SOLICITATION NOTICE
84 -- Diver wetsuits and accessories
- Notice Date
- 12/14/2011
- Notice Type
- Combined Synopsis/Solicitation
- Contracting Office
- 84 Grayling Avenue, Groton, CT 06349
- ZIP Code
- 06349
- Solicitation Number
- N00189-12-T-G019
- Response Due
- 12/27/2011
- Archive Date
- 6/24/2012
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, in conjunction with FAR 13.5, as applicable, and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued.The solicitation number is N00189-12-T-G019 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-54. The associated North American Industrial Classification System (NAICS) code for this procurement is 315228 with a small business size standard of 500.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2011-12-27 11:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Groton, CT 06349 The USN NAVSUP FLC Norfolk requires the following items, Brand Name or Equal, to the following: LI 001, MEN'S 8-7-6-5MM HOODED FULLSUIT-Vented hood with a contoured chin, low friction face seal and bar tacks that is integrated to the suit with a horizontal front zipper-2- 9x9?? bellows pockets with Velcro flap located on the side of each leg between the knee and hip-2- q-lite pockets located on the underside of the forearm on each sleeve-All seams secured with a multi glue or pressure bonded heat sealing technique along with a stitching method that does not fully penetrate the neoprene-Pre bent elbows MANUFACTURER: XCEL INTERNATIONAL INC.DRYSUIT PART NUMBER: MB8765H2TOTAL QUANTITY: 40Sizes needed:1-S, 1-ST, 2-M, 1-MT, 4-ML, 2-MLS, 8-L, 2-LS, 2-LT, 9-XL, 1-XLS, 1-XLT, 5-2XL, 1-2XLS POCKET INFORMATION:BELLOWS POCKET: MANUFACTURER: XCEL INTERNATIONAL INC.PART NUMBER: DAM0832TOTAL QUANTITY: 80 Q-LITE POCKET MODIFICATIONS:MANUFACTURER: XCEL INTERNATIONAL INC.PART NUMBER: DAM0814TOTAL QUANTITY: 80, 40, LOT; LI 002, MEN'S 7-6MM WETSUIT -Semi dry back zipper with an adjustable collar seal-Protective spine pad-Drylock wrist seals-Ankle zipper system with ankle dams-Thermobamboo heat retaining lining for the interior lining of the suit-2- 9x9?? bellows pockets with Velcro flap located on the side of each leg between the knee and hip-2- q-lite pockets located on the underside of the forearm on each sleeve-All seams secured with a multi glue or pressure bonded heat sealing technique along with a stitching method that does not fully penetrate the neoprene-Pre bent elbows TOTAL QUANTITY: 40Sizes needed:1-S, 1-ST, 2-M, 1-MT, 4-ML, 2-MLS, 8-L, 2-LS, 2-LT, 9-XL, 1-XLS, 1-XLT, 5-2XL, 1-2XLSMANUFACTURER: XCEL INTERNATIONAL INC.PART NUMBER: MB076529 POCKET INFORMATION:BELLOWS POCKET: MANUFACTURER: XCEL INTERNATIONAL INC.PART NUMBER: DAM0832TOTAL QUANTITY: 80 Q-LITE POCKET MODIFICATIONS:MANUFACTURER: XCEL INTERNATIONAL INC.PART NUMBER: DAM0814TOTAL QUANTITY: 80, 40, LOT; LI 003, MEN'S 5-4MM WETSUIT -back zipper with an adjustable collar seal-Ankle zipper system-Thermobamboo heat retaining lining for the interior lining of the suit-2- 9x9?? bellows pockets with Velcro flap located on the side of each leg between the knee and hip-2- q-lite pockets located on the underside of the forearm on each sleeve-All seams secured with a multi glue or pressure bonded heat sealing technique along with a stitching method that does not fully penetrate the neoprene-Pre bent elbows MANUFACTURER: XCEL INTERNATIONAL INC.PART NUMBER: MB54XAU1TOTAL QUANTITY: 40 Sizes needed: 1-S, 1-ST, 2-M, 1-MT, 4-ML, 2-MLS, 8-L, 2-LS, 2-LT, 9-XL, 1-XLS, 1-XLT, 5-2XL, 1-2XLS POCKET INFORMATION:BELLOWS POCKET: MANUFACTURER: XCEL INTERNATIONAL INC.PART NUMBER: DAM0832TOTAL QUANTITY: 80 Q-LITE POCKET MODIFICATIONS:MANUFACTURER: XCEL INTERNATIONAL INC.PART NUMBER: DAM0814TOTAL QUANTITY: 80, 40, LOT; LI 004, MENS 1.5-1-.5MM XPEDITION WETSUIT -Pre bent elbows-Thumb loops and foot stirrups-Front zip with an adjustable collar seal-Constructed from super stretch neoprene MANUFACTURER: XCEL INTERNATIONAL INC.PART NUMBER: MBX001329TOTAL QUANTITY: 40 Sizes needed: 1-S, 1-ST, 2-M, 1-MT, 4-ML, 2-MLS, 8-L, 2-LS,2-LT, 9-XL, 1-XLS, 1-XLT, 5-2XL, 1-2XLS, 40, EA; LI 005, 4-3MM HOODED VEST -Vented hood with a contoured chin, low friction face seal and bar tacks that is integrated to the suit with a horizontal front zipper-All seams secured with a multi glue or pressure bonded heat sealing technique along with a stitching method that does not fully penetrate the neoprene-Thermobamboo heat retaining lining for the interior lining MANUFACTURER: XCEL INTERNATIONAL INC.PART NUMBER: MB4386U9TOTAL QUANTITY: 40 Sizes needed:5-M, 25-L, 10-XL, 40, EA; LI 006, 3-2MM THERMOBAMBOO DIVING GLOVES -All seams secured with a multi glue or pressure bonded heat sealing technique along with a stitching method that does not fully penetrate the neoprene-Pre bent, flexible palms-Thermobamboo heat retaining lining for the interior lining-Kevlar or titanium lining on the exterior of the palms and fingers MANUFACTURER: XCEL INTERNATIONAL INC.PART NUMBER: AB329381TOTAL QUANTITY: 75 Sizes needed:10-M, 55-L, 10-XL, 75, EA; LI 007, 5-4MM THERMOBAMBOO DIVING GLOVES -All seams secured with a multi glue or pressure bonded heat sealing technique along with a stitching method that does not fully penetrate the neoprene-Pre bent, flexible palms-Thermobamboo heat retaining lining for the interior lining-Kevlar or titanium lining on the exterior of the palms and fingers MANUFACTURER: XCEL INTERNATIONAL INC.PART NUMBER: AB549382TOTAL QUANTITY: 75 Sizes needed:10-M, 55-L, 10-XL, 75, EA; LI 008, 7-6MM DRYLOCK ROUND TOE BOOT -All seams secured with a multi glue or pressure bonded heat sealing technique along with a stitching method that does not fully penetrate the neoprene-Thermocarbon heat retaining lining.-Drylock ankle seals-Reinforced heals and toes MANUFACTURER: XCEL INTERNATIONAL INC.PART NUMBER: ABV79811TOTAL QUANTITY: 43 Sizes needed:Size 10- 10Size 11- 20Size 12- 10Size 13- 3, 43, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, USN NAVSUP FLC Norfolk intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. USN NAVSUP FLC Norfolk is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. The NAICS code is 315228 and the Small Business Standard is 500. FAR 52.247-34, F.o.b. Destination applies 52.211-6 Brand Name or Equal 52.212-2 Evaluation - Commercial Items. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. No partial shipments are permitted unless specifically authorized at the time of award. Bid MUST be good for 30 calendar days after close of Buy. FAR 52.212-3 Offeror Reps and Certs / FAR 52.212-3 Alt1 Offeror Reps and Certs. EFFECTIVE JAN 2005, all offerors are required to use ?Online Representations and Certifications Application (ORCA) to respond to federal solicitations. To register in ORCA, please go to www.bpn.gov/orca. You must be active in the Central Contractor Registration (www.ccr.gov) and have a Marketing Partner Identification Number (MPIN), to register in ORCA. Failure to register in ORCA may preclude an award being made to your company. Central Contractor Registration (CCR). Sellers must be registered in the CCR database to be considered for award. Registration is free and can be completed on-line at http://www.ccr.gov/ The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/Far/ 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders?Commercial Items. 52.204-10 Reporting Subcontract Awards. 52.219-6 Notice of Total Small Business Set-Aside. 52.219-28 Post-Award Small Business Program Rerepresentation. 52.222-3 Convict Labor 52.222-19 Child Labor--Cooperation with Authorities and Remedies 52.222-21 Prohibition of Segregated Facilities 52.222-26 Equal Opportunity 52.222-35 Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans 52.222-36 Affirmative Action for Workers w/ Disabilities 52.222-37 Employment Reports on Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans. 52.223-18 Contractor Policy to Ban Text Messaging while Driving (SEPT 2010) 52.225-13 Restrictions on Certain Foreign Purchases. 52.232-18 Availability of Funds 252.211-7003 Item Identification & Valuation (AUG 2008) 252.212-7001 Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items. (MAR 2011) 252.225-7001 Buy American Act and Balance of Payments Program. 252.247-7023 Transportation of Supplies by Sea (MAY 2002) 252.247-7023 (iv) Alt III - ALTERNATE III (MAY 2002) 252.247-7023.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DON/NAVSUP/N00189/N00189-12-T-G019/listing.html)
- Place of Performance
- Address: Groton, CT 06349
- Zip Code: 06349
- Zip Code: 06349
- Record
- SN02639283-W 20111216/111214234537-0badf4c401b9d979bdb3433ded47e08a (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |