OF.65, FOR MAJOR CHARACTERISTICS AND VL II IN LIEU OF AQL 1.5 AND IN LIEU OF AQL OF 2.5 FORMINOR CHARACTERISTICS. -------------------------------------------------- TDPL: Document Delete Substitute Add QAP 7161300 (shts 1&2) X - - ************************************************** THIS ITEM IS A "DEFENSE ARTICLE" AS DEFINED IN AND SUBJECT TO THE INTERNATIONAL TRAFFIC IN ARMS REGULATIONS (22 C.F.R. 120-30) AND THE ARMS EXPORT CONTROL ACT (22 U.S.C.A. 2778-2779). ANY MANUFACTURER OR EXPORTER OF DEFENSE ARTICLES IS REQUIRED TO REGISTER WITH THE DIRECTORATE OF DEFENSE TRADE CONTROLS (DDTC), DEPARTMENT OF STATE. DOCUMENTARY EVIDENCE OF REGISTRATION MAY BE REQUIRED PRIOR TO AWARD. ADDITIONAL EXPORT RESTRICTIONS APPLY AS INDICATED HEREIN. FAILURE TO SUBMIT DIRECTORATE OF DEFENSE TRADE CONTROLS (DDTC) REGISTRATION WHEN REQUESTED WILL RESULT IN WITHDRAWAL OF QUOTES/OFFERS. IF REQUIRED BY CONTRACT, CONTRACTOR FIRST ARTICLE TEST MAY APPLY. A CHECKLIST THAT DETAILS PHOSPHATE COATING REQUIREMENTS EXIST FOR THIS MATERIAL. RELATED DRAWINGS INDICATE THIS CONTRACT IS FOR M2 MACHINE GUN MATERIAL. ENSURE CONTRACTOR AND ANY SUB VENDORS ARE AWARE THAT ONLY MANGANESE PHOSPHATE COATING PER MIL-DTL-16232 IS ACCEPTABLE. THIS ITEM HAS BEEN IDENTIFIED AS A M-2 KIT COMPONENT PART. PRODUCT VERIFICATION TESTING WILL BE INVOKED, UNLESS APPROVED FOR WAIVER ON PREVIOUS CONTRACTS. PROCESS PROCEDURES AND OR WORKMANSHIP SPECIMENS REQUIRED BY MILITARY SPECIFICATION (S) APPLICABLE TO THIS CONTRACT WILL BE APPROVED BY THE CONTRACT PCO. POSTAWARD PREPRODUCTION APPROVAL VERIFYING THE REQUIREMENTS OF MIL-DTL-16232 IS REQUIRED. THIS ITEM HAS TECHNICAL DATA THAT IS SUBJECT TO EXPORT CONTROL REGULATIONS, OR THE ITEM HAS NO TECHNICAL DATA BUT IT IS LISTED ON THE UNITED STATES MUNITIONS LIST (USML) OR THE COMMERCE CONTROL LIST (CCL), AND IT IS THEREFORE CONTROLLED FOR EXPORT BY THE INTERNATIONAL TRAFFIC IN ARMS REGULATION (ITAR) OR EXPORT ADMINISTRATION REGULATION (EAR). (SEE DFARS CLAUSE 252.204-7008.) DISTRIBUTION OF THE TECHNICAL DATA AND ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGH JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OF STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO INTERNATIONAL AGREEMENTS. TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, "MILITARY CRITICAL TECHNICAL DATA AGREEMENT," FORM IS AVAILABLE AT THE WORLD WIDE WEB ADDRESS: HTTP://WWW.LOGISTICSINFORMATIONSERVICE.DLA.MIL/J CP/, OR BY WRITING TO: UNITED STATES/CANADA JOINT CERTIFICATION OFFICE DLA LOGISTICS INFORMATION SERVICE FEDERAL CENTER 74 WASHINGTON AVE., NORTH BATTLE CREEK, MI 49017-3084 TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT, DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 "EXEMPTIONS OF GENERAL APPLICABILITY," AND/OR EAR PART 740 ARE APPLICABLE. NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL DATA ARE REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN APPLICABLE AGREEMENT OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO RECEIVE A COPY OF THE EXPORT CONTROLLED TECHNICAL DATA. NOTE: SUPPLIERS ARE REQUIRED TO IDENTIFY SUB-CONTRACTORS AT TIME OF QUOTING IF KNOWN. USE OF ANY SUB-CONTRACTOR SUPPLIER WILL REQUIRE JCP CERTIFICATION APPROVAL. THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST MEET QPL/QML SPECIFICATIONS.BY SUBMITTING AN OFFER, THE OFFEROR AGREES TO PROVIDE QPL/QML COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE APPLICABLE