SOURCES SOUGHT
99 -- Fabricate and Test Melter Bubblers
- Notice Date
- 12/8/2011
- Notice Type
- Sources Sought
- NAICS
- 332999
— All Other Miscellaneous Fabricated Metal Product Manufacturing
- Contracting Office
- Department of Energy, Bechtel National, Inc. (DOE Contractor), Bechtel National Inc., 2435 Stevens Center Place, Richland, Washington, 99352
- ZIP Code
- 99352
- Solicitation Number
- 24590-CM-MRA-MEEM-00006
- Point of Contact
- Winifred Renz, Phone: 5093712338
- E-Mail Address
-
werenz@bechtel.com
(werenz@bechtel.com)
- Small Business Set-Aside
- N/A
- Description
- Request for Interest Form LAW Melter Startup & Cold Commisioning Bubblers & Parts Document Number: 24590-CM-MRA-MEEM-00006 Important to Safety? No Quality Level: Commercial Quality Surveillance: Level 3 - Full Scope Inspection Commodity Code: MEEM NAICS Code: 332999 https://eweb1.sba.gov/naics/dsp_naicssearch2.cfm Submit Interest By: July 6, 2012 PROJECT DESCRIPTION AND LOCATION The Hanford Tank Waste Treatment and Immobilization Plant (WTP) is a complex of radioactive waste treatment processing facilities designed and constructed by Bechtel for the Department of Energy (DOE). The facility will process the Hanford Site tank waste and put the waste into a stable glass form. The processed waste will be shipped to other sites for depository. The Project site is located at 200 East Area of the Hanford Site near Richland, Washington, along the Columbia River. The site elevation varies from 662 to 684 feet above mean sea level. Sand and silt exist as surface materials. Ambient temperature is (-) 23 degrees F minimum to 113 degrees F maximum, with relative humidity of 5% minimum to 100% maximum. The project design life is 40 years. SCOPE OF WORK Procure Material, Fabricate and Test 36 LAW Melter Bubblers and 72 LAW Melter Bubbler replacement Legs (Note: Inconel MA758 material to be supplied by BNI as GFE) EQUIPMENT AND MATERIALS REQUIRED Inconel, Platinum, Stainless Steel, and Carbon Steel Metal Fabrication Equipment including Lathes/Mills capable of machining 20" Sch. 140 C.S. pipe, gun-drilling/boring a 0.6" ID into Inconel MA758 1.5" dia x 40" lg round bar, milling small diameter ovals, bosses, counter sinks, etc., welding machines appropriate for Carbon Steel, Inconel 6690 & MA758 metals, casting castable refractories and drying 18" dia cylinders with penetrations, NDE equipment, Pneumatic high pressure (4500 psig) and low pressure (5 psig) leak check testing equipment, meg-ohm testing equipment, white metal blasting and bead cleaning equipment, spray booth and spray painting equipment. CODES Fabricating metals to aws D1.1, D1.6, ASME B31.3, & ASME B&PVc STANDARDS Casting and inspecting refractories IAW API STd-936, ASTM A-380 cleaning stainless and nickel alloys, asnt snt-tc-1a nde certifications, and sspc-sp no. 10 nace no.2 surface preparation. QA REQUIREMENTS Potential bidders should provide, in electronic format, some documentation that describes their company's Quality Assurance program. A summary, or table of contents of the program, similar evidence will be satisfactory. The information is to be uploaded directly into Bechtel's Supplier Database: https://supplier.bechtel.com T he successful bidder must be registered with Bechtel and shall have and maintain a documented quality assurance program that complies with the applicable WTP requirements including, but not limited to, 10 CFR 830, DOE Order 414.1, ASME NQA-1. The bidder's Quality Assurance Program must meet the specific requirements of the Material Requisition. The bidder must have the ability to demonstrate satisfactory implementation of their Quality Assurance Program to be considered for an award. In order to expedite the qualification process, potential bidders are encouraged to provide a controlled copy of their Quality Assurance Program (include the "Package Ref." - Document Number) to the Buyer/Contact noted below, if controlled copy was not previously submitted and evaluated by BNI Supplier Qualification. The preferred method is to submit in electronic format via e-mail to: mdonnels@bechtel.com -or- Hard copies (include the "Package Ref." - Document Number) may be submitted to: Bechtel National, Incorporated Attn: Maggie Donnelson MS 12-2A 2435 Stevens Center Place Richland, WA 99354 COMMERCIAL\TECHNICAL REQUIREMENTS Bechtel Procurement is responsible for collection, evaluation, and internal publication of Supplier/Subcontractor information through our project's pre-qualification program. In addition to the information requested above, Bechtel requires you to register your company at the Supplier and Contractor Portal at: https://supplier.bechtel.com Prior to being considered on any Bidders List you must go to the Qualification Process on this web site (https://www.hanfordvitplant.com) to complete the required forms for this opportunity. All information provided shall be strictly confidential. QUESTIONNAIRE Potential offeror shall submit their interest in this opportunity via e-mail using the " Submit Interest " link provided on the Two Year Forecast Report, which provides an outlined email including, but not limited to the bulleted items below, and is appropriately addressed to our central mailbox and to the buyer. Each interest email should include: •§ Dun and Bradstreet #: •§ Company Name: •§ Company Address: •§ Contact Phone #: •§ Contact Fax #: •§ Contact Person: •§ E-mail Address: CONTACT Bechtel National, Inc. 2435 Stevens Center Place Richland, WA 99354 Attn : Maggie Donnelson Mailstop: MS12-2A Email: mdonnels@bechtel.com
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOE/BNI/BNI/24590-CM-MRA-MEEM-00006/listing.html)
- Record
- SN02636103-W 20111210/111208234522-e278e6bdf48f5cd7ac2f1eddf1a742ca (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |