PRESOL | 81 | Furnishing all equipment, materials, and labor to move approximately 300,000 books and selected equipment from the areas in Building 1405 into Building 833 at Gunter Annex, Maxwell AFB.

FBO DAILY ISSUE OF SEPTEMBER 23, 2011 FBO #3590
SOLICITATION NOTICE

81 -- Furnishing all equipment, materials, and labor to move approximately 300,000 books and selected equipment from the areas in Building 1405 into Building 833 at Gunter Annex, Maxwell AFB.

Notice Date: 9/21/2011
Notice Type: Combined Synopsis/Solicitation
NAICS: 484210 — Used Household and Office Goods Moving
Contracting Office: Department of the Air Force, Air Education and Training Command, Maxwell AFB Contracting Squadron, 50 LeMay Plaza South, Bldg 804, Maxwell AFB, Alabama, 36112-6334
ZIP Code: 36112-6334
Solicitation Number: F2XHE21264A001
Archive Date: 10/12/2011
Point of Contact: Eldrae A. Perdue, Phone: 334-953-2443, Edwin Byrd, Phone: (334) 953-3525
E-Mail Address: eldrae.perdue@maxwell.af.mil, edwin.byrd@maxwell.af.mil
(eldrae.perdue@maxwell.af.mil, edwin.byrd@maxwell.af.mil)
Small Business Set-Aside: Total Small Business
Description: GENERAL INFORMATION The 42nd Contracting Squadron, 50 LeMay Plaza, Bldg 804, Maxwell AFB, AL has a requirement to purchase items as described in this document. This is a streamlined combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6 as supplemented with additional information included in this notice. This announcement constitutes the only notice. A HARD COPY OF THIS REQUEST FOR QUOTE (RFQ) WILL NOT BE ISSUED. The solicitation will be issued electronically via email. Paper copies of this solicitation will not be made available. No other notifications will be sent. This requirement is issued as a Request for Quote (RFQ), reference number F2XHE21264A001 / F2XHE21264A002.. The solicitation document and incorporated provisions and clauses in effect, the Federal Acquisition Regulation (FAR) Federal Acquisition Circular 2005-53 (4 Aug 2011), and the Defense Federal Acquisition Regulation Supplement (DFARS) DPN #20110819 (Effective 19 Aug 2011). A Firm Fixed Priced Award will be made in accordance with the following: NAICS Code: 484210; size standard: $25.5M The Defense Priorities and Allocations System rating is S10. NATURE OF ACQUISITON: ADAL AIR UNIVERSITY LIBRARY has a requirement to provide all materials, equipement and labor to move approximately 300,000 books and selected equipement from the areas designated as HVAC Phase 1 of the subject project in Building 1405 into Building 833 at Gunter Annex, Maxwell AFB, AL. Movement of sixteen (16) SAASS faculty offices and books to include 6,000 books from building 1405 and relocating and unpacking books and items into the swing space offices prepared in Building 1403, Maxwell AFB. A site visits is scheduled for 26 Sep 11, 10:00 a.m CST. ALL QUOTES ARE DUE ON 27 SEPTEMBER 2011, NLT 2:00 p.m CST. IMPORTANT NOTE: GENERAL SERVICES ADMINISTRATION (GSA) QUOTES WILL NOT BE CONSIDERED. This acquisition is for the purchase of the following items: CLIN 0001-AA: Temporary shelving in Building 833, Gunter Annex, Maxwell AFB to accommodate approximately 280,000 volumes of books. Temporary shelving shall be provided for approximately eight months. (Please note that the Government intends to provide limited temporary shelving for this purpose, but only about 15% of the total shelving requirement. ) CLIN 0002-AA: Prior to 18 Oct 2011, pack and move approximately 300,000 total volumes of books from Building 1405, Maxwell AFB to Building 833, Gunter Annex. The integrity of all catalogued book order shall be maintained and properly mapped on temporary shelving in building 833, Gunter Annex. CLIN 0003-AA: Moving and packing sixteen (16) SAASS faculty offices, to include 6,000 books from building 1405 and relocating and unpacking books and items into the swing space offices prepared in Building 1403, Maxwell AFB. Move will include selected, miscellaneous furniture items from building 1405. CLIN 0004-AA: Optional Bid Item: At the completion of the appropriate phase of HVAC work in Building 1405, approximately nine months from the date of initial award, the approximately 300,000 volumes of books temporarily stored at Building 833, Gunter Annex shall be repacked and moved back into the permanent shelving available in Building 1405, Maxwell AFB. Again, all cataloged book order/mapping shall be maintained and organized appropriately in Building 1405. Addendum to 52.212-1, Instructions to Offerors. Addendum to 52.212-1 Instructions to Offerors-Commercial Items (Jun 2008) LIST OF ATTACHMENTS: 1. Price List (shall contain a list of components offered along with prices) A. To assure timely and equitable evaluation of proposals, offerors must follow the instructions contained herein. Quotes are required to meet all solicitation requirements, including terms and conditions, representations and certifications, and technical requirements, in addition to those identified as evaluation factors or subfactors. Failure to meet a requirement may be grounds to eliminate the quote from consideration for contract award. Quotes must be complete, self-sufficient, and respond directly to the requirement of the RFQ. The response shall consist of two sections: (1) Technical (2) Past Performance and (3) Price. The Government intends to evaluate quotes and award a purchase order without discussions with offerors. Therefore, initial quote should contain the offeror's best terms from a price standpoint. Submitted documents must be fully responsive to and consistent with the requirement of this RFQ. See Specific Instructions Below: B. Specific Instructions: (1) Technical: An offeror will be determined technically acceptable if no exception is taken to the specifications and requirements of the RFQ. (2) Past Performance: The government will evaluate the quality and extent of offeror's performance deemed relevant to the requirements of this RFQ. The governnment will use informaiton submitted by the Offeror and other sources such as the government-wide Past Performance Information Retrieval System-Statistical Reporting (PPIRS-SR, to assess performance. Please submit at least two references that can provide relevant past performance information. Relevant information is the same or a similar type service as described in this combined synopsis/solicitation. Past performance information, must include contract number, points of contact with telephone numbers and other information the offeror deem relevant for same or similar service described in this combined synopsis/solicitation. (3) Price Quote: The offeror must provide a unit price and net amount price for each line item of the price schedule listed in the RFQ. Addendum, to 52.212-2 EVALUATION-COMMERCIAL ITEMS (JAN 1999) IMPORTANT NOTE: Neither Multiple Offers nor Multiple Awards will be considered. A single award is anticipated to be made in the resultant contract. BASIS FOR AWARD: This is a competitive best value acquisition utilizing simplified acquisition procedures authorized by FAR 13.5, "Test Program for Certain Commercial Items." For quotations determined technically acceptable, a best value selection based on price and past performance will be made. Award will be based on technical acceptability, price and past performance. (1) Technically Acceptabililty: Required technical capabilities will be evaluated on a pass/fail basis by assigning a rating of "MET" or "DID NOT MEET". (2) Past Performance: Past performance will be evaluated based on relevancy (size/scope/complexity), quality of product/service, timeliness of delivery/performance and business relations (customer service). To be considered for award an offeror must be technically acceptable, have a satisfactory or better past performance record based upon information available to the contracting officer and offer a reasonable price. (a) Quantifiable contractor quality and delivery performance data contained within the government-wide Past Performance Information Retrieval System-Statistical Reporting (PPIRS-SR) will be utilized in the evaluation of the past performance factor for offers received in response to this solicitation. Suppliers with no history in PPIRS-SR will be displayed to contracting officers without a rating. (b) PPIRS-SR classifications are established monthly for each supplier and can be reviewed at http://www.ppirs.gov. Suppliers are granted access to PPIRS-SR for their own classifications. Offerors are encouraged to review their own classifications as well as the PPIRS-SR reporting procedures and methodology detailed in the PPIRS-SR Procedures Manual and the PPIRS-SR User Guide available at http://www.ppirs.gov. The method to challenge a rating is also found on the identified website. For the purposes of this evaluation the assessment process will result in an overall performance rating of Exceptional, Satisfactory, Unsatisfactory or Neutral (as defined below). Past Performance Rating Definition Exception Performance meets contractual requirements with many exceeded to the Government's benefit. The contractual performance of the element or sub-element being assessed was accomplished with no more than a few minor problems for which corrective actions taken by the contractor were highly effective. Satisfactory Performance meets contractual requirements. The contractual performance of the element or sub-element contains some minor problems for which corrective actions taken by the contractor were satisfactory. Unsatisfactory Performance does not meet most contractual requirements and recovery is not likely in a timely manner. The contractual performance of the element or sub-element contains a serious problem(s) for which the contractor's corrective actions appear or were ineffective. Neutral Performance was not observed or not applicable to the current effort being reported against. (3) Price: The government will evaluate Attached 2, Price List for reasonableness. The best value decision will be based on the technically acceptable offer, with a satisfactory or better past performance rating. Award may be made to other than the low offeror when the contracting officer determines it to be in the government's best interest. CONTRACT TERMS AND CONDITIONS: The following clauses apply: By reference: 52.204-7 - Central Contractor Registration 52.212-4 -- Contract Terms and Conditions -- Commercial Items 252.204-7004, Alternate A By Full Text: FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders- Commercial Items and the following additional FAR clauses under paragraph (b) are applicable: 52.203-6, Restrictions on Subcontractor Sales to the Government 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards 52.209-6, Protecting the Government's Interests when Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns 52.219-8, Utilization of Small Business Concerns 52.219-28, Post Award Small Business Program Rerepresentation, 52.222-19, Child labor- Cooperation with Authorities and Remedies 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-35, Equal Opportunity for Veterans 52.222-36, Affirmative Action for Workers With Disabilities; 52.222-37, Employment Reports on Veterans 52.222-40, Notification of Employee Rights Under the National Labor Relations Act 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving 52.225-13 Restrictions on Certain Foreign Purchases; 52.232-33 Payment by Electronic Funds Transfer-Central Contractor Registration 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (End of clause) 252.212-7001 Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items. (a) The Contractor agrees to comply with the following Federal Acquisition Regulation (FAR) clause which, is included in this contract by reference to implement a provision of law applicable to acquisitions of commercial items or components. 52.203-3, Gratuities (b) The Contractor agrees to comply with any clause that is on the following list of Defense FAR Supplement clauses which, is included in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items or components. 252.203-7000, Requirements Relating to Compensation of Former DoD Officials 252.225-7001, Buy American Act and Balance of Payments Program 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports 252.243-7002, Requests for Equitable Adjustment 252.247-7023, Transportation of Supplies by Sea 252.225-7039, Contractors Performing Private Security Functions 252.237-7010, Prohibition on Interrogation of Detainees by Contractor Personnel 252.237-7019, Training for Contractor Personnel Interacting with Detainees 252.247-7003, Pass-Through of Motor Carrier Fuel Surcharge Adjustment to the Cost Bearer 252.247-7023, Transportation of Supplies by Sea 252.247-7024, Notification of Transportation of Supplies by Sea (End of clause) 52.212-3 -- Offeror Representations and Certifications -- Commercial Items With Alternate I An offeror shall complete only paragraphs (b) of this provision if the offeror has completed the annual representations and certificates electronically at http://orca.bpn.gov. If an offeror has not completed the annual representations and certifications electronically at the ORCA website, the offeror shall complete only paragraphs (c) through (o) of this provision. (a) Definitions. As used in this provision-- "Economically disadvantaged women-owned small business (EDWOSB) concern" means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program. "Forced or indentured child labor" means all work or service- (1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or (2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties. "Inverted domestic corporation," as used in this section, means a foreign incorporated entity which is treated as an inverted domestic corporation under 6 U.S.C. 395(b), i.e., a corporation that used to be incorporated in the United States, or used to be a partnership in the United States, but now is incorporated in a foreign country, or is a subsidiary whose parent corporation is incorporated in a foreign country, that meets the criteria specified in 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c). An inverted domestic corporation as herein defined does not meet the definition of an inverted domestic corporation as defined by the Internal Revenue Coe at 26 U.S.C. 7874. "Manufactured end product" means any end product in Federal Supply Classes (FSC) 1000-9999, except- (1) FSC 5510, Lumber and Related Basic Wood Materials; (2) Federal Supply Group (FSG) 87, Agricultural Supplies; (3) FSG 88, Live Animals; (4) FSG 89, Food and Related Consumables; (5) FSC 9410, Crude Grades of Plant Materials; (6) FSC 9430, Miscellaneous Crude Animal Products, Inedible; (7) FSC 9440, Miscellaneous Crude Agricultural and Forestry Products; (8) FSC 9610, Ores; (9) FSC 9620, Minerals, Natural and Synthetic; and (10) FSC 9630, Additive Metal Materials. "Place of manufacture" means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture. "Restricted business operations" means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate- (1) Are conducted under contract directly and exclusively with the regional government of southern Sudan; (2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization; (3) Consist of providing goods or services to marginalized populations of Sudan; (4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization; (5) Consist of providing goods or services that are used only to promote health or education; or (6) Have been voluntarily suspended. "Service-disabled veteran-owned small business concern"- (1) Means a small business concern- (i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and (ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran. (2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16). "Small business concern" means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and size standards in this solicitation. "Subsidiary" means an entity in which more than 50 percent of the entity is owned- (1) Directly by a parent corporation; or (2) Through another subsidiary of a parent corporation. "Veteran-owned small business concern" means a small business concern- (1) Not less than 51 percent of which is owned by one or more veterans(as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and (2) The management and daily business operations of which are controlled by one or more veterans. "Women-owned business concern" means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of the its stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women. "Women-owned small business concern" means a small business concern -- (1) That is at least 51 percent owned by one or more women or, in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and (2) Whose management and daily business operations are controlled by one or more women. "Women-owned small business (WOSB) concern eligible under the WOSB Program (in accordance with 13 CFR part 127)," means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States. (b) (1) Annual Representations and Certifications. Any changes provided by the offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications posted on the Online Representations and Certifications Application (ORCA) website. (2) The offeror has completed the annual representations and certifications electronically via the ORCA website at http://orca.bpn.gov.After reviewing the ORCA database information, the offeror verifies by submission of this offer that the representation and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications-Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ____________. [Offeror to identify the applicable paragraphs at (c) through (o) of this provision that the offeror has completed for the purposes of this solicitation only, if any. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer. Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted on ORCA.] (c) Offerors must complete the following representations when the resulting contract is to be performed in the United States or its outlying areas. Check all that apply. (1) Small business concern. The offeror represents as part of its offer that it [_] is, [_] is not a small business concern. (2) Veteran-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents as part of its offer that it [_] is, [_] is not a veteran-owned small business concern. (3) Service-disabled veteran-owned small business concern. [Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.] The offeror represents as part of its offer that it [_] is, [_] is not a service-disabled veteran-owned small business concern. (4) Small disadvantaged business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, for general statistical purposes, that it [_] is, [_] is not, a small disadvantaged business concern as defined in 13 CFR 124.1002. (5) Women-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [_] is, [_] is not a women-owned small business concern. Note: Complete paragraphs (c)(8) and (c)(9) only if this solicitation is expected to exceed the simplified acquisition threshold. (6) WOSB concern eligible under the WOSB Program. [Complete only if the offeror represented itself as a women-owned small business concern in paragraph (c)(5) of this provision.] The offeror prepresents that- (i) It [_] is, [_] is not a WOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and (ii) It [_] is, [_] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(6)(i) of this provision is accurate in reference to the WOSB concern or concerns that are participating in the joint venture. [The offeror shall enter the name or names of the WOSB concern or concerns that are participating in the joint venture: _________.] Each WOSB concern participating in the joint venture shall submit a separate signed copy of the WOSB representation. (7) Economically disadvantaged women-owned small business (EDWOSB) concern. [Complete only if the offeror represented itself as a WOSB concern eligible under the WOSB Program in (c)(6) of this provision.] The offeror represents that- (i) It [_] is, [_] is not an EDWOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and (ii) It [_] is, [_] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(7)(i) of this provision is accurate in reference to the EDWOSB concern or concerns that are participating in the joint venture. The offeror shall enter the name or names of the EDWOSB concern or concerns that are participating in the joint venture: _____________. Each EDWOSB concern participating in the joint venture shall submit a separate signed copy of the EDWOSB representation. (8) Women-owned business concern (other than small business concern). [Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.]. The offeror represents that it [_] is, a women-owned business concern. (9) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price: ___________________________________________ (10) [Complete only if the solicitation contains the clause at FAR 52.219-23, Notice of Price Evaluation Adjustment for Small Disadvantaged Business Concerns, or FAR 52.219-25, Small Disadvantaged Business Participation Program-Disadvantaged Status and Reporting, and the offeror desires a benefit based on its disadvantaged status.] (i) General. The offeror represents that either- (A) It [_] is, [_] is not certified by the Small Business Administration as a small disadvantaged business concern and identified, on the date of this representation, as a certified small disadvantaged business concern in the CCR Dynamic Small Business Search database maintained by the Small Business Administration, and that no material change in disadvantaged ownership and control has occurred since its certification, and, where the concern is owned by one or more individuals claiming disadvantaged status, the net worth of each individual upon whom the certification is based does not exceed $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); or (B) It [_] has, [_] has not submitted a completed application to the Small Business Administration or a Private Certifier to be certified as a small disadvantaged business concern in accordance with 13 CFR 124, Subpart B, and a decision on that application is pending, and that no material change in disadvantaged ownership and control has occurred since its application was submitted. (ii) Joint Ventures under the Price Evaluation Adjustment for Small Disadvantaged Business Concerns. The offeror represents, as part of its offer, that it is a joint venture that complies with the requirements in 13 CFR 124.1002(f) and that the representation in paragraph (c)(10)(i) of this provision is accurate for the small disadvantaged business concern that is participating in the joint venture. [The offeror shall enter the name of the small disadvantaged business concern that is participating in the joint venture: ________________.] (11) HUBZone small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, as part of its offer, that-- (i) It [_] is, [_] is not a HUBZone small business concern listed, on the date of this representation, on the List of Qualified HUBZone Small Business Concerns maintained by the Small Business Administration, and no material changes in ownership and control, principal office, or HUBZone employee percentage have occurred since it was certified in accordance with 13 CFR part 126; and (ii) It [_] is, [_] is not a HUBZone joint venture that complies with the requirements of 13 CFR part 126, and the representation in paragraph (c)(11)(i) of this provision is accurate for each HUBZone small business concern participating in the HUBZone joint venture. [The offeror shall enter the names of each of the HUBZone small business concerns participating in the HUBZone joint venture: __________.] Each HUBZone small business concern participating in the HUBZone joint venture shall submit a separate signed copy of the HUBZone representation. (d) Representations required to implement provisions of Executive Order 11246 -- (1) Previous contracts and compliance. The offeror represents that -- (i) It [_] has, [_] has not, participated in a previous contract or subcontract subject to the Equal Opportunity clause of this solicitation; and (ii) It [_] has, [_] has not, filed all required compliance reports. (2) Affirmative Action Compliance. The offeror represents that -- (i) It [_] has developed and has on file, [_] has not developed and does not have on file, at each establishment, affirmative action programs required by rules and regulations of the Secretary of Labor (41 CFR parts 60-1 and 60-2), or (ii) It [_] has not previously had contracts subject to the written affirmative action programs requirement of the rules and regulations of the Secretary of Labor. (e) Certification Regarding Payments to Influence Federal Transactions (31 U.S.C. 1352). (Applies only if the contract is expected to exceed $150,000.) By submission of its offer, the offeror certifies to the best of its knowledge and belief that no Federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of Congress or an employee of a Member of Congress on his or her behalf in connection with the award of any resultant contract. If any registrants under the Lobbying Disclosure Act of 1995 have made a lobbying contact on behalf of the offeror with respect to this contract, the offeror shall complete and submit, with its offer, OMB Standard Form LLL, Disclosure of Lobbying Activities, to provide the name of the registrants. The offeror need not report regularly employed officers or employees of the offeror to whom payments of reasonable compensation were made. (f) Buy American Act Certificate. (Applies only if the clause at Federal Acquisition Regulation (FAR) 52.225-1, Buy American Act - Supplies, is included in this solicitation.) (1) The offeror certifies that each end product, except those listed in paragraph (f)(2) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of "domestic end product." The terms "commercially available off-the-shelf (COTS) item," "component," "domestic end product," "end product," "foreign end product," and "United States" are defined in the clause of this solicitation entitled "Buy American Act-Supplies." (2) Foreign End Products: LINE ITEM NO. COUNTRY OF ORIGIN [List as necessary] (3) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. (g) (1) Buy American Act -- Free Trade Agreements -- Israeli Trade Act Certificate. (Applies only if the clause at FAR 52.225-3, Buy American Act -- Free Trade Agreements -- Israeli Trade Act, is included in this solicitation.) (i) The offeror certifies that each end product, except those listed in paragraph (g)(1)(ii) or (g)(1)(iii) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The terms "Bahrainian, Moroccan, Omani, or Peruvian end product," "commercially available off-the-shelf (COTS) item," "component," "domestic end product," "end product," "foreign end product," "Free Trade Agreement country," "Free Trade Agreement country end product," "Israeli end product," and ‘United States' are defined in the clause of this solicitation entitled "Buy American Act--Free Trade Agreements--Israeli Trade Act." (ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Moroccan, Omani, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled "Buy American Act-Free Trade Agreements-Israeli Trade Act": Free Trade Agreement Country End Products (Other than Bahrainian or Moroccan End Products) or Israeli End Products: LINE ITEM NO. COUNTRY OF ORIGIN [List as necessary] (iii) The offeror shall list those supplies that are foreign end products (other than those listed in paragraph (g)(1)(ii) or this provision) as defined in the clause of this solicitation entitled "Buy American Act-Free Trade Agreements-Israeli Trade Act." The offeror shall list as other foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of "domestic end product." Other Foreign End Products: LINE ITEM NO. COUNTRY OF ORIGIN [List as necessary] (iv) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. (2) Buy American Act-Free Trade Agreements-Israeli Trade Act Certificate, Alternate I. If Alternate I to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision: (g)(1)(ii) The offeror certifies that the following supplies are Canadian end products as defined in the clause of this solicitation entitled "Buy American Act-Free Trade Agreements-Israeli Trade Act": Canadian End Products: Line Item No.: ___________________________________________ [List as necessary] (3) Buy American Act-Free Trade Agreements-Israeli Trade Act Certificate, Alternate II. If Alternate II to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision: (g)(1)(ii) The offeror certifies that the following supplies are Canadian end products or Israeli end products as defined in the clause of this solicitation entitled ``Buy American Act--Free Trade Agreements--Israeli Trade Act'': Canadian or Israeli End Products: Line Item No.: Country of Origin: [List as necessary] (4) Trade Agreements Certificate. (Applies only if the clause at FAR 52.225-5, Trade Agreements, is included in this solicitation.) (i) The offeror certifies that each end product, except those listed in paragraph (g)(4)(ii) of this provision, is a U.S.-made or designated country end product as defined in the clause of this solicitation entitled "Trade Agreements." (ii) The offeror shall list as other end products those end products that are not U.S.-made or designated country end products. Other End Products Line Item No.: Country of Origin: [List as necessary] (iii) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. For line items covered by the WTO GPA, the Government will evaluate offers of U.S.-made or designated country end products without regard to the restrictions of the Buy American Act. The Government will consider for award only offers of U.S.-made or designated country end products unless the Contracting Officer determines that there are no offers for such products or that the offers for such products are insufficient to fulfill the requirements of the solicitation. (h) Certification Regarding Responsibility Matters (Executive Order 12689). (Applies only if the contract value is expected to exceed the simplified acquisition threshold.) The offeror certifies, to the best of its knowledge and belief, that the offeror and/or any of its principals-- (1) [_] Are, [_] are not presently debarred, suspended, proposed for debarment, or declared ineligible for the award of contracts by any Federal agency; (2) [_] Have, [_] have not, within a three-year period preceding this offer, been convicted of or had a civil judgment rendered against them for: commission of fraud or a criminal offense in connection with obtaining, attempting to obtain, or performing a Federal, state or local government contract or subcontract; violation of Federal or state antitrust statutes relating to the submission of offers; or commission of embezzlement, theft, forgery, bribery, falsification or destruction of records, making false statements, tax evasion, violating Federal criminal tax laws, or receiving stolen property; and (3) [_] Are, [_] are not presently indicted for, or otherwise criminally or civilly charged by a Government entity with, commission of any of these offenses enumerated in paragraph (h)(2) of this clause; and (4) [_] Have, [_] have not, within a three-year period preceding this offer, been notified of any delinquent Federal taxes in an amount that exceeds $3,000 for which the liability remains unsatisfied. (i) Taxes are considered delinquent if both of the following criteria apply: (A) The tax liability is finally determined. The liability is finally determined if it has been assessed. A liability is not finally determined if there is a pending administrative or judicial challenge. In the case of a judicial challenge to the liability, the liability is not finally determined until all judicial appeal rights have been exhausted. (B) The taxpayer is delinquent in making payment. A taxpayer is delinquent if the taxpayer has failed to pay the tax liability when full payment was due and required. A taxpayer is not delinquent in cases where enforced collection action is precluded. (ii) Examples. (A) The taxpayer has received a statutory notice of deficiency, under I.R.C. §6212, which entitles the taxpayer to seek Tax Court review of a proposed tax deficiency. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek Tax Court review, this will not be a final tax liability until the taxpayer has exercised all judicial appear rights. (B) The IRS has filed a notice of Federal tax lien with respect to an assessed tax liability, and the taxpayer has been issued a notice under I.R.C. §6320 entitling the taxpayer to request a hearing with the IRS Office of Appeals Contesting the lien filing, and to further appeal to the Tax Court if the IRS determines to sustain the lien filing. In the course of the hearing, the taxpayer is entitled to contest the underlying tax liability because the taxpayer has had no prior opportunity to contest the liability. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek tax court review, this will not be a final tax liability until the taxpayer has exercised all judicial appeal rights. (C) The taxpayer has entered into an installment agreement pursuant to I.R.C. §6159. The taxpayer is making timely payments and is in full compliance with the agreement terms. The taxpayer is not delinquent because the taxpayer is not currently required to make full payment. (D) The taxpayer has filed for bankruptcy protection. The taxpayer is not delinquent because enforced collection action is stayed under 11 U.S.C. §362 (the Bankruptcy Code). (i) Certification Regarding Knowledge of Child Labor for Listed End Products (Executive Order 13126). [The Contracting Officer must list in paragraph (i)(1) any end products being acquired under this solicitation that are included in the List of Products Requiring Contractor Certification as to Forced or Indentured Child Labor, unless excluded at 22.1503(b).] (1) Listed End Product Listed End Product: Listed Countries of Origin: (2) Certification. [If the Contracting Officer has identified end products and countries of origin in paragraph (i)(1) of this provision, then the offeror must certify to either (i)(2)(i) or (i)(2)(ii) by checking the appropriate block.] [_] (i) The offeror will not supply any end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product. [_] (ii) The offeror may supply an end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product. The offeror certifies that is has made a good faith effort to determine whether forced or indentured child labor was used to mine, produce, or manufacture any such end product furnished under this contract. On the basis of those efforts, the offeror certifies that it is not aware of any such use of child labor. (j) Place of manufacture. (Does not apply unless the solicitation is predominantly for the acquisition of manufactured end products.) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly- (1) [_] In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or (2) [_] Outside the United States. (k) Certificates regarding exemptions from the application of the Service Contract Act. (Certification by the offeror as to its compliance with respect to the contract also constitutes its certification as to compliance by its subcontractor if it subcontracts out the exempt services.) [The contracting officer is to check a box to indicate if paragraph (k)(1) or (k)(2) applies.] (1) [_] Maintenance, calibration, or repair of certain equipment as described in FAR 22.1003-4(c)(1). The offeror [_] does [_] does not certify that- (i) The items of equipment to be serviced under this contract are used regularly for other than Governmental purposes and are sold or traded by the offeror (or subcontractor in the case of an exempt subcontract) in substantial quantities to the general public in the course of normal business operations; (ii) The services will be furnished at prices which are, or are based on, established catalog or market prices (see FAR 22.1003-4(c)(2)(ii)) for the maintenance, calibration, or repair of such equipment; and (iii) The compensation (wage and fringe benefits) plan for all service employees performing work under the contract will be the same as that used for these employees and equivalent employees servicing the same equipment of commercial customers. (2) [_] Certain services as described in FAR 22.1003-4(d)(1). The offeror [_] does [_] does not certify that- (i) The services under the contract are offered and sold regularly to non-Governmental customers, and are provided by the offeror (or subcontractor in the case of an exempt subcontract) to the general public in substantial quantities in the course of normal business operations; (ii) The contract services will be furnished at prices that are, or are based on, established catalog or market prices (see FAR 22.1003-4(d)(2)(iii)); (iii) Each service employee who will perform the services under the contract will spend only a small portion of his or her time (a monthly average of less than 20 percent of the available hours on an annualized basis, or less than 20 percent of available hours during the contract period if the contract period is less than a month) servicing the Government contract; and (iv) The compensation (wage and fringe benefits) plan for all service employees performing work under the contract is the same as that used for these employees and equivalent employees servicing commercial customers. (3) If paragraph (k)(1) or (k)(2) of this clause applies- (i) If the offeror does not certify to the conditions in paragraph (k)(1) or (k)(2) and the Contracting Officer did not attach a Service Contract Act wage determination to the solicitation, the offeror shall notify the Contracting Officer as soon as possible; and (ii) The Contracting Officer may not make an award to the offeror if the offeror fails to execute the certification in paragraph (k)(1) or (k)(2) of this clause or to contact the Contracting Officer as required in paragraph (k)(3)(i) of this clause. (l) Taxpayer identification number (TIN) (26 U.S.C. 6109, 31 U.S.C. 7701). (Not applicable if the offeror is required to provide this information to a central contractor registration database to be eligible for award.) (1) All offerors must submit the information required in paragraphs (l)(3) through (l)(5) of this provision to comply with debt collection requirements of 31 U.S.C. 7701(c) and 3325(d), reporting requirements of 26 U.S.C. 6041, 6041A, and 6050M, and implementing regulations issued by the Internal Revenue Service (IRS). (2) The TIN may be used by the government to collect and report on any delinquent amounts arising out of the offeror's relationship with the Government (31 U.S.C. 7701(c)(3)). If the resulting contract is subject to the payment reporting requirements described in FAR 4.904, the TIN provided hereunder may be matched with IRS records to verify the accuracy of the offeror's TIN.] (3) Taxpayer Identification Number (TIN). [_] TIN:_____________________. [_] TIN has been applied for. [_] TIN is not required because: [_] Offeror is a nonresident alien, foreign corporation, or foreign partnership that does not have income effectively connected with the conduct of a trade or business in the United States and does not have an office or place of business or a fiscal paying agent in the United States; [_] Offeror is an agency or instrumentality of a foreign government; [_] Offeror is an agency or instrumentality of the Federal Government; (4) Type of organization. [_] Sole proprietorship; [_] Partnership; [_] Corporate entity (not tax-exempt); [_] Corporate entity (tax-exempt); [_] Government entity (Federal, State, or local); [_] Foreign government; [_] International organization per 26 CFR 1.6049-4; [_] Other ____________________. (5) Common parent. [_] Offeror is not owned or controlled by a common parent: [_] Name and TIN of common parent: Name ____________________________________ TIN ______________________________________ (m) Restricted business operations in Sudan. By submission of its offer, the offeror certifies that the offeror does not conduct any restricted business operations in Sudan. (n) Prohibition on Contracting with Inverted Domestic Corporations- (1) Relation to Internal Revenue Code. An inverted domestic corporation as herein defined does not meet the definition of an inverted domestic corporation as defined by the Internal Revenue Code 25 U.S.C. 7874. (2) Representation. By submission of its offer, the offeror represents that- (i) It is not an inverted domestic corporation; and (ii) It is not a subsidiary of an inverted domestic corporation. (o) Sanctioned activities relating to Iran. (1) Unless a waiver is granted or an exception applies as provided in paragraph (o)(2) of this provision, by submission of its offer, the offeror certifies that the offeror, or any person owned or controlled by the offeror, does not engage in any activities for which sanctions may be imposed under section 5 of the Iran Sanctions Act of 1996. (2) The certification requirement of paragraph (o)(1) of this provision does not apply if-- (i) This solicitation includes a trade agreements certification (e.g., 52.212-3(g) or a comparable agency provision); and (ii) The offeror has certified that all the offered products to be supplied are designated country end products. Alternate I (Apr 2011). (12) (Complete if the offeror has represented itself as disadvantaged in paragraph (c)(4) or (c)(10) of this provision.) [The offeror shall check the category in which its ownership falls]: ____ Black American. ___ Hispanic American. ___ Native American (American Indians, Eskimos, Aleuts, or Native Hawaiians). ___ Asian-Pacific American (persons with origins from Burma, Thailand, Malaysia, Indonesia, Singapore, Brunei, Japan, China, Taiwan, Laos, Cambodia (Kampuchea), Vietnam, Korea, The Philippines, U.S. Trust Territory or the Pacific Islands (Republic of Palau), Republic of the Marshall Islands, Federated States of Micronesia, the Commonwealth of the Northern Mariana Islands, Guam, Samoa, Macao, Hong Kong, Fiji, Tonga, Kiribati, Tuvalu, or Nauru). ___ Subcontinent Asian (Asian-Indian) American (persons with origins from India, Pakistan, Bangladesh, Sri Lanka, Bhutan, the Maldives Islands, or Nepal). ___ Individual/concern, other than one of the preceding. (End of provision) 252.212-7000 Offeror Representations and Certifications--Commercial Items. (a) Definitions. As used in this clause- (1) "Foreign person" means any person other than a United States person as defined in Section 16(2) of the Export Administration Act of 1979 (50 U.S.C. App. Sec. 2415). (2) "United States" means the 50 States, the District of Columbia, outlying areas, and the outer Continental Shelf as defined in 43 U.S.C. 1331. (3) "United States person" is defined in Section 16(2) of the Export Administration Act of 1979 and means any United States resident or national (other than an individual resident outside the United States and employed by other than a United States person), any domestic concern (including any permanent domestic establishment of any foreign concern), and any foreign subsidiary or affiliate (including any permanent foreign establishment) of any domestic concern which is controlled in fact by such domestic concern, as determined under regulations of the President. (b) Certification. By submitting this offer, the Offeror, if a foreign person, company or entity, certifies that it- (1) Does not comply with the Secondary Arab Boycott of Israel; and (2) Is not taking or knowingly agreeing to take any action, with respect to the Secondary Boycott of Israel by Arab countries, which 50 U.S.C. App. Sec. 2407(a) prohibits a United States person from taking. (c) Representation of Extent of Transportation by Sea. (This representation does not apply to solicitations for the direct purchase of ocean transportation services). (1) The Offeror shall indicate by checking the appropriate blank in paragraph (c)(2) of this provision whether transportation of supplies by sea is anticipated under the resultant contract. The term "supplies" is defined in the Transportation of Supplies by Sea clause of this solicitation. (2) Representation. The Offeror represents that it- ___________Does anticipate that supplies will be transported by sea in the performance of any contract or subcontract resulting from this solicitation. ___________Does not anticipate that supplies will be transported by sea in the performance of any contract or subcontract resulting from this solicitation. (3) Any contract resulting from this solicitation will include the Transportation of Supplies by Sea clause. If the Offeror represents that it will not use ocean transportation, the resulting contract will also include the Defense Federal Acquisition Regulation Supplement clause at 252.247-7024, Notification of Transportation of Supplies by Sea. 252.204-7006 Billing Instructions. As prescribed in 204.7109, use the following clause: BILLING INSTRUCTIONS (OCT 2005) When submitting a request for payment, the Contractor shall- (a) Identify the contract line item(s) on the payment request that reasonably reflect contract work performance; and (b) Separately identify a payment amount for each contract line item included in the payment request. (End of clause) 252.211-7003 Item Identification and Valuation. (a) Definitions. As used in this clause- "Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media. "Concatenated unique item identifier" means- (1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or (2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number. "Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows. "DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html. "DoD unique item identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number. "Enterprise" means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items. "Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency. "Government's unit acquisition cost" means- (1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery; (2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and (3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery. "Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise (i.e., Dun & Bradstreet's Data Universal Numbering System (DUNS) Number, GS1 Company Prefix, Allied Committee 135 NATO Commercial and Government Entity (NCAGE)/ Commercial and Government Entity (CAGE) Code, or the Coded Representation of the North American Telecommunications Industry Manufacturers, Suppliers, and Related Service Companies (ATIS-0322000) Number), European Health Industry Business Communication Council (EHIBCC) and Health Industry Business Communication Council (HIBCC)), as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.nen.nl/web/Normen-ontwikkelen/ISOIEC-15459-Issuing-Agency-Codes.htm. "Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier. "Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts. "Lot or batch number" means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions. "Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards. "Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface. "Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent. "Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise. "Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment. "Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier. "Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier. "Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent. "Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html. (b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item. (c) Unique item identifier. (1) The Contractor shall provide a unique item identifier for the following: (i) All delivered items for which the Government's unit acquisition cost is $5,000 or more. (ii) The following items for which the Government's unit acquisition cost is less than $5,000: Contract Line, Subline, or Exhibit Line Item Number Item Description ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ (iii) Subassemblies, components, and parts embedded within delivered items as specified in Attachment Number ____. (2) The unique item identifier and the component data elements of the DoD unique item identification shall not change over the life of the item. (3) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that- (i) The encoded data elements (except issuing agency code) of the unique item identifier are marked on the item using one of the following three types of data qualifiers, as determined by the Contractor: (A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard. (B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard. (C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and (ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology - Transfer Syntax for High Capacity Automatic Data Capture Media. (4) Unique item identifier. (i) The Contractor shall- (A) Determine whether to- (1) Serialize within the enterprise identifier; (2) Serialize within the part, lot, or batch number; or (3) Use a DoD recognized unique identification equivalent; and (B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in the version of MIL-STD-130, Identification Marking of U.S. Military Property, cited in the contract Schedule. (ii) The issuing agency code- (A) Shall not be placed on the item; and (B) Shall be derived from the data qualifier for the enterprise identifier. (d) For each item that requires unique item identification under paragraph (c)(1)(i) or (ii) of this clause, in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, either as part of, or associated with, the Material Inspection and Receiving Report, the following information: (1) Unique item identifier. (2) Unique item identifier type. (3) Issuing agency code (if concatenated unique item identifier is used). (4) Enterprise identifier (if concatenated unique item identifier is used). (5) Original part number (if there is serialization within the original part number). (6) Lot or batch number (if there is serialization within the lot or batch number). (7) Current part number (optional and only if not the same as the original part number). (8) Current part number effective date (optional and only if current part number is used). (9) Serial number (if concatenated unique item identifier is used). (10) Government's unit acquisition cost. (11) Unit of measure. (e) For embedded subassemblies, components, and parts that require DoD unique item identification under paragraph (c)(1)(iii) of this clause, the Contractor shall report as part of, or associated with, the Material Inspection and Receiving Report specified elsewhere in this contract, the following information: (1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part. (2) Unique item identifier of the embedded subassembly, component, or part. (3) Unique item identifier type.** (4) Issuing agency code (if concatenated unique item identifier is used).** (5) Enterprise identifier (if concatenated unique item identifier is used).** (6) Original part number (if there is serialization within the original part number).** (7) Lot or batch number (if there is serialization within the lot or batch number).** (8) Current part number (optional and only if not the same as the original part number).** (9) Current part number effective date (optional and only if current part number is used).** (10) Serial number (if concatenated unique item identifier is used).** (11) Description. ** Once per item. (f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause in accordance with the data submission procedures at http://www.acq.osd.mil/dpap/pdi/uid/data_submission_information.html. (g) Subcontracts. If the Contractor acquires by subcontract, any item(s) for which unique item identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s). (End of clause) 252.225-7000 Buy American Act--Balance of Payments Program Certificate. (a) Definitions. "Commercially available off-the-shelf (COTS) item," "component," "domestic end product," "foreign end product," "qualifying country," "qualifying country end product," and "United States" have the meanings given in the Buy American Act and Balance of Payments Program clause of this solicitation. (b) Evaluation. The Government- (1) Will evaluate offers in accordance with the policies and procedures of Part 225 of the Defense Federal Acquisition Regulation Supplement; and (2) Will evaluate offers of qualifying country end products without regard to the restrictions of the Buy American Act or the Balance of Payments Program. (c) Certifications and identification of country of origin. (1) For all line items subject to the Buy American Act and Balance of Payments Program clause of this solicitation, the offeror certifies that- (i) Each end product, except those listed in paragraphs (c)(2) or (3) of this provision, is a domestic end product; and (ii) For end products other than COTS items, components of unknown origin are considered to have been mined, produced, or manufactured outside the United States or a qualifying country. (2) The offeror certifies that the following end products are qualifying country end products: Line Item Number Country of Origin (3) The following end products are other foreign end products, including end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (ii) of the definition of "domestic end product": Line Item Number Country of Origin (If known) (End of provision) 52.252-2, CLAUSES INCORPORATED BY REFERENCE, This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address (es): http://farsite.hill.af.mil (End of clause) AFFARS 5352.201-9101 Ombudsman (a) An ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern. The existence of the ombudsman does not affect the authority of the program manager, contracting officer, or source selection official. Further, the ombudsman does not participate in the evaluation of proposals, the source selection process, or the adjudication of protests or formal contract disputes. The ombudsman may refer the party to another official who can resolve the concern. (b) Before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/or recommendations to the contracting officer for resolution. Consulting an ombudsman does not alter or postpone the timelines for any other processes (e.g., agency level bid protests, GAO bid protests, requests for debriefings, employee-employer actions, contests of OMB Circular A-76 competition performance decisions). (c) If resolution cannot be made by the contracting officer, concerned parties may contact the Center/MAJCOM or AFISRA ombudsmen, [Primary: Mr. David Jones, Deputy Chief, Contracting Division, HQ AETC/A7K; Alternate: Mr. Stephen Smith, Chief, Acquisition Support Branch, HQ AETC/A7KA; Address: 2035 First Street West, Ste 1, Randolph AFB TX 78150-4324,Telephone Numbers:(210) 652 - 7907 or (210) 652-7075; Facsimile Number: (210) 652-8344; and E-mail Addresses: david.jones@randolph.af.mil or stephen.smith@randolph.af.mil ]. Concerns, issues, disagreements, and recommendations that cannot be resolved at the MAJCOM/DRU or ARISRA level, may be brought by the concerned party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (703) 588-7004, facsimile number (703) 588-1067. (d) The ombudsman has no authority to render a decision that binds the agency. (e) Do not contact the ombudsman to request copies of the solicitation, verify offer due date, or clarify technical requirements. Such inquiries shall be directed to the Contracting Officer. (End of clause) Note 1 REQUIRED POSTERS Please utilize the following website to access and download as appropriate EEO posters, Service Contract posters, and disability posters required in accordance with 52.222-26, 52.222-41, and 52.222-36 respectively. http://www.dol.gov/osbp/sbrefa/poster/main.htm INVOICING INSTRUCTIONS AND PAYMENTS FOR SUPPLIES/SERVICES Note 2 WAWF-ELECTRONIC SUBMISSION OF INVOICE Reference DFAR Clause 252.232-7003 "ELECTRONIC SUBMISSION OF PAYMENT REQUESTS." Invoices shall be submitted and accepted using Wide Area Workflow (WAWF) web-based system at https://wawf.eb.mil. For information on WAWF including web-based training, visit the web-site and click on "About WAWF". The web-site also contains detailed instructions for setting up your computer to achieve the best results with the system. If you have additional questions contact the WAWF-RA Customer Helpdesk at (866) 618-5988, Option 2 The following information codes will be required to submit your invoices correctly through WAWF: SELECT TYPE OF INVOICE: Contract Specialist/Administrator select only one (1) of the following: 1 Invoice and Receiving Report (Combo) (Creates two documents, an Invoice and a Receiving Report, within one data entry session (Combo). Creating both documents at the same time, rather than separately, is recommended. 0 Construction Invoice (Creates a Construction Payment Invoice from a contract for construction. Both an Inspector and a Contracting Officer must review and accept). Contract Number: Block 2 of the SF1449 Form (If this is a GSA Delivery Order award, enter the GSA NUMBER) Delivery Order: Block 4 of (Order Number) of SF1449 No Dashes - (if applicable) Pay DoDAAC: Block 16a (Payment will be made by) of SF1449 - Pay DoDAAC code is used to route documents to the Defense Finance Accounting office responsible for payment. The accounts payable mailing address can be located in Block 18a of SF1449. You can easily access payment information using the DFAS web site at http://www.dod.mil/dfas. Your contract/purchase order number or invoice will be required to inquire status of your payment. Issue by DoDAAC: Block 9 (Issued by) of SF1449. Contracting office that issued your contract - WAWF uses the code to route the document to the base. Admin DoDAAC: Block 16 (Administered by) of SF1449) Ship-To Code: Block 15 (Deliver To) of SF1449 - This is a crucial piece of information. It will be different for almost every contract issued. Ship-From Code: Not a required field for Air Force contracts. Inspected by DoDAAC: Block 15 (Deliver to) of SF1449 - If an inspection is called for in the document, then you must provide the DoDAAC/Ext this code identifies the inspector. Service Acceptor: Block 15 (Deliver to) of SF1449 - It is used to route documents to receiving service acceptor in WAWF. LPO DoDAAC/Ext: Not a required field for Air Force contracts. ADDITIONAL E-MAIL NOTIFICATIONS: The CONTRACTOR and the DFAS Office will automatically receive a notice; after clicking SUBMIT WAWF will prompt for additional email submissions. The following E-Mail addresses MUST be input in order to prevent delays in processing: Receiver/Acceptor: TBD at time of award@maxwell.af.mil Contract Specialist: eldrae.perdue@maxwell.af.mil Contracting Officer: deborah.downey @maxwell.af.mil In addition to the requirement of this local clause, the Contractor shall meet the requirements of the appropriate payment clauses in this contract when submitting payment requests. The following provisions apply: By reference: FAR 52.212-1 -- Instructions to Offerors -- Commercial Items (Jun 2008), applies to this acquisition ans is addended to delete paragraphs (e) multiple offers and (h) multiple awards. Responses to this notice shall be provided in writing via e-mail to: Eldrae Perdue: eldrae.perdue@maxwell.af.mil l. All responses shall be received NLT 12:00 PM CST on 27 Sep 11. Email is the preferred method. Points of Contact: Eldrae Perdue, Contracting Specialist, Phone (334) 953-2443, Fax (334) 953-2198. Alternate Point of Contact is Edwin Byrd: edwin.byrd@maxwell.af.mil, Phone (334) 953-3525 ATTACHMENT 1 Statement of Objectives The scope of work for this modification consists of providing all materials, equipment, and labor to move approximately 300,000 books and selected equipment from the areas designated as HVAC Phase 1 of the subject project in Building 1405 into Building 833 at Gunter Annex, Maxwell AFB. Contractor must also provide approximately 85% of the required, adequate, temporary shelving to display Library Volumes for browsing/access while stored in Building 833. Contractor will also be required to move the SAASS faculty offices and books from Building 1405 to Building 1403 at Maxwell AFB. Scope of work shall include a bid option, to be executed approximately nine months from the date of initial award, to move the books back to Building 1405 (from Building 833) at the completion of the corresponding phase of HVAC work in building 1405. Requirements: Movement of Book Stacks from building 1405, Maxwell AFB to Building 833, Gunter Annex: 1. Provide adequate, temporary shelving in Building 833, Gunter Annex, Maxwell AFB to accommodate approximately 280,000 volumes of books. Please note that the Government intends to provide limited temporary shelving for this purpose, but only about 15% of the total shelving requirement. Temporary shelving shall be provided for approximately eight months. 2. Prior to 18 Oct 2011, pack and move approximately 300,000 total volumes of books from Building 1405, Maxwell AFB to Building 833, Gunter Annex. The integrity of all catalogued book order shall be maintained and properly mapped on temporary shelving in building 833, Gunter Annex. Movement of SAASS faculty offices and books: 1. Contractor shall be responsible for packing and moving sixteen (16) faculty offices, to include 6,000 books from building 1405 and relocating and unpacking books and items into the swing space offices prepared in Building 1403, Maxwell AFB. Move will include selected, miscellaneous furniture items from building 1405. Optional Bid Item: Movement of Book Stacks back from Building 833, Gunter Annex to building 1405, Maxwell AFB: 1. At the completion of the appropriate phase of HVAC work in Building 1405, approximately nine months from the date of initial award, the approximately 300,000 volumes of books temporarily stored at Building 833, Gunter Annex shall be repacked and moved back into the permanent shelving available in Building 1405, Maxwell AFB. Again, all cataloged book order/mapping shall be maintained and organized appropriately in Building 1405.
Web Link: FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AETC/MaxAFBCS/F2XHE21264A001/listing.html)
Place of Performance: Address: ADAL AIR UNIVERSITY LIBRARY, Building 1405, Maxwell AFB, Alabama, 36112, United States; Zip Code: 36112
Record: SN02586161-W 20110923/110921235845-2a362a721c0191d1476ce18e3aecefea (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

81 -- Furnishing all equipment, materials, and labor to move approximately 300,000 books and selected equipment from the areas in Building 1405 into Building 833 at Gunter Annex, Maxwell AFB.