QPL(S)/QML(S). THE INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO) 9002 OR A "TAILORED" PROGRAM MEETING THE FOLLOWING ISO 9002 PARAGRAPHS APPLIES: 4.5, DOCUMENT CONTROL: LIMITED TO INSPECTION AND TESTING AS WELL AS APPLICABLE DRAWINGS, SPECIFICATIONS AND INSTRUCTIONS REQUIRED BY CONTRACT 4.6, PURCHASING: 4.6.1 AND LIMITED TO 4.6.2 A) AND 4.6.4.2, ALL OTHER PARTS OF PARAGRAPH ARE HEREBY DELETED 4.7, CUSTOMER-SUPPLIED PRODUCT: 4.8, PRODUCT IDENTIFICATION & TRACEABILITY: 4.10, INSPECTION & TESTING: 4.11, INSPECTION, MEASURING & TEST EQUIPMENT: 4.12, INSPECTION AND TEST STATUS: 4.13, CONTROL OF NONCONFORMING PRODUCT: 4.14, CORRECTIVE AND PREVENTIVE ACTION: PARAGRAPH 4.14.3 APPLY TO PRODUCT ONLY 4.16, QUALITY RECORDS: FAR CLAUSE 52.246-11 APPLIES IF AQLS ARE LISTED IN THE SPECIFICATION(S) OR DRAWING(S) THEY MAY BE USED TO ESTABLISH THE AUTHORIZED SAMPLE SIZE,HOWEVER,THE ACCEPTANCE NUMBER FOR THIS CONTRACT IS ZERO;I.E.,THIS CONTRACT REQUIRES A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS AND REJECTS ON ONE OR MORE DEFECT(S). CERTIFICATE OF QUALITY COMPLIANCE IS MANDATORY. HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS MIL-I-45208 INSPECTION SYSTEM APPLIES. CERTIFICATE OF QUALITY COMPLIANCE APPLIES - DLAR 52.246-9000. DLAD CLAUSE 52.246-9004, PRODUCT VERIFICATION TESTING IS HEREBY INCORPORATED, AND MAY BE INVOKED AT THE DISCRETION OF THE PROCUREMENT ACTIVITY.. CONTRACTOR/MANUFACTURER IS REQUIRED TO ESTABLISH AND MAINTAIN A CALIBRATION SYSTEM THAT MEETS THE REQUIREMENTS OF ANSI/NCSL Z540-1-1994, AMERICAN NATIONAL STANDARD FOR CALIBRATION - CALIBRATION LABORATORIES AND MEASURING AND TEST EQUIPMENT - GENERAL REQUIREMENTS, OR ISO 10012-1, QUALITY ASSURANCE REQUIREMENTS FOR MEASURING EQUIPMENT- PART 1, METROLOGICAL CONFIRMATION SYSTEM FOR MEASURING EQUIPMENT. MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO,OR COME IN DIRECT CONTACT WITH,ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. CRITICAL APPLICATION ITEM I/A/W QAP 16236 PHOS-DL-MANG REFNO AMEND NR DTD 11/05/10 TYPE NUMBER I/A/W QAP 16236 PHOS-OUTLINE-16232 REFNO AMEND NR A DTD 10/15/10 TYPE NUMBER I/A/W QAP 16236 PHOS-QAR-CHECK REFNO AMEND NR A DTD 10/15/10 TYPE NUMBER I/A/W DRAWING NR 19200 12579607 REFNO AMEND NR C DTD 08/04/09 TYPE NUMBER I/A/W DRAWING NR 19200 12993884 REFNO AMEND NR D DTD 03/20/11 TYPE NUMBER I/A/W DRAWING NR 19200 7161300 BASIC AMEND NR M DTD 06/24/10 TYPE NUMBER I/A/W QAP 19200 7161300 REFNO AMEND NR E DTD 12/03/79 TYPE NUMBER I/A/W DRAWING NR 19200 7161300 REFNO AMEND NR DTD 01/20/11 TYPE NUMBER I/A/W DRAWING NR 19200 7161300 REFNO AMEND NR M DTD 06/24/10 TYPE NUMBER I/A/W DRAWING NR 19200 L05S3084 REFNO AMEND NR DTD 01/30/09 TYPE NUMBER I/A/W DRAWING NR 19200 L8Q2006 REFNO AMEND NR G DTD 02/04/99 TYPE NUMBER I/A/W SPEC NR MIL-DTL-16232G REFNO AMEND NR G DTD 10/03/06 TYPE NUMBER I/A/W SPEC NR MIL-PRF-16173E(I1) REFNO AMEND NR 1 DTD 12/11/06 TYPE NUMBER I/A/W SPEC NR MIL-PRF-3150E REFNO AMEND NR 2 DTD 10/02/06 TYPE NUMBER I/A/W SPEC NR MIL-W-13855D(5) NOT 3 REFNO AMEND NR 5 DTD 10/02/06 TYPE NUMBER I/A/W SPEC NR QPL-16173-84 NOT 1 REFNO AMEND NR 84 DTD 10/03/06 TYPE NUMBER I/A/W SPEC NR QPL-3150-34 NOT 1 REFNO AMEND NR 34 DTD 10/03/06 TYPE NUMBER
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DSCC/SPM7L412R0004/listing.html)
- Record
- SN02640188-W 20111217/111215234727-2b471fd32f35884c2ab683165910b840 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |