MODIFICATION
63 -- Thermal Imaging Camera
- Notice Date
- 9/21/2011
- Notice Type
- Modification/Amendment
- Contracting Office
- BLDG 1407, White Sands Missile Range, NM 88002
- ZIP Code
- 88002
- Solicitation Number
- W9124Q-Thermo-Camera
- Response Due
- 9/22/2011
- Archive Date
- 3/20/2012
- Point of Contact
- Name: Client Services, Title: Sourcing Agent, Phone: 1.877.9FEDBID, Fax: 703.442.7822
- E-Mail Address
-
clientservices@fedbid.com;
- Small Business Set-Aside
- N/A
- Description
- AMENDMENT NOTICE:This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, in conjunction with FAR 13.5, as applicable, and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued.The solicitation number is W9124Q-Thermo-Camera and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-53. The associated North American Industrial Classification System (NAICS) code for this procurement is 333314 with a small business size standard of 500.00 employees.This requirement is unrestricted and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2011-09-22 17:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be White Sands Missile Range, NM 88002 The U.S. Army ACC MICC White Sands Missile Range requires the following items, Brand Name or Equal, to the following: LI 001, Thermal Imaging Camera System needed to support the warfighter. The following minimal specifications must be:a) Spectral range must be 3.5um - 5.0umb) Detector resolution must be 640 x 480 pixelsc) Detector type must be a cooled InSb detectord) Lens type must have continuous optical zoom and continuous digital zoome) Field of View (FOV) must have 1.1 deg(H) x 0.84 deg(V) to 14.01 deg(H) x 10.50 deg(V) f) Image presentation must be NTSC/PAL selectableg) Focus must have automatic and manual focus with electable preset focus distanceh) Image processing must have Digital Detail Enhancement (DDE) with histogram equalizationi) Remote control interface must be abel to be controlled by TCP/IP ethernetj) Camera must have environmental enclosure and be able to operate in temperatures ranging from -32 to +55 degrees Celsius. k) Must have automatic window defrost with automatic front lens when parkedl) Power requirements must be 18- 35 V DCm) Weight must be 9.5 kg, 475mm x 235mm x 194mm (LxWxH)n) Command and Control must have GUI software to control camera remotely over TCP/IPo) Must have built-in test BIT Brand Name or Equal to: ThermoVision Ranger HRC-S Imager System, 2, EA; LI 002, SYSTEM CABLE a) Must be 7.5m b) Must be compatible with Thermal Imaging Camera System Brand Name or Equal to: System Cable Ranger HRC, 2, EA; LI 003, OUTDOOR POWER SUPPLY a) Must be 18-35 VDCb) Must be compatible with Thermal Imaging Camera System Brand Name or Equal to: Outdoor Power Supply Ranger HRC, 2, EA; LI 004, REMOTE CONTROL a) Must be 2mb) Must be compatible with Thermal Imaging Camera System Brand Name or Equal to: Remote Control Ranger HRC, 2, EA; LI 005, OUTDOOR POWER CABLE a) Must be 15mb) Must be compatible with Thermal Imaging Camera System Brand Name or Equal to: Outdoor Power Cable Ranger HRC Imager, 2, EA; LI 006, BREAKOUT BOX a) Must be able to break out video, remote control, and power supply from main camera cableb) Must be compatible with Thermal Imaging Camera System Brand Name or Equal to: Breaker Box Ranger HRC, 2, EA; LI 007, Shipping, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, U.S. Army ACC MICC White Sands Missile Range intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. U.S. Army ACC MICC White Sands Missile Range is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. Offeror must be registered in the Central Contractor Registration (CCR) database before an award can be made to them. If the offeror is not registered in the CCR, it may do so through the CCR website at http://www.ccr.gov. Delivery must be 30 days preferred after receipt of order (ARO). The offeror must provide within its offer the number of days required to make delivery after it receives a purchase order from the buyer. No partial shipments are permitted unless specifically authorized at the time of award. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.211-6, Brand Name or Equal; FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.252-2, Clauses Incorporated by Reference; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, the following clauses in paragraph (a) and the following clauses in paragraph (b): 52.203-6, 52.204-10, 52.209-6, 52.219-4, 52.219-8, 52.219-28, 52.222-3, 52.222-19, 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.222-40, 52.222-54, 52.223-18, 52.225-3, 52.225-13, 52.232-33, 52.222-50. The full text of the referenced FAR clauses may be accessed electronically at http://farsite.hill.af.mil. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: DFARS 252.203-7002 Requirement to Inform Employees of Whitleblower Rights; DFARS 252.204-7004 Alt A, Central Contractor Registration; DFARS 252.204-7008 Export-Controlled Items; DFARS 252.211-7003, Item Identification and Valuation; DFARS 252.232-7010, Levies on Contract Payments; DFARS 252.212-7001, Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items, paragraph (a) and the following clauses in paragraph (b): 252.203-7000, 252.225-7001, 252.225-7008, 252.225-7009, 252.225-7012, 252.225-7036, 252.232-7003, 252.243-7002, 252.247-7023. The full text of the referenced FAR clauses may be accessed electronically at http://farsite.hill.af.mil. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: AFARS 5152.209-4000, DOD Level I Antiterrorism (AT) Standards. The full text of the referenced FAR clauses may be accessed electronically at http://farsite.hill.af.mil.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/75790b9ddbd4e024ec820ba06c2c6b9f)
- Place of Performance
- Address: White Sands Missile Range, NM 88002
- Zip Code: 88002
- Zip Code: 88002
- Record
- SN02587450-W 20110923/110922001511-75790b9ddbd4e024ec820ba06c2c6b9f (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |