MODIFICATION
Y -- LBL PIPING HEAT TRACE & INSULATION
- Notice Date
- 9/9/2011
- Notice Type
- Modification/Amendment
- NAICS
- 238990
— All Other Specialty Trade Contractors
- Contracting Office
- Department of Energy, Bechtel National, Inc. (DOE Contractor), Bechtel National Inc., 2435 Stevens Center Place, Richland, Washington, 99352
- ZIP Code
- 99352
- Solicitation Number
- 24590-CM-SRA-NNP0-00001
- Point of Contact
- Winifred Renz, Phone: 5093712338
- E-Mail Address
-
werenz@bechtel.com
(werenz@bechtel.com)
- Small Business Set-Aside
- N/A
- Description
- LBL Piping Heat Trace & Insulation Subcontract Requisition Number: 24590-CM-SRA-NNP0-00001 Submit Interest By: February 06, 2012 Estimated Budget: >$1,000,000 and <$5,000,000 Schedule: •· Issue Request for Proposal: March 2012 •· Award and Notice to Proceed: July 2012 •· Start Work: July 2012 •· All Work Complete: TBD 2014 Safety Classification: NON-ITS Additional Characteristic: None Quality Level: CM Type of Subcontract: IDIQ Utilizing Firm Fixed Price PROJECT DESCRIPTION AND LOCATION The Hanford Tank Waste Treatment and Immobilization Plant (WTP) is a complex of radioactive waste treatment processing facilities designed and constructed by Bechtel National, Inc. for the Department of Energy (DOE). The facility will process the Hanford Site tank waste and convert the waste into a stable glass form. The Project site is located in the 200 East Area of the Hanford Reservation near Richland, Washington, along the Columbia River. The site elevation varies from 662 to 684 feet above mean sea level. Ambient temperature range is -23 degrees F minimum to 113 degrees F maximum, with relative humidity of 5% minimum to 100% maximum. The project design life is 40 years. SCOPE OF WORK SUBCONTRACTOR shall provide, all necessary labor, supervision/inspection/technical/professional/design services, design drawings, specifications, calculations, documentation, operations, maintenance, installation manuals, and including system start up, acceptance test, functional test, system lay-up, system operation, and emergency response procedures. SUBCONTRACTOR shall provide, all materials (temporary and permanent), all construction equipment, all consumables and supplies, all tools, all storage, all testing and inspection, all certifications, and any other items including testing, storage, transportation and delivery of material, that may become necessary to supply, install, support, prescribed insulation and heat trace installation. Design can be conducted at SUBCONTRACTOR's facility. Installation will on the Hanford site and involves insulation and electric heat trace for the following facilities Low-Activity Waste (LAW), Analytical Laboratory (LAW), and Balance of Facility (BOF).The highest temperature is steam at < 400F, systems include; condensate, chill water, domestic water, demineralized, water, and fuel oil. Work is about 75% inside, the remainder on elevated yard piping. Approximately 50% of piping is heat traced. QUALITY ASSURANCE (QA) REQUIREMENTS Programmatic Quality Assurance requirements for subcontracts performed in the WTP Jobsite will be "NP" (non permanent or temporary work, generally no QA Program required), "CM" (commercial quality based the requirements in DOE Order 414.1C), or "QL" (nuclear level quality based on the requirements in ASME NQA-1 2000). Bechtel may require, as an element of bidder pre-qualification, submission of a representative sample QA Program or Table of Contents copy. For QL subcontracts, the successful bidder's QA Program must be approved prior to award of the subcontract. CODES (SAMPLE) American Society for Testing and Materials (ASTM) A 240 Specification for Heat Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels B 209 Specification for Aluminum and Aluminum-Alloy Sheet and Plate C 552 Specification for Cellular Glass Block and Pipe Thermal Insulation C 585 Recommended Practice for Inner and Outer Diameters of Rigid Thermal Insulation for Nominal Sizes of Pipe and Tubing (NPS System) C 692 Test Method for Evaluating the Influence of Thermal Insulations on the External Stress Corrosion Cracking Tendency of Austenitic Steel C 795 Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel C 871 Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions D 312 Specification for Asphalt Used in Roofing MICA National Commercial Insulation Standards Process Industry Practices (PIP) INIH 1000 Hot Insulation Installation Details US Department of Energy (DOE) Orders BIDDER REGISTRATION AND PRE-QUALIFICATION Preliminary Pre-Qualification Requirements The BNI Acquisition Services Subcontracts group, is responsible for collection, evaluation, and internal publication of potential bidders' information for the purpose of pre-qualifying them to bid on any particular subcontract. As part of this process, BNI requires all potential offerors to register at the Supplier and Contractor Portal at: Prior to being considered for bidding on a Request For Proposal (RFP) for this WTP web posting opportunity, potential bidders must complete and submit the required forms located at http://www.hanfordvitplant.com/supplier_resources/qualification_process/ All information provided shall be strictly confidential. Registration All bidders must register with Bechtel National, Inc. for Work on the WTP Project. https://supplier.bechtel.com If your company has registered previously, then only supplemental information should be sent to the Bechtel National, Inc. representative noted below. Information to be provided by potential bidders must include: •· Dun and Bradstreet #: •· Company Name: •· Company Address: •· Contact Phone #: •· Contact Fax #: •· Contact Person: •· E-mail Address: •· Safety data and information •· Applicable work experience and Projects WTP BACKGROUND Information about the WTP Project can be found on http://www.hanfordvitplant.com CONTACT Bechtel National, Inc. 2435 Stevens Center Place Richland, WA 99354 Attn: Deborah S. Mackay Tel. No. 509.371.2160 Email address: dsmith@bechtel.com Mailstop: MS14-3A
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOE/BNI/BNI/24590-CM-SRA-NNP0-00001/listing.html)
- Place of Performance
- Address: Hanfor Site -, The Project site is located in the 200 East Area of the Hanford Reservation near Richland, Washington, along the Columbia River. The site elevation varies from 662 to 684 feet above mean sea level. Ambient temperature range is -23 degrees F minimum to 113 degrees F maximum, with relative humidity of 5% minimum to 100% maximum., Richland, Washington, 99337, United States
- Zip Code: 99337
- Zip Code: 99337
- Record
- SN02570042-W 20110911/110910000510-987d9f8dc5bd5098d0127f14ef854e88 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |