Loren Data's SAM Daily™

FBO DAILY ISSUE OF SEPTEMBER 09, 2011 FBO #3576
MODIFICATION

51 -- ROLL AROUND TOOL KIT

Notice Date

9/7/2011
 

Notice Type

Modification/Amendment
 

NAICS

444130 — Hardware Stores
 

Contracting Office

ACC - Rock Island - C3 (ACC-RI-C3), Bldg 60, 3rd Floor, Rock Island, IL 52807
 

ZIP Code

52807
 

Solicitation Number

F3UUBG1238A005
 

Response Due

9/16/2011
 

Archive Date

11/15/2011
 

Point of Contact

Keisha N. Robinson, 3097824369
 

E-Mail Address

ACC - Rock Island - C3 (ACC-RI-C3)
(keisha.n.robinson.mil@mail.mil)
 

Small Business Set-Aside

Total Small Business
 

Description

U.S. DEPARTMENT OF DEFENSE U.S. ARMY REQUEST FOR QUOTE F3UUBG1236A005 Please read the entire solicitation carefully before submitting your bid. Bids not conforming to the specifications herein will be disqualified and discarded. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6 in accordance with procedures described in FAR part 13.1. And FAR part 13.5, Commercial Item Test Program, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. The reference number for this procurement is F3UUBG1236A005 and is issued as a Request for Quotation (RFQ). This solicitation document and incorporated provisions and clauses are those in effect through the Federal Acquisition Circular (FAC) 2005-29 & Defense Federal Acquisition Regulation Supplement Change Notice (DCN) 2009729. IAW 52.219-6 this Procurement will be a 100% set-aside for small business - the North American Industry Classification System code is 444130. The Contract will be a Firm Fixed Price Contract. The government reserves the right to award this requirement to more than one vendor or only one vendor. Description: The Contractor shall provide all labor, tools, materials, equipment, personnel and all other services required to provide the following items in support of US Forces Afghanistan: Line ItemItems / Salient CharacteristicsQtyUnit of IssueCostTotal Cost 100-41EAMUCTK : TOOL KIT OR EQUAL DESCRIPTION: MAIN CTK COMPLETE READY TO WORK IN ROLLING TOOL CABINET WITH HARDWOOD TOP. TOOL ETCHING AND FOD CONTROL TOOL FOAM INCLUDED. THE TOOL KIT SHALL INCLUDE THE FOLLOWING LIST OF ITEMS:2Each DescriptionPart #Qty Fluke 87V w/ case and leads99-87V2 8" Common SD 5/16"34-0076401 6" Common SD 1/4"34-0076351 4" Common SD 1/4"34-0076731 4" Common SD 3/16"34-0076101 4" Common SD 1/8"34-1100011 #0 Phillips SD 2.5"34-0087051 #1 Phillips SD 3"34-0087101 #3 Phillips SD 6"34-0087351 #2 Phillips SD 4"34-0087201 #2 Phillips SD 8"34-0314451 Can Opener99-CANOPEN1 Air Chuck67-259420431 Magnetic Pick-Up tool19-23751 Screw Starter19-98661 3 pc Easy Out in Case19-9500A1 25 Blade Feeler Gauge45-TP4621 Leatherman67-234011151 Tape Measure 25'67-234034251 Tire Cut Depth Gauge67-223591701 Stubby Common SD34-1100751 Stubby Phillips SD34-0087801 Scratch Awl51-8141 Common SD 5/16" x 1-3/4"34-0085091 Scraper19-23361 Cotter Key Extractor19-23061 Scribe51-801 Prop Fluid Dip Stick Pocket OnlyCustomer Supplied2 Mallet, Rubber 48oz reg/green 19-JSF2551 Ballpeen Hammer 12 oz19-1312PD1 3/4" Stubby Ratcheting Combo Wrench19-BW2222R1 11/16" Stubby Ratcheting Combo Wrench19-BW2220R1 5/8" Stubby Ratcheting Combo Wrench19-BW2218R1 9/16" Stubby Ratcheting Combo Wrench19-BW2216R1 1/2" Stubby Ratcheting Combo Wrench19-BW2214R1 7/16" Stubby Ratcheting Combo Wrench19-BW2212R1 3/8" Stubby Ratcheting Combo Wrench19-BW2210R1 5/16" Stubby Ratcheting Combo Wrench19-BW2208R1 1/4" Stubby Ratcheting Combo Wrench19-BW2206R1 3/4" Ratcheting Combo Wrench19-BW14241 11/16" Ratcheting Combo Wrench19-BW14221 5/8" Ratcheting Combo Wrench19-BW14201 9/16" Ratcheting Combo Wrench19-BW14181 1/2" Ratcheting Combo Wrench19-BW14161 7/16" Ratcheting Combo Wrench19-BW14141 3/8" Ratcheting Combo Wrench19-BW14121 11/32" Ratcheting Combo Wrench19-JSCV111 5/16" Ratcheting Combo Wrench19-BW14101 1/4" Ratcheting Combo Wrench19-BW14051 1/4 x 5/16 Open End Wrench19-30181 3/8 x 7/16 Open End Wrench19-30211 1/2 x 9/16 Open End Wrench19-30261 19/32 x 11/16 Open End Wrench99-W350381 9/16 x 5/8 Open End Wrench19-30301 5/8 x 3/4 Open End Wrench19-30311 1-1/16 x 1-1/8 Open End Wrench19-30501 3/4 x 7/8 Flare Nut Wrench47-16281 5/8 x 11/16 Flare Nut Wrench19-3772T1 1/2 x 9/16 Flare Nut Wrench19-3768T1 3/8 x 7/16 Flare Nut Wrench19-3764T1 1-1/16 Ratcheting Combo Wrench19-BW14341 1 Ratcheting Combo Wrench19-BW14321 15/16 Ratcheting Combo Wrench19-BW14301 7/8 Ratcheting Combo Wrench19-BW14281 13/16 Ratcheting Combo Wrench19-BW14261 11/16 x 13/16 Open End Wrench (SUB)19-30341 25/32 x 13/16 Open End Wrench (SUB)19-30371 3/4 x 7/8 Open End Wrench19-30391 1 x 15/16 Open End Wrench19-30451 1-7/16 x 1-3/8 Open End Wrench19-30602 Snap Ring Pliers Large19-385L1 Snap Ring Pliers Small19-399L1 9" Slider Bar19-54851 7" Slider Bar19-52851 4-1/2" Slider Bar19-47851 Arc Joint Pliers19-264SG1 Slip Joint Pliers19-276G1 Diagonal Cutters19-206G1 Offset Needle Nose Pliers 45 deg19-225G1 Vise Grip 10WR54-0502L31 Vise Grip 7WR54-0702L31 6" Flex T-Handle19-47661 10" Flex T-Handle19-52661 15" Flex T-Handle19-54671 Safety Wire Pliers 12" 19-1972 Safety Wire Pliers 8"19-1962 Robogrip Pliers Large99-10"1 Ignition Pliers19-2351 Robogrip Pliers Small99-7"1 3" Round Inspection Mirror48-UIM3252 8" Crescent Wrench19-7081 Camlock Pliers45-T7861 Fuse Puller48-FZ4B1 4" Punch53-250001 6" Center Punch53-240031 16" Pry Bar19-21421 1/2 x 1-1/4" Socket19-54401 1/2 x 1-3/16" Socket19-54381 1/2 x 1-1/8" Socket19-54361 1/2 x 1-1/16" Socket19-54341 1/2 x 1" Socket19-54321 1/2 x 15/16" Socket19-54301 1/2 x 7/8" Socket19-54281 1/2 x 13/16" Socket19-54261 1/2 x 25/32" Socket19-54251 1/2 x 3/4" Socket19-54241 1/2 x 11/16" Socket19-54221 1/2 x 21/32" Socket19-54211 1/2 x 5/8" Socket19-54201 1/2 x 19/32" Socket19-54191 1/2 x 9/16" Socket19-54181 1/2 x 1/2" Socket19-54161 1/2 x 7/16" Socket19-54141 1/2 x 3/8" Socket19-54121 3/8 x 1" Socket19-52321 3/8 x 15/16" Socket19-52301 3/8 x 7/8" Socket19-52281 3/8 x 13/16" Socket19-52261 3/8 x 3/4" Socket19-52241 3/8 x 11/16" Socket19-52221 3/8 x 5/8" Socket19-52201 3/8 x 9/16" Socket19-52181 3/8 x 1/2" Socket19-52161 3/8 x 7/16" Socket19-52141 3/8 x 3/8" Socket19-52121 3/8 x 5/16" Socket19-52101 3/8 x 1/4" Socket19-52081 1/2 x 3/4" Socket 6 Point19-5424H1 1/2 x 11/16" Socket 6 Point19-5434H1 1/2 x 5/8" Socket 6 Point19-5420H1 1/2 x 9/16" Socket 6 Point19-5418H1 1/2 x 1/2" Socket 6 Point19-5416H1 1/2 x 7/16" Socket 6 Point19-5414H1 3/8 x 1/2" Socket 6 Point19-5216H1 3/8 x 7/16" Socket 6 Point19-5214H1 3/8 x 3/8" Socket 6 Point19-5212H1 3/8 x 5/16" Socket 6 Point19-5210H1 3/8 x 1/4" Socket 6 Point19-5208H1 1/2 x 1-1/8" Socket Deep19-53361 1/2 x 1-1/16" Socket Deep19-53341 1/2 x 1" Socket Deep19-53321 1/2 x 15/16" Socket Deep 19-53301 1/2 x 7/8" Socket Deep19-53281 1/2 x 13/16" Socket Deep19-53261 1/2 x 3/4" Socket Deep19-53241 1/2 x 11/16" Socket Deep19-53221 1/2 x 5/8" Socket Deep19-53201 1/2 x 9/16" Socket Deep19-53181 1/2 x 1/2" Socket Deep19-53161 #1 Reversible Phillips Insert Bit 34-1357501 #2 Reversible Phillips Insert Bit34-1357611 1/4" Common Reversible Blade34-0572231 3/8" Common Reversible Blade34-0572351 Apex Container (Film Container)99-APEX container1 1/2 x 1-1/4" Socket19-54401 1/2 x 1-3/16" Socket19-54381 1/2 x 1-1/8" Socket19-54361 1/2 x 1-1/16" Socket19-54341 1/2 x 1" Socket19-54321 1/2 x 15/16" Socket19-54301 1/2 x 7/8" Socket19-54281 1/2 x 13/16" Socket19-54261 1/2 x 3/4" Socket19-54241 1/2 x 11/16" Socket19-54221 1/2 x 5/8" Socket19-54201 1/2 x 9/16" Socket19-54181 1/2 x 1/2" Socket19-54161 1/2 x 7/16" Socket19-54141 1/2 x 3/8" Socket19-54121 1/4 x 3/8" Adapter19-52561 3/8 x 1/2" Adapter19-52531 3/8 x 1/4" Adapter19-52551 3/8 x 7/8" Semi Deep Socket48-FSS2811 3/8 x 13/16" Semi Deep Socket48-FSS2611 3/8 x 3/4" Semi Deep Socket48-FSS2411 3/8 x 11/16" Semi Deep Socket48-FSS2211 3/8 x 5/8" Semi Deep Socket48-FSS2011 3/8 x 9/16" Semi Deep Socket48-FSS1811 3/8 x 1/2" Semi Deep Socket48-FSS1611 3/8 x 7/16" Semi Deep Socket48-FSS1411 3/8 x 3/8" Semi Deep Socket48-FSS1211 3/8 x 1" Socket19-52321 3/8 x 15/16" Socket19-52301 3/8 x 7/8" Socket19-52281 3/8 x 13/16" Socket19-52261 3/8 x 3/4" Socket19-52241 3/8 x 11/16" Socket19-52221 3/8 x 5/8" Socket19-52201 3/8 x 9/16" Socket19-52181 3/8 x 1/2" Socket19-52161 3/8 x 7/16" Socket19-52141 3/8 x 3/8" Socket19-52121 3/8 x 5/16" Socket19-52101 3/8 x 1/4" Socket19-52081 3/8 x 1" Socket Deep19-50321 3/8 x 15/16" Socket Deep19-50301 3/8 x 7/8" Socket Deep19-50281 3/8 x 13/16" Socket Deep19-50261 3/8 x 3/4" Socket Deep19-50281 3/8 x 11/16" Socket Deep19-50221 3/8 x 5/8" Socket Deep19-50201 3/8 x 9/16" Socket Deep19-50181 3/8 x 1/2" Socket Deep19-50161 3/8 x 7/16" Socket Deep19-50141 3/8 x 3/8" Socket Deep19-50121 1/4 x 5/16 Ratcheting Box Wrench19-1191T-A1 3/8 x 7/16 Ratcheting Box Wrench19-1192T-A1 1/2 x 9/16 Ratcheting Box Wrench19-1193T-A1 5/8 x 3/4 Ratcheting Box Wrench19-1196-A1 1/4 Ratchet19-4749XL1 3/8 Ratchet19-5249XC1 1/2 Ratchet19-54491 3/8 x 3/8-7/8 Crowsfoot 9pc19-49004CF1 1/2 x 15/16"-2-1/2" Crowsfoot 22pc19-53000CF1 3/8 x 5/8"-1-1/16" Flare Crowsfoot 8pc19-49000CFFN1 1/2 x 1-1/8"-2" Flare Crowsfoot 15pc19-53000CFFN1 1/4 x 9/16" Socket Deep19-4718LT1 1/4 x 1/2" Socket Deep19-4716LT1 1/4 x 7/16" Socket Deep19-4714LT1 1/4 x 3/8" Socket Deep19-4712LT1 1/4 x 11/32" Socket Deep19-4711LT1 1/4 x 5/16" Socket Deep19-4710LT1 1/4 x 9/32" Socket Deep19-4709LT1 1/4 x 1/4" Socket Deep19-4708LT1 1/4 x 7/32" Socket Deep19-4707LT1 1/4 x 3/16" Socket Deep19-4706LT1 1/4 x 9/16" Socket 19-4718T1 1/4 x 1/2" Socket 19-4716T1 1/4 x 7/16" Socket 19-4714T1 1/4 x 3/8" Socket 19-4712T1 1/4 x 11/32" Socket 19-4711T1 1/4 x 5/16" Socket 19-4710T1 1/4 x 9/32" Socket 19-4709T1 1/4 x 1/4" Socket 19-4708T1 1/4 x 7/32" Socket 19-4707T1 1/4 x 3/16" Socket 19-4706T1 1/4 x 5/32" Socket 19-4705T1 Reversible Apex Drive34-0032631 Mechanical Fingers19-23441 3/8 x 3/8" Hex Bit Socket19-4990 3/81 3/8 x 5/16" Hex Bit Socket19-4990 5/161 3/8 x 1/4" Hex Bit Socket19-4990 1/41 3/8 x 7/32" Hex Bit Socket19-4990 7/321 3/8 x 3/16" Hex Bit Socket19-4990 3/161 3/8 x 5/32" Hex Bit Socket19-4990 5/321 3/8 x 3/4" Universal socket 6 Point19-5279H1 3/8 x 11/16" Universal socket 6 Point19-5278H1 3/8 x 5/8" Universal socket 6 Point19-5277H1 3/8 x 9/16" Universal socket 6 Point19-5276H1 3/8 x 1/2" Universal socket 6 Point19-5275H1 3/8 x 7/16" Universal socket 6 Point19-5274H1 3/8 x 3/8" Universal socket 6 Point19-5273H1 1/2 Universal 19-5470A1 3/8 Universal19-5270A1 1/4 Universal19-4770A1 3/8 Apex Holder34-0427552 1/4 x 9/16" Universal socket 6 Point48-TMUS181A1 1/4 x 1/2" Universal socket 6 Point48-TMUS161A1 1/4 x 7/16" Universal socket 6 Point19-47741 1/4 x 3/8" Universal socket 6 Point19-47731 1/4 x 11/32" Universal socket 6 Point48-TMUS111A1 1/4 x 5/16" Universal socket 6 Point19-47721 1/4 x 1/4" Universal socket 6 Point19-47711 1/4 x 3/16" Universal socket 6 Point48-TMUS61A1 1/2 Speeder19-54802 3/8 Speeder19-52801 13pc Hex Key Set w/ holder51-121371 Goggles67-1176811 Wera Bit Holder34-6721461 Common BitCustomer Supplied1 #3 Phillips Bit ACRCustomer Supplied2 #2 Phillips Bit ACRCustomer Supplied2 #1 Phillips Bit ACRCustomer Supplied2 #4 Phillips Bit ACRCustomer Supplied2 5/8 x 11/16 Offset Box Wrench19-8183A1 1/2 x 9/16 Offset Box Wrench19-81811 3/8 x 7/16 Offset Box Wrench19-81801 Johnson Bar El Brutus99-BRUT-51 1/2 x 10" Extension19-54631 1/2 x 6" Extension 19-54611 1/2 x 3" Extension19-54601 3/8 x 10" Extension 19-52621 3/8 x 6" Extension19-5260-061 3/8 x 3" Extension19-52601 3/8 x 1" Extension 19-52591 1/4 x 4" Flex Extension 6" 19-47651 1/4 x 6" Extension19-47611 1/4 x 3" Extension19-47601 1/4 x 1-1/2" Extension19-47591 Aircraft Marshalling Wands LED 12" Red57-2330-2322OR4 Surefire Ultra 2 LED Flashlight99-SFU2LED3 Surefire M3 Turbo Head Combat Lights99-SFM3TURBO2 Safety Wire Pocket OnlyN/A3 Tool Bag99-TOOLBAG1 Reflective Vest99-VEST1 Marshalling Paddles Bright Orange99-AMPOR2 FOD BAG99-FODBAG1 370 Each Kit Shall also include the items listed below: Vidmar Rolling Tool Chest57-0450 Foam 370 Tools and 5000 sq/in99-Toolfoam Template Development and Layout99-Layout Tool Etching99-Tooletch Hard Back Pocket Nomenclature99-HBETCH All items must be delivered to Bagram Airfield, Afghanistan within 60 days after award. The Government requires the list of items above to be delivered to Bagram Air Field, Afghanistan, at the following address: 455 EMXG/EAMXS Bldg. 34572 Bagram Airfield, Afghanistan APO AE 09352 PLEASE QUOTE ACCORDING TO THE SPECIFICATIONS. PRODUCT PROPOSALS SUBMITTED THAT DO NOT CONFORM TO SPECIFICATIONS WILL NOT BE CONSIDERED. PLEASE DESCRIBE YOUR PRODUCTS IN AS MUCH DETAIL AS POSSIBLE, INCLUDING BUT NOT LIMITED TO BRAND NAME MODEL NUMBERS, AND SPECIFICATIONS. TECHNICAL SPECIFICATIONS OF ALL EQUIPMENT MUST BE INCLUDED WITH QUOTATION. ALL QUOTES MUST INCLUDE A DELIVERY SCHEDULE AND TIME FRAME. Brand Name or Equal THE ABOVE REQUESTED PRODUCTS STATED ARE ALL USED FOR COMPARISON, ANY "OR EQUAL" ITEMS WILL BE ACCEPTABLE IF DEEMED SO BY THE CONTRACTING OFFICE, AND THE END USER. "OR EQUAL" ITEMS MUST BE THE SAME OR COMPARABLE SPECIFICATIONS TO THE ABOVE MENTIONED PRODUCTS. Any "or equal" items must follow instruction in FAR 52.211-6, Brand name or Equal as follows: a) If an item in this solicitation is identified as "brand name or equal," the purchase description reflects the characteristics and level of quality that will satisfy the Government's needs. The salient physical, functional, or performance characteristics that "equal" products must meet are specified in the solicitation. (b) To be considered for award, offers of "equal" products, including "equal" products of the brand name manufacturer, must- (1) Meet the salient physical, functional, or performance characteristic specified in this solicitation; (2) Clearly identify the item by- (i) Brand name, if any; and (ii) Make or model number; (3) Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and (4) Clearly describe any modification the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modification. (c) The Contracting Officer will evaluate "equal" products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer. (d) Unless the offeror clearly indicates in its offer that the product being offered is an "equal" product, the offeror shall provide the brand name product referenced in the solicitation. The following FAR provisions also apply to this acquisition: FAR 52.212-1, Instructions to Offerors Commercial Items; Quotes submitted shall contain the following information: Reference number, offeror's name and contact information, terms of the expressed warranty, price, any discount terms and acknowledgement of all solicitation amendments (if applicable). Quotes shall also contain all other documentation specified herein: Period of Acceptance for Offerors - The offeror agrees to hold the prices in its offer firm for 90 calendar days from the date specified for receipt of offers, unless another time period is stated in an addendum to the solicitation. Any "or equal" items must follow instruction in FAR 52.211-6, Brand name or Equal as follows: a) If an item in this solicitation is identified as "brand name or equal," the purchase description reflects the characteristics and level of quality that will satisfy the Government's needs. The salient physical, functional, or performance characteristics that "equal" products must meet are specified in the solicitation. (b) To be considered for award, offers of "equal" products, including "equal" products of the brand name manufacturer, must- (1) Meet the salient physical, functional, or performance characteristic specified in this solicitation; (2) Clearly identify the item by- (i) Brand name, if any; and (ii) Make or model number; (3) Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and (4) Clearly describe any modification the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modification. (c) The Contracting Officer will evaluate "equal" products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer. (d) Unless the offeror clearly indicates in its offer that the product being offered is an "equal" product, the offeror shall provide the brand name product referenced in the solicitation. The following FAR provisions also apply to this acquisition: FAR 52.212-1, Instructions to Offerors Commercial Items; Quotes submitted shall contain the following information: Reference number, offeror's name and contact information, terms of the expressed warranty, price, any discount terms and acknowledgement of all solicitation amendments (if applicable). Quotes shall also contain all other documentation specified herein: Period of Acceptance for Offerors - The offeror agrees to hold the prices in its offer firm for 90 calendar days from the date specified for receipt of offers, unless another time period is stated in an addendum to the solicitation The following FAR provisions also apply to this acquisition: FAR 52.212-1, Instructions to Offerors Commercial Items; Quotes submitted shall contain the following information: Reference number, offeror's name and contact information, terms of the expressed warranty, price, any discount terms and acknowledgement of all solicitation amendments (if applicable). Quotes shall also contain all other documentation specified herein: Period of Acceptance for Offerors - The offeror agrees to hold the prices in its offer firm for 90 calendar days from the date specified for receipt of offers, unless another time period is stated in an addendum to the solicitation. Evaluation Criteria: The Government will award a contract resulting from this solicitation to the responsible offeror whose quotation meets or exceeds the stated salient characteristic - at the lowest price. All offerors must include a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items, 252.212-7000, Offeror Representations and Certification - Commercial Item, 252.225-7020, Trade Agreements Certificate, with their offer. FAR 52.252-1 Provisions Incorporated by Reference. This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address (es): http://farsite.hill.af.mil The following clauses are hereby incorporated by reference: FAR 52.212-4, Contract Terms and Conditions - Commercial Items, FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items applies to this acquisition. Additional FAR clauses cited in the clause applicable to this acquisition are: (b) 1, 19, 20, 21, 22, 24, and 34. DFARS 252.204-7004 Alt A, Central Contractor Registration (52.204-7). DFARS 252.212-7001, Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items. Additional DFARS clauses cited in the clause applicable to this acquisition are: (a), (b) 1, 11, 24. Electronic mail quotations will be accepted. NOTE: ALL OFFERORS MUST BE REGISTERED IN THE CENTRAL CONTRACTOR REGISTRATION (CCR) BEFORE BEING CONSIDERED FOR AWARD. Information concerning CCR requirements may be viewed via the Internet at http://www.ccr.gov or by calling the CCR Registration Center at 1-888-227-2423. Offerors shall include completed copy of the Online Offeror Representations and Certifications Application if you are NOT already ORCA registered. Please refer to http://orca.bpn.gov/login.aspx for information regarding the Online Representation and Certification Application process. Offers are due 12:00 pm CST 16 September 2011. Quotations may be submitted to Keisha Robinson via e-mail to Keisha.n.robinson.mil@mail.mil.
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/notices/7b2087c2292b31f67b72cd208220f5c2)
 

Place of Performance

Address: ACC - Rock Island - C3 (ACC-RI-C3) Bldg 60, 3rd Floor Rock Island IL

Zip Code: 52807
 

Record

SN02565675-W 20110909/110907235754-7b2087c2292b31f67b72cd208220f5c2 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |